About Emarc India - Industrial Chemicals Supplier in India

India, located in South Asia, hosts Emarc India with an active catalogue of 341 distinct products. The supplier lists items across galvanized steel products - including plates, coils, pipes, tubes, wire and tape - as well as a variety of industrial chemicals such as calcium bromide (liquid and powder), zinc bromide, butyl‑phosphate defoamer, biocides, calcium carbonate and causticized potassium lignite. Mineral offerings include mica blocks, sheets, powder and flakes, quartz and silica in granule, grit and lump forms, and other ores. Each product family aligns with standard HS code chapters: Chapter 72 for steel articles and Chapter 38 for organic and inorganic chemicals, while minerals fall under Chapter 25. The catalogue reflects a broad mix of metal processing and non‑metal raw materials that Indian exporters commonly produce for global markets.

The product list also contains water‑treatment chemicals and petroleum by‑products, extending the supplier’s scope beyond basic construction steel. Emarc India serves buyers across Asia, the Middle East, North America, Latin America, Europe and Africa, indicating a diversified export footprint. No specific certifications are claimed in the supplied data, so buyers typically verify compliance with ISO‑9001 quality management, REACH registration for chemicals, and ASTM or EN standards for steel. The supplier’s tier is recorded as “imported” with a “harbor” trust level, suggesting a middle‑range reliability rating within the platform’s classification system.

Product Range and Specialties of Emarc India

The steel portfolio comprises hot‑rolled and hot‑dipped galvanized items such as plates, sheets, angles, bars, coils, pipes, tubes, wire and tape. In international trade, galvanized steel is usually supplied to meet ASTM A123/A153 or EN 14600 specifications, with zinc coating thickness ranging from 45 µm for light‑gauge sheet to 150 µm for structural sections. Buyers often request mill certificates indicating tensile strength (e.g., 350 - 550 MPa for hot‑rolled steel) and corrosion‑resistance tests. The chemical segment features calcium bromide and zinc bromide in both liquid and powder forms, typically graded for industrial use with purity levels of 99 % or higher, and a butyl‑phosphate based defoamer formulated for oil‑field or water‑treatment applications. Standard test reports include SDS, heavy‑metal analysis and moisture content. Mineral products such as mica sheets, powder and flakes are supplied in grades defined by particle size (e.g., 0.1 - 0.5 mm for powder) and electrical insulation properties, while silica and quartz granules are categorized by mesh size (e.g., 200 mesh) and silica purity (typically 95‑99 %).

Trade and Export Information - Emarc India

India is a major exporter of galvanized steel, with annual shipments valued in the multi‑billion‑dollar range. Steel items classified under HS 7208‑7209 are commonly shipped in 20‑ft or 40‑ft containers, using C‑framing or flat‑rack packaging to protect surface coating. European and Middle‑East construction firms, as well as North‑American infrastructure projects, constitute the principal demand base. For industrial chemicals under HS 3824, buyers usually require compliance with REACH (EU) and TSCA (US) regulations, and they often request certificates of analysis (CoA) and third‑party laboratory test reports before loading. Minerals such as mica and silica fall under HS 2504‑2505; Indian exporters typically provide bulk shipments in woven polypropylene bags (25 kg) or bulk silos, with moisture content below 2 % to meet electronic‑industry specifications. Common Incoterms include FOB Kolkata or Mumbai, with buyers arranging container freight onward.

Sourcing from Emarc India - Buyer Guidance

When sourcing galvanized steel from Emarc India, request the mill test certificate that lists chemical composition, coating thickness, tensile strength and dimensional tolerances. Verify that the product conforms to the relevant ASTM or EN standard cited in the certificate; discrepancies in coating weight can affect corrosion performance. For chemical products like calcium bromide, ask for a current safety data sheet, certificate of analysis, and proof of REACH registration if the destination is the EU. Moisture and impurity levels should be confirmed through an independent assay before final acceptance. Sample quantities of 5 - 10 kg for chemicals or a single steel coil (≈1 ton) are typical for performance validation. Ensure that packaging meets the buyer’s handling requirements - steel wrapped in anti‑rust film, chemicals in sealed drums (e.g., 200 L) and minerals in moisture‑proof bags.

What steel products does Emarc India offer and under which HS codes?

The catalogue lists galvanized steel plates, sheets, angles, bars, coils, pipes, tubes, wire and tape, which are classified under HS Chapter 72 (e.g., 7208 for plates and sheets, 7209 for bars and rods).

Which grades and standards apply to the galvanized steel items?

Typical exports meet ASTM A123/A153 or EN 14600 specifications, with zinc coating thickness from 45 µm (sheet) to 150 µm (structural sections) and tensile strength between 350 MPa and 550 MPa.

What chemical products are available and what purity levels are typical?

Emarc India supplies calcium bromide (liquid and powder), zinc bromide (liquid and powder), butyl‑phosphate defoamer, biocides, calcium carbonate and causticized potassium lignite, usually at industrial‑grade purity of 99 % or higher.

Which documents should a buyer request for the chemical products?

Buyers should request a current safety data sheet (SDS), a certificate of analysis (CoA) showing purity and moisture content, and evidence of REACH or TSCA compliance where applicable.

What are the common packaging formats for mineral products like mica and silica?

Mica sheets and blocks are typically packed in wooden crates, while mica powder, silica granules and quartz grits are shipped in 25 kg woven polypropylene bags or bulk silos, with moisture content kept below 2 %.

What are typical minimum order quantities (MOQ) and lead times?

MOQs range from 5 kg for chemical samples to one full steel coil (≈1 ton) for metal products; lead times are generally 30 - 45 days from order confirmation, depending on product availability.

Which Incoterms are commonly used for shipments from India?

Exporters from India often use FOB at major ports such as Kolkata or Mumbai, allowing buyers to arrange freight, insurance and onward transport.