About China Coal Industry And Mining Group - Industrial Machinery Supplier in China

China Coal Industry And Mining Group is a China-based supplier operating from the country's main industrial manufacturing belt, with an active catalogue of 253 products spanning eight primary categories: Drilling Machines & Tools, Agriculture, Packaging Machinery, Industrial Machinery, Tools & Instruments, CNC Machines & Spare Parts, Cars, Trucks, Buses, and Steel Bars. The visible portion of the catalogue is heavily weighted toward packaging machinery, listing more than two dozen sealing, filling, and cartoning units including impulse heat sealers, continuous band sealers, induction foil sealers, shrink tunnels, vacuum sealers, piston liquid fillers, and automatic carton erectors. The remaining items cross into mining support equipment (the Z-30W electric mining rock loader), construction diagnostics (a multi-function rebar corrosion detector), and the broader industrial machinery and CNC tooling categories that round out the supplier's offering.

The product mix reflects the kind of diversified industrial supply that is typical of large Chinese manufacturing groups, where packaging line equipment is sold alongside heavy mining machinery and steel products. Packaging machinery items fall under HS chapter 8422 (packing or wrapping machinery) and 8419 (machinery for treatment of materials by a change of temperature), while mining loaders and drilling tools sit in HS chapter 8430 (specialised machinery for mining, earthmoving and mineral processing) and CNC machine tools fall under HS chapter 8459 to 8466. Steel bars are classified in HS chapter 7213 to 7216 depending on grade and finish. Buyers reviewing this catalogue should expect to deal with a broad supplier whose strength is volume and category breadth rather than narrow specialisation in any single line.

Product Range and Specialties of China Coal Industry And Mining Group

The catalogue's packaging machinery segment alone covers the four main sealing technologies used in industrial packing lines: impulse heat sealing (hand-held, foot-pedal, and T-clamp variants such as the SF, PFS, and FKR series), continuous band sealing (FR-600A, FR-900S), induction foil sealing (manual DGYF-S500A, continuous LGYF-1500A-II and LGYF-2000-BX), and shrink wrapping (BSE6020T automatic shrink tunnel paired with QL6025 automatic side sealer). Filling equipment listed includes piston liquid fillers for thin liquids and ointments, vacuum perfume fillers, e-liquid bottle fillers (YG-1, YG-2), and a yogurt cup filling and sealing line, indicating coverage of cosmetic, pharmaceutical, food, and e-cigarette liquid packaging applications. Carton-closing equipment covers the Fxb6050, FXJ-AT5050, FXZ5050, and KXJ5050 series for top sealing, bottom sealing, auto-folding, and case erecting functions. Outside packaging, the catalogue lists a Z-30W electric mining rock loader designed for narrow vein underground coal and metal mines, typically rated for headings around 3 to 4 metres wide, and a multi-function rebar corrosion detector used in construction quality control to locate and quantify rebar corrosion potential. Buyers sourcing from this supplier should expect the packaging line equipment to be offered in the standard configurations common to Chinese OEM exports: stainless steel contact parts on food-grade units, 220V/380V dual-voltage motors, and throughput ratings typically expressed in bags, bottles, or cartons per minute depending on the machine. For mining and rebar-detection equipment, buyers should request the relevant GB or ISO standards compliance, the motor power in kW, the loader's bucket capacity in cubic metres, and for the corrosion detector, the measurement range and probe type.

Trade and Export Information - China Coal Industry And Mining Group

China is the world's largest exporter of packaging machinery, with the bulk of output shipped from manufacturing clusters in Guangdong, Zhejiang, Jiangsu, and Shanghai. Typical destination regions for Chinese packaging machinery include Southeast Asia, the Middle East, Africa, Eastern Europe, and Latin America, where buyers in food processing, cosmetics, pharmaceuticals, and e-commerce fulfilment sectors source complete or semi-automatic lines. Induction sealers and continuous band sealers exported from China are commonly required to carry CE marking for the European Union, and GCC conformity for Gulf destinations, while food-contact machines usually need stainless steel grades such as SUS 304 on all product-contact surfaces and documentation confirming compliance with food-safety regulations in the importing country (for example FDA in the United States, EU Regulation 1935/2004, or GCC food-contact standards). Mining loaders such as the Z-30W are exported under HS code 8430 and typically require the buyer to confirm MA (Mining Safety) approval for the Chinese domestic market or ATEX/IECEx certification where the equipment will be used in potentially explosive atmospheres in coal mines. Steel bars exported from China under HS chapters 7213 to 7216 generally require mill test certificates (MTC) to EN 10025 or equivalent ASTM A615/A706 standards, with buyers in construction and infrastructure projects typically specifying grade, diameter in mm, length in metres, and yield strength in MPa. Standard export packaging for this category is wooden crates or plywood cases with plastic film wrapping, and shipments are commonly arranged on FOB, CFR, or CIF Incoterms in 20 ft or 40 ft containers, with lead times of 15 to 45 days for packaging machinery ex-works depending on configuration and 30 to 60 days for heavier mining equipment.

Sourcing from China Coal Industry And Mining Group - Buyer Guidance

Buyers sourcing from this supplier should treat it as a broad-line industrial exporter and verify each product line on its own technical merits. For packaging machinery, request the throughput in units per minute, sealing temperature range in degrees Celsius, applicable film or bag material (PE, PP, laminated foil), power consumption in kW, and confirmation of CE or other destination-market conformity marking. For the mining rock loader, confirm bucket capacity in cubic metres, loading capacity in tonnes per hour, track gauge, motor power in kW, and any explosion-proof certification required for underground coal use. For the rebar corrosion detector, request the measurement principle (typically half-cell potential per ASTM C876), measurement range in mV, and probe configuration. Documentation that buyers should request on any order includes the commercial invoice, packing list, bill of lading, certificate of origin, and where applicable a mill test certificate for steel items or a CE declaration of conformity for machinery. Pre-shipment inspection by a third-party agency such as SGS, BV, or TUV is standard practice for first orders with new Chinese industrial machinery suppliers, and buyers are well advised to commission this before the balance payment is released. Sample sealing or a trial run of packaging equipment before shipment is also common, particularly for customised filling and induction sealing lines. Payment terms in this segment are typically 30% T/T deposit with 70% balance against copy of B/L, though letter of credit at sight is accepted for larger machinery orders.

What is the supplier's main product category?

Packaging machinery is the most heavily represented category in the visible catalogue, with more than two dozen impulse heat sealers, continuous band sealers, induction foil sealers, shrink tunnels, vacuum sealers, piston fillers, and carton sealing machines listed. The supplier also lists mining equipment, a rebar corrosion detector, and broader industrial machinery and CNC tooling.

Which HS code families apply to the packaging machinery listed?

Packing and wrapping machines generally fall under HS chapter 8422, while machinery involving heating or cooling of materials (such as shrink tunnels and induction sealers) is typically classified under HS chapter 8419. Carton erectors and sealers are also commonly classified within 8422.

What certifications should buyers request for the packaging equipment?

Buyers should request CE marking for the European Union, FDA or EU Regulation 1935/2004 food-contact compliance for food-grade units, and confirmation that product-contact parts are SUS 304 stainless steel. GCC conformity is relevant for Gulf destinations, and ISO 9001 quality system certification is commonly requested as a baseline.

What documents are typically required for the mining rock loader?

For the Z-30W electric mining rock loader, buyers should request the motor power rating in kW, bucket capacity in cubic metres, loading capacity in tonnes per hour, and any explosion-proof or MA mining safety approval. A third-party pre-shipment inspection report from SGS, BV, or TUV is standard for first orders.

What is the typical packaging and shipping method for these goods?

Packaging machinery is usually crated in plywood cases with foam protection and shipped in 20 ft or 40 ft containers. Lead times run 15 to 45 days ex-works for standard packaging machines and 30 to 60 days for mining equipment, commonly on FOB, CFR, or CIF Incoterms.

What is the minimum order quantity and lead time to confirm?

MOQ for industrial packaging machinery from Chinese OEM suppliers is typically one unit per model, with custom-configured filling or induction sealing lines sometimes requiring a 3 to 5 unit minimum. Lead times should be confirmed in writing at quotation stage, as they vary with configuration, motor specification, and destination.

Which regions typically import this type of Chinese packaging and mining equipment?

Southeast Asia, the Middle East, Africa, Eastern Europe, and Latin America are the main destination regions for Chinese packaging machinery exports. Mining loaders and steel bars from China are commonly shipped to African, Central Asian, and Southeast Asian mining and infrastructure projects.

How should a buyer verify quality before shipment?

Buyers should commission a third-party pre-shipment inspection covering dimensional checks, functional testing of sealing and filling equipment, electrical safety verification, and review of CE or destination-market conformity documents. For steel items, a mill test certificate (MTC) to EN 10025 or ASTM standards should be requested and verified against the order specification.