About PT Mido Agung Perkasa - Cable Supplier in Indonesia

Indonesia, Jakarta, supplier PT Mido Agung Perkasa lists 14 active products across telecommunication cables, optical fiber cables, cable assemblies, computer cables, wires & cables, steel wires, industrial wires & cables, and iron wire. The catalogue includes items such as SUPREME Bare Conductor, Building Wire and Enamelled Wire, all coded under HS 7408.19 and made of copper, as well as a range of copper‑based cables - Fiber Optics, Fire‑Resistant, High Voltage, Instrumentation, Low Voltage, Medium Voltage and Telecommunication - classified under HS 8544.70, 8544.49 and 8544.60. Four entries - Low Voltage Cables, Medium Voltage Cables, High Voltage Cables and Fiber Optics Cable - are listed without HS codes in the source data. The product set reflects standard copper conductor and cable families used in building, power transmission and telecom infrastructure. The supplier’s top categories match the catalogue: Telecommunication Cables, Optical Fiber Cables, Cable Assemblies, Computer Cables, Wires & Cables, Steel Wires, Industrial Wires & Cables, and Iron Wire. All listed items are manufactured from copper, with steel and iron wire categories implied by the top‑category list but not detailed in the product list. The 14 items cover a spectrum from bare conductors to fire‑resistant and high‑voltage insulated cables, each falling under HS chapter 74 for copper wire or HS chapter 85 for insulated cables. PT Mido Agung Perkasa operates as the official exporter for the SUPREME Cable brand in Indonesia.

Product Range and Specialties of PT Mido Agung Perkasa

The catalogue groups products into three material families: copper bare conductors (HS 7408.19), copper‑based insulated power and telecom cables (HS 8544.49, 8544.60, 8544.70) and a fiber‑optic line listed under HS 8544.70. In the industry, copper conductors are typically required to meet IEC 60228 (Class 1 or 2) with a minimum copper purity of 99.9 %. Power cables are commonly produced to IEC 60502 specifications, offering voltage ratings of 0.6/1 kV (low voltage), 1 - 35 kV (medium voltage) and 35 - 230 kV (high voltage), with jackets of PVC, XLPE or fire‑resistant compounds. Fire‑resistant cables usually comply with IEC 60332 fire‑propagation tests. Optical fiber cables are built to IEC 60794 standards, with typical core diameters of 9 µm (single‑mode) or 50 µm (multimode) and protective jackets of LSZH or PVC. Buyers generally look for data sheets that specify conductor cross‑section (mm²), tensile strength (MPa), insulation thickness, and temperature rating (°C).

Trade and Export Information - PT Mido Agung Perkasa

Indonesia ranks among the world’s top exporters of copper wire and insulated cables, shipping primarily to Southeast Asian markets, the Middle East, Africa and Europe. HS chapter 74 (7408.19) covers copper wire rods, bars and profiles, while HS chapter 85 (8544.xx) covers insulated electric conductors, with sub‑headings .49 for fire‑resistant or low‑voltage cables, .60 for medium‑voltage, and .70 for fiber‑optic and telecom cables. Importers typically require IEC conformity, ISO 9001 quality‑management certification, and compliance with RoHS and CE marking for European shipments. Common logistics involve coil packaging on wooden pallets, loaded into 20‑ft or 40‑ft containers, with FOB Jakarta or CIF destination ports. Indonesian exporters often provide pre‑shipment inspection reports such as SGS or Bureau Veritas to satisfy buyer due‑diligence.

Sourcing from PT Mido Agung Perkasa - Buyer Guidance

When sourcing from PT Mido Agung Perkasa, request the product data sheet that lists IEC class, copper purity, voltage rating, jacket material and fire‑test results. Ask for a recent test report confirming compliance with IEC 60228 for conductors and IEC 60332 for fire‑resistant cables, as well as a RoHS declaration if the buyer’s market requires it. Verify the HS code and material description on the commercial invoice to ensure correct tariff treatment. Typical minimum order quantities range from 5 000 m to 20 000 m per cable type, with a lead time of 30‑45 days after order confirmation. Shipping is usually in wooden crates or coil‑on‑pallets, protected against moisture, and can be quoted on FOB Jakarta or CIF to the buyer’s port.

What cable categories does PT Mido Agung Perkasa list in its catalogue?

The catalogue includes copper bare conductors, building wire, enamelled wire, and a range of insulated cables such as fiber optics, fire‑resistant, low‑voltage, medium‑voltage, high‑voltage, instrumentation and telecommunication cables.

Which HS codes are associated with the listed products?

Copper bare conductors, building wire and enamelled wire use HS 7408.19. Insulated cable families use HS 8544.49 for fire‑resistant and low‑voltage lines, HS 8544.60 for medium‑voltage lines and HS 8544.70 for fiber‑optic and telecommunication cables.

What material is specified for the listed products?

All products that include an HS code are specified as copper; the fibre‑optic line also references copper in the source data, consistent with copper‑clad optical cable constructions.

Which certifications should a buyer request for these cable types?

Buyers should request IEC conformity certificates (e.g., IEC 60228 for conductors, IEC 60502 for power cables, IEC 60794 for fiber optics), an ISO 9001 quality‑management certificate, and a RoHS compliance statement where applicable.

What typical specifications do buyers check for copper power cables?

Buyers usually verify copper purity (≥99.9 %), conductor cross‑section (mm²), voltage rating (0.6/1 kV, 1‑35 kV, 35‑230 kV), jacket material (PVC, XLPE, fire‑resistant compounds), tensile strength (≥200 MPa) and temperature rating (70‑90 °C).

What are common packaging and shipping methods for these cables?

Cables are typically coiled on wooden pallets, wrapped in moisture‑barrier film, and loaded into 20‑ft or 40‑ft containers. Shipping terms frequently used are FOB Jakarta or CIF to the buyer’s destination port.

What lead time and minimum order quantities are typical?

Lead times are generally 30‑45 days after order confirmation. Minimum order quantities commonly range from 5 000 m to 20 000 m per cable type, depending on the grade and specification.

How can a buyer obtain samples before placing a full order?

Buyers can request a short‑length sample (e.g., 10‑20 m) of the specific cable type, accompanied by the relevant test report and data sheet, to evaluate conformity with required standards before confirming the full order.