About Anphas Company Limited - Plywood Supplier in Viet Nam

Anphas Company Limited operates from Viet Nam and currently lists seven active products in its catalogue. The company’s catalogue focuses on engineered wood products, specifically various grades of plywood, veneer sheets and a finger‑joint blockboard, each identified by its functional description rather than a brand name. The listed items include Container Flooring Plywood, Core Veneer, Furniture Plywood, Commercial Plywood, Packing Plywood, Film Faced Plywood/Shuttering and Finger Joint Blockboard. No additional product categories are detailed beyond these seven entries, and no HS‑code references are provided in the source data.

The supplier’s top categories are recorded as Plywood, Veneer and Turmeric, although only the wood‑based items appear in the active product list. Each plywood entry corresponds to a typical use case - flooring, furniture, commercial construction or packing - while the Core Veneer and Film Faced variants indicate specialty applications such as surface finishing or concrete shuttering. The Finger Joint Blockboard combines multiple veneer layers with finger‑jointed edges for larger panel sizes. All products are sourced and manufactured in Viet Nam, positioning the company within the regional wood panel supply chain.

Product Range and Specialties of Anphas Company Limited

The catalogue covers a spectrum of plywood grades that are common in the global market. Container Flooring Plywood and Commercial Plywood are usually produced to meet BS 1088‑type specifications, with thicknesses ranging from 12 mm to 25 mm, moisture content around 8‑12 %, and formaldehyde emission classes of E1 or E0. Furniture Plywood typically follows the higher‑grade BWR or CWR standards, offering smoother face veneers and tighter tolerances for interior joinery. Packing Plywood is often supplied in lower‑grade CWR or DWR, emphasizing cost‑effectiveness for temporary packaging. Film Faced Plywood/Shuttering combines a phenolic film layer on one side to resist concrete pressure, a standard choice for formwork in construction. Core Veneer and Finger Joint Blockboard are manufactured from thin veneer sheets bonded with phenol‑formaldehyde resin; blockboard panels commonly reach 12 mm to 20 mm thickness and are used for doors, panels and large‑area flooring. Industry practice also includes optional certifications such as FSC or PEFC for sustainable sourcing, and CARB Phase 2 compliance for low‑formaldehyde emissions.

Trade and Export Information - Anphas Company Limited

Vietnam is a major exporter of wood panel products in Southeast Asia, with the majority of shipments destined for East Asian markets (China, South Korea, Japan), the European Union and the Middle East. Buyers typically request documentation that complies with the HS chapter 44 (especially HS 4409 for plywood and HS 4412 for veneer and blockboard), along with phytosanitary certificates to meet import plant‑health regulations. Commonly required certifications include ISO 9001 quality management, FSC or PEFC chain‑of‑custody, and CARB Phase 2 or EU EUTR compliance for formaldehyde emissions. Plywood is usually packed in 1 m × 1 m bundles, wrapped in plastic film, and loaded on 20‑ft or 40‑ft containers; blockboard and veneer sheets are often palletised on Euro‑pallets. Standard Incoterms used by Vietnamese wood panel exporters are FOB Hai Phong or CIF to the buyer’s destination port, with freight forwarding handled by third‑party logistics providers.

Sourcing from Anphas Company Limited - Buyer Guidance

When sourcing plywood or veneer from Anphas Company Limited, buyers should request the specific grade sheet (e.g., BWR, CWR, MR) and verify thickness, moisture content and formaldehyde emission class (E0/E1). Samples of each panel type should be examined for veneer face quality, edge straightness and bond integrity before confirming larger orders. Buyers are advised to obtain a full test report covering dimensional stability, tensile shear strength and any applicable environmental certifications (FSC, CARB, ISO 9001). Confirmation of packaging method - whether bundled, palletised or film‑faced - helps plan container loading and protects against moisture damage during transit. Finally, requesting the phytosanitary certificate and the HS‑code declaration ensures smooth customs clearance at the destination.

What types of plywood does Anphas Company Limited list in its catalogue?

The catalogue includes Container Flooring Plywood, Furniture Plywood, Commercial Plywood, Packing Plywood and Film Faced Plywood/Shuttering, each described by its intended application rather than a specific grade.

Does the supplier provide veneer products?

Yes, the catalogue lists Core Veneer, which is a thin plywood sheet used for surface finishing or as a substrate for laminates.

Is blockboard available from this supplier?

The catalogue mentions Finger Joint Blockboard, which is produced by joining multiple veneer layers with finger joints to create larger panels.

What documentation should a buyer request before purchasing?

Buyers should ask for grade specifications, moisture content data, formaldehyde emission class (E0/E1), FSC or PEFC certificates if sustainability is required, and a phytosanitary certificate for export.

What are the typical packaging methods for the listed wood products?

Plywood panels are usually bundled in 1 m × 1 m packs and wrapped in plastic film; blockboard and veneer sheets are commonly palletised on standard Euro‑pallets for container loading.

Which HS‑code families are associated with these products?

Wood panel products such as plywood fall under HS 4409, while veneer and blockboard are classified under HS 4412, which are the standard codes used by exporters from Viet Nam.

What Incoterms are commonly used for shipping Vietnamese plywood?

Exporters from Viet Nam typically operate on FOB Hai Phong or CIF to the buyer’s destination port, allowing the buyer to arrange freight or receive a delivered‑cost shipment.

What typical quality standards apply to the plywood listed?

Industry standards include BS 1088 for structural plywood, moisture content of 8‑12 %, and formaldehyde emission limits of E1 (0.124 mg/L) or E0 (0.05 mg/L) for low‑VOC requirements.