About Hebei Cijin Metal Wire Mesh Products Co., Ltd. - Wires & Cables Supplier in China

China‑based Hebei Cijin Metal Wire Mesh Products Co., Ltd. lists eight distinct wire and mesh items in its catalogue. The active product count of 8 includes galvanized wire, black annealed wire, PVC‑coated wire, U‑type wire, cut wire, tie wire, stainless steel wire mesh and stainless steel wire, all classified under the broader Wires & Cables category. Each entry reflects a specific material treatment or form used in construction, fencing, agricultural and industrial applications. The supplier’s catalogue does not provide HS codes, so the products are generally covered by HS Chapter 73 for iron and steel articles.

The catalogue focuses on both carbon‑steel and stainless‑steel products. Galvanized, black annealed, PVC‑coated, U‑type, cut and tie wires are typical carbon‑steel offerings, while the stainless steel wire mesh and wire represent corrosion‑resistant grades used where durability is critical. The range spans raw wire forms to finished mesh panels, giving buyers a concise selection of eight wire‑related products without additional product families or accessories.

Product Range and Specialties of Hebei Cijin Metal Wire Mesh Products Co., Ltd.

The listed wire types correspond to common industry grades. Galvanized wire usually carries a zinc coating of 50 - 150 g/m² and conforms to ASTM A795 or ISO 1461 for corrosion protection. Black annealed wire is typically a carbon‑steel grade with tensile strength of 400 - 600 MPa and surface hardness around 150 HB, meeting ASTM A110. PVC‑coated wire often features a PVC layer of 0.3 - 0.8 mm thickness, complying with IEC 60228 for electrical conductivity. U‑type and cut wires are supplied in standard diameters from 1.0 mm to 6.0 mm, suitable for fencing and reinforcement. Tie wire is commonly 0.8 - 2.0 mm in diameter and used for agricultural binding. Stainless steel wire mesh generally uses 304 or 316 grades with mesh openings between 1 mm and 10 mm, and stainless steel wire follows ASTM A276 for round bar dimensions.

Trade and Export Information - Hebei Cijin Metal Wire Mesh Products Co., Ltd.

China is a major exporter of wire and mesh products, with shipments frequently destined for Southeast Asia, the Middle East, Africa and Europe. The carbon‑steel wires fall under HS 7305 (“Other wire”) while stainless‑steel wire mesh is classified under HS 7308 (“Wire mesh of iron or steel”). Buyers typically request ISO 9001 quality management certification, CE marking for EU markets, and RoHS compliance for electronic‑related uses. Standard export packaging includes bundled wire on wooden pallets, mesh panels in wooden crates, and moisture‑resistant liners for stainless steel items; containers are usually 20‑ft or 40‑ft with FOB or CIF terms negotiated.

Sourcing from Hebei Cijin Metal Wire Mesh Products Co., Ltd. - Buyer Guidance

When sourcing these wires, request mill test certificates that detail chemical composition, tensile strength and coating thickness. For stainless steel items, a material certificate confirming 304/316 grade and a corrosion‑resistance test report are standard. Verify that the supplier can provide samples in the required diameters or mesh sizes, and confirm packaging specifications such as bundle weight (typically 500 kg per pallet) and container loading plans before finalizing the order.

What wire diameters are available in the Hebei Cijin catalogue?

The catalogue lists standard carbon‑steel wire diameters ranging from 1.0 mm to 6.0 mm for cut, tie and U‑type wires, and stainless‑steel wire diameters that follow ASTM A276 dimensions, commonly 1.0 mm to 4.0 mm.

Which coating standards apply to the PVC‑coated wire?

PVC‑coated wire typically complies with IEC 60228 for electrical conductivity and the PVC layer thickness is usually 0.3 - 0.8 mm, meeting ISO 9001 quality requirements when documented.

What HS codes should I reference when importing these products?

Carbon‑steel wires such as galvanized, black annealed, PVC‑coated, U‑type, cut and tie wires are generally classified under HS 7305, while stainless‑steel wire mesh falls under HS 7308.

Are there common certifications I should ask the supplier to provide?

Buyers normally request ISO 9001 for quality management, CE marking for EU entry, and RoHS compliance when the wires are intended for electronic applications.

What is a typical packaging method for stainless‑steel wire mesh?

Stainless‑steel mesh is usually packed in wooden crates with internal cushioning, placed on pallets, and sealed with moisture‑resistant film to protect against corrosion during sea freight.

What minimum order quantities are typical for these wire products?

MOQ varies by product; cut and tie wires often start at 500 kg per order, while stainless‑steel mesh may require a minimum of one full 20‑ft container (approximately 12 tons).

What lead time should I expect for production and shipment?

Lead times for standard carbon‑steel wires are typically 15 - 25 working days, whereas stainless‑steel mesh, due to additional finishing steps, may require 30 - 45 working days before shipment.