About M PetroEnergy - Cable Assemblies Supplier in Pakistan

Pakistan, Sindh region hosts M PetroEnergy, which currently lists ten active product entries in its catalogue. The listed items fall under the broader cable assemblies family and are recorded with HS codes ranging from 8544.42 to 9841. Each entry specifies the conductor material, jacket type and shielding, covering variants such as bare copper, oxygen‑free copper, tinned copper and different PVC or polypropylene insulation systems. The catalogue groups the products into three functional families: Audio & Control Cables, Communication & Instrumentation Cables, and a Battery Management System (BMS) Cable. The supplier’s profile also references related product families such as cable glands, reels and wire harnesses, although those are not detailed in the HS‑coded list.

The Audio & Control Cable entries use HS code 8544.49 for most shielded versions and 8544.42 for a stranded bare copper variant, indicating they are classified under “other electric conductors, for a voltage not exceeding 1 kV”. The Communication & Instrumentation entries carry HS codes 8760, 8761 and 8762, which correspond to “telephone sets, other apparatus for transmission or reception of voice, images or other data”. The single BMS Cable entry is recorded under HS code 9841, a less common classification for “parts of telephone sets, other”. All products are described with copper conductors, PVC or polypropylene jackets and various foil or braid shields, reflecting typical construction for industrial and utility cabling.

Product Range and Specialties of M PetroEnergy

The catalogue shows five variants of Audio & Control Cables, each built with copper conductors (bare, oxygen‑free or tinned) and PVC jackets, shielded by aluminum foil, Mylar or braid. In the cable industry, such products are commonly offered in IEC 60228 Class 1 or Class 2 conductor grades, with voltage ratings up to 600 V and fire‑performance standards such as IEC 60332‑1. Typical specifications include a copper cross‑section of 0.5 mm² to 4 mm², PVC insulation rated to 70 °C, and EMI shielding effectiveness measured to IEC 61034. The Communication & Instrumentation family includes three HS‑coded variants that align with telecom‑grade cables, often supplied as CAT5e, CAT6 or coaxial types, meeting standards like IEC 60785 for insulation and IEC 60815 for fire resistance. The BMS Cable (HS 9841) is a specialty low‑resistance cable for battery management systems, usually specified with copper conductors of 1 mm² to 2.5 mm², aluminum or polyester shields, and PVC jackets rated for 105 °C, complying with UL 758 and IEC 60384‑14 for automotive and renewable‑energy applications.

Trade and Export Information - M PetroEnergy

Pakistan’s cable manufacturing sector exports heavily to the Middle East, Africa and South‑East Asia, where power‑generation projects, telecom infrastructure and industrial automation drive demand for the types listed by M PetroEnergy. HS chapter 85 (electrical machinery) and chapter 87 (optical and telecommunications equipment) are the primary tariff classifications for these goods, and importers often require conformity to IEC standards, RoHS compliance and, where applicable, CE marking for European markets. Shipping is typically arranged in 20‑ft or 40‑ft containers, with reels or drums packed on wooden pallets, and Incoterms such as FOB Karachi or CIF Dubai are common. Pakistani exporters of cable assemblies frequently hold ISO 9001 quality‑management certification and may need to provide test reports for fire‑performance (IEC 60332) and shielding effectiveness (IEC 61034) to satisfy buyer audits. The country’s proximity to the Arabian Sea facilitates sea‑freight routes to the Gulf Cooperation Council (GCC) states, while over‑land corridors serve the Central Asian market.

Sourcing from M PetroEnergy - Buyer Guidance

Buyers should request detailed product data sheets that list conductor cross‑section, voltage rating, temperature class, shielding type and compliance with IEC 60228, IEC 60332 and IEC 61034. Test reports for fire‑performance, dielectric strength and EMI shielding are standard documentation for industrial cable purchases and should be verified before contract finalisation. Since the supplier does not list specific certifications, buyers are advised to confirm RoHS, CE or UL certification status and, where required, request an ISO 9001 audit report. Typical minimum order quantities for reel‑packed cables range from 500 m to 1 000 m per specification, with lead times of four to eight weeks after order confirmation, depending on the material grade and shielding complexity. Samples of each variant - especially the oxygen‑free and tinned conductors - are useful for in‑house testing of resistance, flexibility and shielding performance before bulk procurement.

What HS codes are used for the Audio & Control Cables listed by M PetroEnergy?

The Audio & Control Cables are classified under HS code 8544.49 for most shielded versions and 8544.42 for the stranded bare copper variant, both falling within the "other electric conductors" category.

Which material specifications are common for the Communication & Instrumentation cables?

They are described with stranded bare copper or tinned copper conductors, PVC or polypropylene insulation, and an aluminum foil shield, matching typical telecom cable constructions that meet IEC 60785 and IEC 60815 standards.

What typical certifications should a buyer request for these cable products?

Buyers normally request RoHS compliance, CE marking for EU shipments, and IEC‑based test reports such as IEC 60332 fire‑performance and IEC 61034 shielding effectiveness. UL or ISO 9001 certificates are also common in international trade.

What are the usual minimum order quantities and packaging formats?

Cables are commonly supplied on reels or drums, with typical MOQs ranging from 500 meters to 1 000 meters per specification. Reels are palletised for container loading, fitting standard 20‑ft or 40‑ft containers.

What lead time can a buyer expect for these cable types?

Lead times generally range from four to eight weeks after order confirmation, depending on the conductor grade, shielding type and any required testing documentation.

How should a buyer verify the shielding performance of the Audio & Control Cables?

Request an IEC 61034 shielding effectiveness test report, which quantifies the cable’s ability to attenuate electromagnetic interference across the relevant frequency range.

Are there any specific voltage or temperature ratings buyers should check?

The listed cables are typically rated up to 600 V and have PVC insulation rated for 70 °C (or 105 °C for the BMS Cable). Confirm the rating matches the intended application’s safety standards.

What Incoterms are commonly used for exporting these cables from Pakistan?

Exporters often use FOB Karachi for sea freight or CIF Dubai for Gulf destinations, aligning with standard trade practices for bulk cable shipments.