About Trade Links GMBH - Medical Supplies & Disposable Supplier in Germany

Germany‑based Trade Links GMBH lists 60 active products across several food and medical categories. The catalogue includes multiple disposable face‑mask variants, non‑woven SMS and melt‑blown fabrics, PVC face shields, hand‑sanitizer gels, confectionery spreads, and a limited selection of fresh‑food items such as beef and fruits. Each mask entry references a three‑layer construction, with melt‑blown layers rated at BFE 95 % in the product titles, indicating a bacterial filtration efficiency commonly required for medical‑grade masks. The non‑woven fabrics are described as spunbond, SMS, and melt‑blown, which are standard raw materials for protective apparel and filtration media. The food items are presented as spreadable creams and flavored drinks, reflecting the company’s broader FMCG portfolio.

Product Range and Specialties of Trade Links GMBH

The listed medical‑grade items consist of anti‑dust three‑layer disposable masks, surgical‑type masks with earloops, and melt‑blown fabrics marketed with a BFE 95 % rating. In the non‑woven sector the supplier names spunbond SMS fabric, raw SMS material, and high‑efficiency melt‑blown fabric, all typical polypropylene web products used in mask cores and filtration panels. Industry practice classifies such melt‑blown fabrics by basis weight (usually 20‑40 g/m²) and by bacterial filtration efficiency (BFE 95 % or higher) to meet EN 14683 Level 2 or ASTM F2100 Level 2 standards. PVC face shields are offered in reusable and disposable formats; these are generally produced from 0.5‑1.0 mm clear PVC sheets and conform to EN 166 impact‑resistance requirements. Hand‑sanitizer bottles and bulk travel‑size gels follow WHO‑recommended alcohol concentrations of 60‑80 % ethyl or isopropyl alcohol, and the confectionery spreads are typical sugar‑based nut pastes with standard shelf‑life packaging. The food catalogue also includes a spreadable Nutella‑type cream, which in the EU is usually formulated to meet EU Regulation 1169 on food information and allergen labeling.

Trade and Export Information - Trade Links GMBH

German exporters of medical non‑wovens and disposable PPE typically ship to EU member states, the Middle East, North Africa, and Southeast Asia, where demand for BFE 95 % melt‑blown fabric and three‑layer masks remains strong. The HS‑code families for these products fall under Chapter 90 (medical instruments) for masks (HS 9004.90) and Chapter 59 (non‑woven fabrics) for SMS and melt‑blown web (HS 5903). Buyers usually request CE marking, ISO 13485 quality‑management certification, and test reports confirming BFE, particle filtration efficiency (PFE) and differential pressure (ΔP). PVC face shields are classified under HS 3920 (plastic plates, sheets, films) and often require EN 166 compliance and a Declaration of Conformity. Hand‑sanitizer liquids are covered by HS 3808 and must meet EU Cosmetics Regulation 1223/2009 as well as REACH safety dossiers. German export logistics favour 20‑foot or 40‑foot containers with palletised cartons, and Incoterms such as FCA or DAP are commonly used for bulk shipments.

Sourcing from Trade Links GMBH - Buyer Guidance

When sourcing masks or melt‑blown fabric from Trade Links GMBH, request the latest CE Declaration of Conformity and ISO 13485 certification to verify compliance with European medical‑device regulations. Ask for independent laboratory test reports that detail BFE ≥ 95 %, PFE ≥ 95 % (if applicable), and ΔP values for the non‑woven layers, as these parameters determine mask breathability and filtration performance. For PVC face shields, obtain EN 166 impact‑test certificates and material safety data sheets (MSDS) confirming PVC grade and lead‑free status. Hand‑sanitizer orders should be accompanied by a product safety data sheet, alcohol‑content analysis, and a microbiological efficacy report consistent with WHO guidelines. Verify packaging specifications - e.g., masks in sealed poly‑bag packs of 50 pcs, fabrics on bulk rolls of 30 m length, and liquids in HDPE bottles - before confirming order quantities.

What mask types are listed by Trade Links GMBH?

The catalogue includes anti‑dust three‑layer disposable masks, earloop surgical masks, and antibacterial breathable masks, all described as three‑layer constructions with a melt‑blown filter layer.

Which filtration efficiency is claimed for the melt‑blown fabrics?

All melt‑blown fabric entries specify a BFE of 95 %, which aligns with typical EN 14683 Level 2 requirements for bacterial filtration.

What material is used for the face shields?

The face shields are described as PVC, a clear polymer sheet commonly supplied in 0.5‑1.0 mm thickness for reusable or disposable protection.

What certifications should a buyer request for the medical products?

Buyers should ask for CE marking, ISO 13485 compliance, and laboratory test reports covering BFE, PFE and differential pressure for masks and fabrics.

Are there any standard packaging formats for the non‑woven fabrics?

Industry practice for SMS and melt‑blown fabrics is to ship on rolled webs, typically 30 m long, packed in cardboard tubes or bulk cartons.

What regulatory standards apply to the hand‑sanitizer gels?

Hand‑sanitizers fall under HS 3808 and must comply with EU Cosmetic Regulation 1223/2009, including a safety data sheet, alcohol‑content analysis (60‑80 % v/v) and microbiological efficacy testing.

Which markets commonly import German‑origin medical PPE?

Typical import markets include EU countries, the Middle East, North Africa and Southeast Asian nations that require CE‑certified PPE for healthcare and industrial use.

What are the usual incoterms for bulk shipments from Germany?

Exporters often use FCA (Free Carrier) to a German port or DAP (Delivered at Place) to the buyer’s destination, combined with containerised transport.