About Totek International Corporation Ltd. - Wires & Cables Supplier in China

Totek International Corporation Ltd. is based in China and currently lists twelve active products across the Wires & Cables, Cable Assemblies and Computer Cables categories. The catalogue includes items such as Custom Wire Harness, D‑Sub Connector Cable, Panel Mount USB Cable, Audio Video Cable, LAN Cable, High Speed Cable and several specialized cable assemblies. Two products carry explicit HS classifications: the DS18B20 Cable Assembly is recorded under HS code 9025.19 and uses a silicon sensor die with copper wire terminations and a PVC or PTFE jacket, while the TE Connector Cable Assembly falls under HS code 8544.42 and features a polyamide connector housing, copper‑alloy contacts and PVC or PE insulation. The remaining items are listed without HS codes but belong to the broader HS chapters for insulated wires and cable assemblies. All entries reflect the supplier’s focus on electronic interconnects and signal transmission solutions.

The product set spans both generic and application‑specific cables, covering video, data, power and sensor interfaces. Examples include a DisplayPort to VGA/DVI/HDMI adaptor cable, an angled USB cable, a Qsfp cable assembly for high‑speed optical modules, and an XLR cable assembly for audio equipment. Materials cited in the catalogue range from copper conductors and various polymer jackets to polyamide housings, consistent with industry standards for durability and electrical performance. No additional certifications are documented for the supplier, so buyers typically verify compliance with RoHS, CE or UL where required. The catalogue’s breadth suggests suitability for OEMs, system integrators and contract manufacturers seeking custom or off‑the‑shelf cable solutions.

Product Range and Specialties of Totek International Corporation Ltd.

The catalogue offers a mix of custom‑built harnesses, connector cables and ready‑made assemblies. Products such as the Custom Wire Harness and D‑Sub Connector Cable are typical of industrial wiring where gauge, insulation type and shielding are selected to meet specific voltage and EMI requirements. In the broader market, cable grades are often defined by copper purity (typically 99.9 % OFHC), jacket material (PVC, LSZH, PTFE) and performance standards such as IEC 60228 for conductor class or IEC 60320 for power cords. The DS18B20 Cable Assembly, classified under HS 9025.19, is a sensor cable commonly produced to meet IEC 60730 for temperature sensor accuracy, while the TE Connector Cable Assembly (HS 8544.42) aligns with IEC 60512 for connector durability. Buyers frequently request specifications such as conductor cross‑section (e.g., 0.5 mm² to 2.5 mm²), voltage rating (300 V to 600 V), and shielding type (foil, braid or both).

Trade and Export Information - Totek International Corporation Ltd.

China remains one of the world’s largest exporters of electronic cables, with major import markets in North America, Europe and Southeast Asia. HS chapter 85 (electrical machinery and equipment) and chapter 90 (optical, photographic and medical instruments) cover most of the listed items, and customs authorities often require test reports for flame retardancy (UL 94 V‑0) and low smoke zero halogen (LSZH) compliance. Buyers of high‑speed data cables such as LAN or Qsfp assemblies typically request IEC 60794 certification and verification of insertion loss and return loss values per ISO 11801. For video and audio cables, standards like SMPTE 292M for HDMI or IEC 60268 for XLR audio are common references. Export logistics from Chinese ports usually involve container loads of 20 ft or 40 ft, with packaging in sealed cartons or wooden crates, and Incoterms such as FOB Shanghai or CIF Los Angeles are standard practice.

Regulatory oversight in China includes the China Compulsory Certification (CCC) for certain electronic components, but many cable products are exempt unless they are part of safety‑critical systems. Consequently, international buyers often request third‑party test certificates (e.g., Intertek, SGS) to satisfy local market regulations in the EU (CE marking) or the United States (UL listing).

Sourcing from Totek International Corporation Ltd. - Buyer Guidance

When sourcing from Totek International Corporation Ltd., buyers should request detailed datasheets that list conductor material, gauge, jacket type, temperature rating and any shielding specifications. For the DS18B20 and TE Connector assemblies, request the material safety data sheet (MSDS), the HS code declaration and any applicable test reports such as IEC 60730 or IEC 60512 compliance. Because no certifications are listed, it is prudent to ask for RoHS conformity statements and, where required, CE or UL test certificates before placing a purchase order. Verify the packaging details - typically inner poly‑bagged units placed in corrugated cartons - and confirm the dimensions and weight per carton to calculate freight costs accurately. Lead times for custom harnesses can range from 4 weeks to 12 weeks depending on design complexity, while standard cables are often stocked and can ship within 1 - 2 weeks after order confirmation.

Sample requests should specify the exact connector type, cable length and jacket material to ensure the prototype matches the intended application. MOQ thresholds for custom assemblies are usually expressed in bundles of 100 units or higher, whereas off‑the‑shelf cables may be ordered in single pieces for evaluation. Buyers are advised to verify that the supplier can provide test reports for parameters such as insulation resistance, dielectric strength and attenuation before finalizing large orders.

What types of cable products does Totek International Corporation Ltd. list in its catalogue?

The catalogue includes Custom Wire Harnesses, D‑Sub Connector Cables, Panel Mount USB Cables, Audio Video Cables, LAN Cables, High Speed Cables, DisplayPort to VGA/DVI/HDMI adaptors, angled USB cables, Qsfp cable assemblies, XLR cable assemblies and two assemblies with HS codes - DS18B20 (9025.19) and TE Connector (8544.42).

Which HS codes are associated with the supplier’s products?

Two products have explicit HS codes: the DS18B20 Cable Assembly is recorded under HS 9025.19 and the TE Connector Cable Assembly under HS 8544.42. The remaining items fall under broader HS chapters for insulated wires and cable assemblies (generally chapter 85).

Are there any certifications listed for Totek International’s cable assemblies?

No certifications are listed in the supplied facts. Buyers typically request RoHS compliance, CE marking or UL listings for electronic cables, and may also ask for IEC‑based test reports relevant to the specific product.

What material specifications are mentioned for the cable assemblies?

The DS18B20 Assembly uses a silicon sensor die with copper wire terminations and a PVC or PTFE jacket. The TE Connector Assembly uses a polyamide connector housing, copper‑alloy contacts and a PVC or PE cable insulator. Other products are described only by type, without detailed material data.

What are common quality standards for the types of cables listed?

Industry standards include IEC 60228 for copper conductor class, IEC 60320 for power cords, IEC 60794 for fiber‑optic cable assemblies, IEC 60730 for temperature sensor cables, and IEC 60512 for connector durability. Flame‑retardancy (UL 94 V‑0) and low‑smoke zero‑halogen (LSZH) are also frequently required.

What typical lead times and minimum order quantities should a buyer expect?

Custom harnesses and specialized assemblies often require 4 to 12 weeks lead time, while standard cables can be shipped within 1 - 2 weeks. Minimum order quantities are usually expressed in bundles of 100 units for custom work; off‑the‑shelf cables may be ordered in single units for sampling.

How are the cable products usually packaged for export?

Products are commonly packed in sealed poly‑bags inside corrugated cartons, with carton dimensions and weight specified for container loading. Larger orders may be palletized on wooden pallets for 20 ft or 40 ft container shipments.

Which markets typically import the categories offered by Totek International?

Major import markets for Chinese electronic cables include the United States, European Union members, Japan and South Korea. Industries such as consumer electronics, automotive, telecommunications and industrial automation are the primary buyers of these cable types.