About Shandong Jintuo Metal Materials Co., Ltd - Steel Products Supplier in Viet Nam

Shandong Jintuo Metal Materials Co., Ltd is based in Viet Nam and lists 262 active metal products in its catalogue. The catalogue covers a broad spectrum of steel goods, including angle bars, wire rods, flat bars, I‑beams, plates, coils, strips, and rebar, each falling under the general HS‑code families for finished steel products such as 7208 (steel bars) and 7207 (steel plates). The supplier’s top categories mention roofing sheets, gypsum board, steel bars, steel coils, stainless steel coils, nickel alloy, steel plates, stainless steel plates and steel pipes, indicating a focus on both carbon and alloy steel forms. Product entries reference standard designations such as SAE 1012, SAE 1008, SAE 1018, ST37‑2, A36, Q345, Q235 and 201 stainless steel, which correspond to widely recognised grades in the global steel market.

The listed items include structural sections (H‑beam, I‑beam, angle bar), flat and round bars, various carbon steel plates (e.g., NM400, AH36, 4130, A283) and cold‑rolled sheets (ST12, ST15, ST16). Although the facts do not specify dimensions, typical industry sizes range from 6 mm to 200 mm thickness for plates and from 20 mm to 200 mm depth for beams, with lengths commonly 6 m or 12 m. The supplier’s catalogue therefore spans the core product families required by construction, fabrication and machinery sectors.

Product Range and Specialties of Shandong Jintuo Metal Materials Co., Ltd

The catalogue presents standard steel sections such as carbon steel angle bars, flat bars (ST37‑2, A36, Q345, Q235), I‑beams (including stainless and galvanized variants), H‑beams, and a variety of wire rods (SAE 1012, SAE 1008, SAE 1018). In the steel industry, these items are typically supplied to meet ASTM A36, EN 10025 or JIS G3101 specifications for carbon steel, while stainless steel angles and I‑beams often conform to ASTM A240 (AISI 304/316) or EN 10088. Common grades for rebar include B500B (Europe) or ASTM A615, and for steel plates the grades NM400, AH36 and 4130 correspond to specific tensile strength and chemical composition ranges. Buyers usually request material certifications that confirm compliance with these standards, as well as dimensional tolerances (e.g., ±0.5 mm for thickness, ±1 mm for width).

Trade and Export Information - Shandong Jintuo Metal Materials Co., Ltd

Vietnam is a major exporter of finished steel products to Southeast Asia, the Middle East and East Africa, with most shipments sent in 20‑ft or 40‑ft containers or as bulk cargo on roll‑on/roll‑off vessels. HS‑code 7208 (steel bars) and 7207 (steel plates) are the primary tariff lines, and many importing countries require a Certificate of Origin, an ISO 9001 quality management certificate and a Mill Test Report (MTR) for each shipment. Typical incoterms used by Vietnamese steel exporters are FOB Ho Chi Minh City or CIF destination port, with steel products packed in wooden pallets, steel drums or bulk bundles and protected with moisture‑resistant film. Regulatory checks often involve customs pre‑inspection for chemical composition and mechanical properties, especially for structural steel destined for building projects.

Sourcing from Shandong Jintuo Metal Materials Co., Ltd - Buyer Guidance

When sourcing from this supplier, request the latest Mill Test Report that details chemical analysis, tensile strength, yield point and elongation for each grade (e.g., SAE 1018 wire rod or Q345 flat bar). Verify that the product complies with the relevant ASTM, EN or JIS standard cited in the catalogue and ask for a Certificate of Origin to facilitate customs clearance. Confirm packaging details - such as pallet dimensions, bundling method and rust‑prevention coating - and clarify the minimum order quantity, which in the Vietnamese steel market often starts at one pallet (≈1 ton) for bars or a single 20‑ft container for plates.

What types of steel sections are listed in the catalogue?

The catalogue includes carbon steel angle bars, flat bars (ST37‑2, A36, Q345, Q235), H‑beams, I‑beams (including stainless and galvanized), wire rods (SAE 1012, 1008, 1018) and various steel plates such as NM400, AH36 and 4130.

Which standard grades are represented by the product names?

Product names reference common grades: SAE 1012/1008/1018 correspond to specific carbon content and tensile values, ST37‑2, A36, Q345 and Q235 follow EN 10025/ASTM A36, and 201 stainless steel aligns with ASTM A240 A201.

What HS‑code families apply to these steel products?

Typical HS‑code families are 7208 for steel bars and rods, 7207 for steel plates and sheets, and 7308 for other fabricated steel articles such as I‑beams and H‑beams.

Which certifications should a buyer request before purchasing?

Buyers should request an ISO 9001 quality‑management certificate, a Mill Test Report for each grade, and a Certificate of Origin. Additional certifications like CE marking may be required by the destination market.

What is a common minimum order quantity for these items?

In the Vietnamese steel export market, the MOQ often starts at one pallet (approximately 1 ton) for bars or a full 20‑ft container (≈20 tons) for plates and coils.

How are the steel products typically packaged for shipment?

Products are usually bundled on wooden pallets or steel drums, wrapped in moisture‑resistant film, and loaded into 20‑ft or 40‑ft containers for overseas delivery.

What lead time can buyers expect for standard steel orders?

Standard lead times range from 15 to 30 days after order confirmation, depending on product size, required certifications and container availability.

Which incoterms are most frequently used by this supplier?

The supplier commonly uses FOB Ho Chi Minh City for bulk shipments and CIF for containerized deliveries, allowing buyers to arrange onward transport from the destination port.