About Ivory Dutch Recycling PE scrap supplier - PE scrap Supplier in Sweden

Ivory Dutch Recycling PE scrap supplier is based in Stockholm, Sweden and currently lists ten active product entries. The supplier’s catalogue groups items under broader categories such as Ship and Marine Scrap, Printer Scrap, Plastic Items, Mining Machinery, Recycled Plastic, Metal Scraps, Electronic Scrap and Paper Products, reflecting a diversified waste‑material portfolio. Specific product entries include LDPE film scrap (HS 3915.10), PET bottle scrap (HS 3915.90), HDPE milk‑bottle scrap (HS 3915.10), HDPE drum regrind (HS 3915.10), PMMA acrylic off‑cuts (HS 3915.90), PU foam and memory‑foam pieces (HS 3915.90), waste paper OCC (HS 4707.90), EPS/PS block scrap (HS 3915.10), electric motor scrap (HS 7404.00) and flexible PVC medical tubing (HS 3915.30).

The listing emphasizes material type, common form (bales, rolls, drums or blocks) and the associated HS‑code families rather than processing details. All ten entries are presented as ready‑for‑export scrap streams, with the supplier positioned as an imported tier “harbor” trader within the global recycling supply chain.

Product Range and Specialties of Ivory Dutch Recycling PE scrap supplier

The catalogue covers a spectrum of thermoplastic and polymeric wastes. LDPE and HDPE scraps are typically supplied in bale or roll form, with melt‑flow indices ranging from 0.5 to 5 g/10 min and film thicknesses between 30 µm and 250 µm for re‑processing. PET bottle scrap is generally classified as recycled PET‑1, cleaned to meet EU food‑grade standards and often measured by intrinsic viscosity (IV) around 0.85‑0.95 dL/g. PMMA acrylic off‑cuts usually retain >99 % optical clarity and are tested for residual monomer content below 0.1 %. PU foam grades for memory‑foam applications are measured by density (30‑45 kg/m³) and compression set. Waste paper OCC is graded by fiber length (3‑5 mm) and ash content (<0.5 %). EPS and PS block scrap are supplied at bulk densities of 20‑30 kg/m³, suitable for re‑granulation. Electric motor scrap is a mixed ferrous/non‑ferrous stream, with copper recovery rates of 20‑30 % by weight. PVC medical tubing is supplied in medical‑grade PVC, compliant with ISO 11607 for barrier performance.

Trade and Export Information - Ivory Dutch Recycling PE scrap supplier

Sweden is a major exporter of post‑consumer plastic and paper scrap to the EU, Turkey, China and India, with HS 3915 series codes covering most polymeric waste streams. Buyers of LDPE, HDPE and PET scrap commonly request REACH‑compliant material safety data sheets and ISO 14001 environmental management certification from suppliers. For electronic motor scrap, RoHS and R2 recycling standards are frequently required. Typical export packaging includes 1‑ton bales for polymers, 20‑ft containers for bulk EPS/PS blocks, and wooden crates for PVC medical tubing, all sealed to meet ISPM 15 phytosanitary rules where applicable. Common Incoterms are FOB Stockholm or CIF Shanghai, with customs declarations referencing the exact HS codes (3915.10, 3915.90, 3915.30, 4707.90, 7404.00). Swedish export regulations mandate waste‑shipment permits and, for medical‑grade PVC, compliance with EU Medical Device Directive documentation.

Sourcing from Ivory Dutch Recycling PE scrap supplier - Buyer Guidance

When sourcing from Ivory Dutch Recycling, buyers should request recent material analysis reports - melt‑flow index for LDPE/HDPE, intrinsic viscosity for PET, density for EPS/PS, and copper content for motor scrap. Confirm that the supplier can provide ISO 14001 or equivalent environmental certification and REACH compliance statements for polymeric streams. Verify the HS‑code classification on the commercial invoice matches the product description to avoid customs delays, and ask for a sample batch to test for contaminants such as PVC or metals before committing to a full order.

Additionally, buyers should clarify packaging dimensions (e.g., bale size 1 m × 0.8 m × 0.6 m) and loading plans for container shipments, and ensure that any required testing - such as FTIR for polymer identification or moisture content for paper - is documented in a third‑party lab report. Requesting a copy of the waste‑shipment permit issued by Swedish authorities can further validate the legality of the export.

What types of plastic scrap are listed in the catalogue?

The catalogue includes LDPE film scrap, PET bottle scrap, HDPE milk‑bottle and drum scrap, PMMA acrylic off‑cuts, PU foam pieces, EPS/PS block scrap and flexible PVC medical tubing, each identified with its specific HS code.

Which HS codes apply to the plastic scrap items?

LDPE, HDPE drum, EPS/PS blocks and PVC medical tubing fall under HS 3915.10, PET bottle and PMMA acrylic under HS 3915.90, and PVC medical tubing specifically under HS 3915.30.

What certifications are typically required for these scrap materials?

Buyers usually ask for ISO 14001 environmental management, REACH compliance for polymers, and R2 or RoHS certification for electronic motor scrap. Medical‑grade PVC may also need CE marking documentation.

How is the scrap typically packaged for export?

Polymer bales are often compressed to 1‑ton units, PET and LDPE may be shipped on rolls, EPS/PS blocks are loaded in bulk within 20‑ft containers, and electric motor scrap is crated in wooden pallets.

What documentation should a buyer request before ordering?

Material test reports (MFI, IV, density), safety data sheets, environmental certificates, waste‑shipment permits from Swedish authorities, and a commercial invoice with the correct HS code.

What are the common minimum order quantities for these products?

Most polymer bales have a minimum of one metric ton; PET bottle scrap and EPS/PS blocks are often sold in 1‑ton increments, while electric motor scrap may require a minimum of 500 kg per order.

What lead times are typical for shipments from Sweden?

Standard lead times range from 2 weeks for ready‑baled polymer scrap to 4‑6 weeks for larger motor or medical‑grade PVC shipments, depending on packaging and customs clearance.

Which global regions most frequently import Swedish plastic scrap?

The primary import markets are the European Union, Turkey, China and India, where the scrap is used for re‑grinding, extrusion and manufacturing of new polymer products.