About ALGHA GLOBAL REFRACTORIES PRIVATE LIMITED - Refractory Bricks Supplier in India

ALGHA GLOBAL REFRACTORIES PRIVATE LIMITED is based in Gurgaon, Haryana, India and currently lists six active products in its catalogue. The supplier’s portfolio includes refractory fire bricks, various refractory castables, a high‑temperature mortar marketed as THERMOTEX, ceramic fibre blankets and boards, and boiler bed material. Each product entry is tied to a specific HS‑code family, such as 6902.20 for fire bricks and 3816.00 for castables, reflecting standard customs classifications for refractory goods. The catalogue also notes material specifics, for example fire bricks made from fireclay or high‑alumina (Al₂O₃ content 30‑80 %).

Product Range and Specialties of ALGHA GLOBAL REFRACTORIES PRIVATE LIMITED

The fire brick line covers both fireclay bricks and high‑alumina bricks, which in international trade are graded by alumina content and compressive strength, typically ranging from 30 % to 80 % Al₂O₃ and 30‑50 MPa respectively. Refractory castables listed under HS 3816.00 are supplied as mortars, castables and firecements; industry standards such as ASTM C131 or EN 1561 define typical binder ratios, aggregate gradation and maximum service temperatures up to 1700 °C. The ceramic fibre products, offered as blankets and boards in all sizes, are commonly classified by density (e.g., 0.12‑0.30 g/​cm³) and maximum continuous service temperature (up to 1260 °C). Boiler bed material under HS 2508.60 is usually a magnesite‑based aggregate designed for high‑temperature stability in boiler furnaces.

Trade and Export Information - ALGHA GLOBAL REFRACTORIES PRIVATE LIMITED

India is a major exporter of refractory products, supplying steel mills, cement plants and petrochemical complexes in the Middle East, Southeast Asia and Europe. HS 6902 covers ceramic bricks and refractory fire bricks, while HS 3816 applies to refractory castables and fire‑cements; both codes are subject to routine customs inspection and may require a Certificate of Origin and material test reports. Typical buyer requirements include compliance with ISO 9001 quality management, and for high‑temperature applications, verification against ASTM C618 (pozzolanic cement) or EN 10210 (high‑alumina bricks). Shipments are usually packed on wooden pallets or in bulk bags, loaded in 20‑ft or 40‑ft containers, and traded under FOB or CIF Incoterms depending on the destination port.

Sourcing from ALGHA GLOBAL REFRACTORIES PRIVATE LIMITED - Buyer Guidance

When sourcing fire bricks, request the alumina percentage, compressive strength values and a recent mill test report confirming conformity to ASTM C618 or EN 10210. For castables, ask for the binder-to‑aggregate ratio, maximum service temperature, and a batch‑specific certificate of conformity to ASTM C131. Ceramic fibre blankets should be accompanied by density data, thermal conductivity figures and a certification that the product meets ISO 12086 for fibre content. Boiler bed material buyers typically verify the magnesite purity, bulk density and the presence of any volatile additives through a material safety data sheet (MSDS). In all cases, obtain a sample batch for laboratory testing before confirming large‑scale orders, and verify that the supplier can provide the required export documentation such as a Certificate of Origin and test certificates.

What HS‑code applies to the refractory fire bricks offered by ALGHA GLOBAL REFRACTORIES?

The fire bricks are classified under HS 6902.20, which covers refractory bricks of fireclay or high‑alumina composition.

Which material specifications should a buyer check for the high‑alumina fire bricks?

Buyers should confirm the Al₂O₃ content (30‑80 %), the compressive strength (typically 30‑50 MPa) and that the product meets ASTM C618 or EN 10210 standards.

What documentation is normally required for the refractory castables (HS 3816.00)?

A batch test report showing binder composition, maximum service temperature (up to 1700 °C), and compliance with ASTM C131 or EN 1561, together with a Certificate of Origin, is standard.

How are ceramic fibre blankets and boards usually supplied?

They are supplied in rolls or panels of various sizes, with density values (0.12‑0.30 g/​cm³) and a thermal rating up to 1260 °C, and are typically certified to ISO 12086.

What are the typical export markets for Indian refractory products?

Major importers include steel producers in the Middle East, cement manufacturers in Southeast Asia, and petrochemical facilities in Europe.

What packaging and shipping format is common for boiler bed material (HS 2508.60)?

Boiler bed material is usually packed in bulk bags or wooden crates, loaded into 20‑ft or 40‑ft containers, and shipped under FOB or CIF terms.

Which certifications should a buyer request to verify product quality?

Buyers should request ISO 9001 quality management certification, relevant ASTM or EN test reports, and a material safety data sheet (MSDS) for each product type.

Is a sample required before a full order of refractory castables?

Yes, it is standard practice to obtain a representative sample for laboratory testing of properties such as setting time, strength development and thermal resistance before confirming bulk quantities.