About Necero Optical Fiber And Cable Co., Ltd. - Optical Fiber Cables Supplier in China

Necero Optical Fiber And Cable Co., Ltd. is based in China and currently lists five distinct optical fiber cable products. The catalogue includes GYXTW, GYXY, JET, GYTS and GYTA, all classified under the single top category of Optical Fiber Cables. Each entry is recorded as an optic fiber or fiber optical cable, matching the HS 8544 family used for fiber optic cables worldwide. The supplier is listed as an imported tier with a harbor trust rating, indicating that it is engaged in cross‑border trade.

The five products are identified only by their model codes, without additional technical descriptors in the public data. In the global market, such model codes usually correspond to variants in core diameter, jacket material, or application focus such as indoor plant, aerial or submarine deployment. Buyers can expect the underlying cable constructions to follow common industry standards such as ITU‑T G.652 for single‑mode and G.655 for bend‑insensitive designs, though specific compliance must be confirmed with the supplier.

Product Range and Specialties of Necero Optical Fiber And Cable Co., Ltd.

The supplier’s catalogue contains the model codes GYXTW, GYXY, JET, GYTS and GYTA, each representing a type of fiber optic cable. In the optical fiber industry, cables are typically offered in single‑mode (9 µm core) and multimode (50 µm or 62.5 µm core) grades, with outer jackets of PVC, LSZH or water‑blocking compounds. Standard performance metrics include attenuation of 0.35 dB/km for single‑mode and 3 dB/km for multimode at 1310 nm, tensile strength of 350 MPa, and a minimum bend radius of 30 mm. Reels are commonly supplied in lengths of 500 m or 1000 m, fitting within 20‑ft or 40‑ft containers for ocean freight.

Trade and Export Information - Necero Optical Fiber And Cable Co., Ltd.

China is one of the world’s largest exporters of fiber optic cable, and shipments are normally classified under HS chapter 85, specifically HS 8544.49 for other optical fiber cables. Major import regions include North America, the European Union, and Southeast Asia, where telecom operators, data‑center builders and industrial automation firms source large volumes. Typical buyer requirements involve ISO 9001 quality management certification, IEC 61753 test reports for mechanical performance, and RoHS compliance for restricted substances. Export logistics frequently use 20‑ft containers for 500 m reels or 40‑ft containers for 1000 m reels, with Incoterms such as FOB Shanghai or CIF destination port.

Sourcing from Necero Optical Fiber And Cable Co., Ltd. - Buyer Guidance

Potential buyers should request a detailed data sheet for each model code, specifying core and cladding diameters, jacket material, attenuation values, tensile strength and bend radius. Independent test reports such as OTDR loss measurements, tensile tests per IEC 61753 and fire‑retardancy test results are standard documents to verify compliance. Sampling is usually done with a 10 m or 20 m piece on a small reel, and typical minimum order quantities start at one full reel (500 m). Lead times for Chinese manufacturers range from four to six weeks after order confirmation, subject to capacity and customs clearance.

What types of optical fiber cables does Necero list?

The catalogue shows five model codes - GYXTW, GYXY, JET, GYTS and GYTA - each identified as an optic fiber or fiber optical cable. The exact technical specifications are not disclosed in the public listing and should be obtained from the supplier.

How can I obtain technical specifications for a specific model?

Request a product data sheet that includes core diameter, cladding size, jacket material, attenuation at 1310 nm and 1550 nm, tensile strength and bend radius. The supplier can also provide IEC‑61753 test reports if required.

Which certifications are commonly required for fiber optic cables from China?

Buyers typically ask for ISO 9001 quality‑management certification, IEC 61753 mechanical test reports and RoHS compliance documentation. Confirmation of these certificates should be requested before placing an order.

What is the typical packaging and shipping format for these cables?

Optical fiber cables are usually wound on 500 m or 1000 m reels and packed in wooden crates or bulk pallets. A full 500 m reel fits in a 20‑ft container, while a 1000 m reel can be loaded into a 40‑ft container.

What are the common HS codes for these products?

Fiber optic cables are generally classified under HS chapter 85, most often HS 8544.49 for other optical fiber cables. The exact sub‑heading depends on the cable construction and intended use.

What are typical lead times and minimum order quantities?

Lead times from Chinese manufacturers are usually four to six weeks after order confirmation. Minimum order quantities often start at one full reel, equivalent to 500 m of cable.

How should I arrange a sample before a full order?

Request a 10 m to 20 m sample on a small reel, along with the relevant test reports. Samples are typically shipped by air freight or express courier to allow rapid evaluation.