About Anhui Safe Electronics Co., Ltd. - Capacitors Supplier in China

Anhui Safe Electronics Co., Ltd. is located in China and currently lists 100 active products across its catalogue. The company’s catalogue covers capacitors, electronic cards, card readers, computer printers and related materials, as well as laminates, plastic items and industrial tapes/films. Products include AC single‑phase motor capacitors, CBB series motor run capacitors, welding inverter DC filter capacitors and DC‑link filter capacitors, each classified under HS chapter 85 (e.g., 8532.30, 8532.25, 8532.29). The supplier also offers PET and PVC cards for printers, RFID proximity cards, and various card trays, which fall under HS chapter 39 (e.g., 3920.99 for metallized PET film). In addition, metallised film materials such as MPET and BOPP film for capacitor use are listed, completing a breadth of electronic and plastic components.

The capacitor line features plastic‑case AC motor capacitors, film‑type CBB capacitors with polypropylene dielectric, and aluminum‑electrolytic DC‑link filters, reflecting common IEC‑60384 classifications. Card products include ink‑jet printable PVC cards in thicknesses of 0.45 mm and 0.6 mm, RFID cards at 13.56 MHz (MIFARE‑compatible) and 125 kHz, and magnetic‑stripe chip cards, all typical of ISO/IEC 7810 ID‑1 specifications. The listed laminates and industrial tapes/films are described as metallised polyester (PET) or BOPP films, materials frequently used for dielectric layers in high‑frequency capacitors. Although the facts do not mention certifications, the product descriptions align with standard industry material codes and HS classifications. The catalogue’s mix of electronic components and printable media positions the supplier as a diversified source for OEM and contract manufacturers.

Product Range and Specialties of Anhui Safe Electronics Co., Ltd.

The catalogue lists a range of capacitor types: AC motor capacitors with plastic housing (HS 8532.30), welding inverter DC filter capacitors (HS 8532.25), CBB motor run capacitors such as CBB61, CBB60 and CBB65 (HS 8532.25/29), and DC‑link filter capacitors (HS 8532.25). In the capacitor market, typical grades are defined by IEC 60384‑14 for film caps and IEC 60384‑1 for electrolytic caps, with voltage ratings from 250 V to 450 V and capacitance values from 0.5 µF to 100 µF. Materials commonly used include metallised polypropylene film, aluminum electrolytic foil and copper terminals, matching the material descriptions in the facts. The supplier also provides MPET and BOPP metallised films (HS 3920.99), which are standard dielectric substrates for high‑frequency and high‑voltage capacitor manufacturing. Card and printer related items comprise ink‑jet printable PVC cards of 0.45 mm and 0.6 mm thickness, transparent PVC cards, PET cards for laser printing, and RFID proximity cards at 13.56 MHz and 125 kHz. Industry standards for such cards include ISO/IEC 7810 (ID‑1 size), ISO/IEC 14443 for contactless smart cards and ISO/IEC 15693 for vicinity cards. Card trays for Epson and Canon printers are also listed, typically shipped in bulk cartons for easy integration into print‑shop workflows.

Trade and Export Information - Anhui Safe Electronics Co., Ltd.

China is a major exporter of electronic components such as capacitors and printed media, with key destination markets in Southeast Asia, Europe and North America. Capacitor products fall under HS chapter 85 (e.g., 8532.25, 8532.30, 8532.29) and are subject to standard export documentation, including commercial invoices, packing lists and, where required, CE or UL test reports for compliance with IEC standards. Metallised PET and BOPP films are classified under HS 3920.99 and often require material safety data sheets (MSDS) and REACH conformity for shipments to the EU. Printed PVC cards and RFID cards belong to HS chapter 39 and are commonly shipped in cartons or shrink‑wrapped pallets. Buyers in the printing and security sectors typically request RoHS declarations, ISO/IEC 7810 compliance certificates, and functional test reports for RFID performance. Common Incoterms for these goods are FOB Shanghai or CIF destination ports, with container loads ranging from 20 ft to 40 ft depending on volume. Exporters from China routinely follow the China Inspection and Quarantine (CIQ) procedures and may need to provide conformity assessments for electronic safety standards when supplying to regulated markets.

Sourcing from Anhui Safe Electronics Co., Ltd. - Buyer Guidance

When sourcing capacitors from this supplier, request the full datasheet that lists capacitance, voltage rating, tolerance, dissipation factor and operating temperature range. Verify that the product complies with IEC 60384‑14 (film caps) or IEC 60384‑1 (electrolytic caps) and ask for RoHS and CE test reports if the destination market requires them. For MPET and BOPP films, obtain material specifications, thickness (typically 12‑30 µm), dielectric strength and an MSDS to confirm suitability for capacitor manufacturing. For PVC and PET cards, ask for ISO/IEC 7810 dimensions, thickness verification, surface finish details and, for RFID variants, the supported frequency and protocol (e.g., ISO/IEC 14443 Type A/B). Request a functional sample to test print quality and RFID read range before placing a larger order. Typical minimum order quantities for printed cards range from 5,000 to 10,000 pieces, with lead times of 30‑45 days after artwork approval. Packaging is usually in anti‑static bags or bulk cartons, and buyers should confirm container loading plans (20 ft or 40 ft) to align with logistics requirements.

What capacitor HS codes does Anhui Safe Electronics list?

The supplier lists capacitors under HS 8532.30 for plastic‑case AC motor capacitors, HS 8532.25 for welding inverter DC filter capacitors, CBB series motor run capacitors and DC‑link filter capacitors, and HS 8532.29 for power‑saver and other specialized caps.

Which materials are used in the listed film capacitors?

Materials include metallised polypropylene film, aluminium‑electrolytic film, BOPP film with aluminium metallisation, and metallised polyester (MPET) film with aluminium or zinc coating, as described in the catalogue.

What standards should buyers check for the capacitor products?

Buyers should verify compliance with IEC 60384‑14 for film capacitors and IEC 60384‑1 for electrolytic caps, and request RoHS and CE test reports where applicable.

What are the typical specifications for the PVC printer cards?

The PVC cards are offered in thicknesses of 0.45 mm and 0.6 mm, conform to ISO/IEC 7810 ID‑1 size, and are designed for ink‑jet printing; surface smoothness and colour consistency are key quality parameters.

Which certifications are commonly required for the RFID cards?

Typical certifications include ISO/IEC 14443 for 13.56 MHz proximity cards and ISO/IEC 15693 for 125 kHz cards, as well as RoHS compliance and a functional read‑range test report.

What packaging is used for bulk shipments of capacitors and films?

Capacitors are usually packed in anti‑static bags within cardboard cartons, while metallised films are shipped on pallets wrapped in shrink film, both suitable for 20 ft or 40 ft container loads.

What is the usual lead time for a first sample order?

Suppliers in China typically provide a printed card or capacitor sample within 7‑14 days after artwork or specification approval, followed by full production lead times of 30‑45 days.

How can buyers verify the HS code classification of a product?

Buyers should request the commercial invoice and packing list that list the HS code, and cross‑check it against the HS chapter 85 classification for capacitors or chapter 39 for plastic cards and films.