About Chandi Associates - Medical Face Masks Supplier in India

Chandi Associates operates from India and lists eight active products across medical protective equipment and hygiene solutions. The catalogue includes a Spray Sanitizer Gun, a Sanitizer Spray Machine, a Covid‑19 Testing Kit (HS 3822.00) that uses lateral‑flow nitrocellulose membranes, a single‑piece Face Mask (HS 6307.90) made from 25 gsm virgin polypropylene spun‑bond non‑woven fabric, a pocket‑size self‑sanitizer, bulk sanitizers in 500 ml, 1 L and 5 L containers, a sodium‑based disinfectant, and a disposable bag for waste handling.

The listed top categories cover Medical Face Masks, Hand Sanitizer Dispenser, Hand Sanitizer, Disposable Gowns, COVID‑19 Detection Kit, Thermal Scanner & Camera, Disposable Shoe Covers and Medical Gloves. While the catalogue does not provide HS codes for all items, the two coded products fall under the diagnostic reagents chapter (3822) and the apparel accessories chapter (6307), which are common tariff headings for testing kits and protective apparel respectively.

Product Range and Specialties of Chandi Associates

The product mix reflects typical Indian PPE exporters that supply disposable masks, gowns and gloves alongside hygiene devices. Face masks of 25 gsm spun‑bond polypropylene usually meet EN 14683 Level 1 or Level 2 filtration, with breathability measured in mm H₂O/cm². Hand sanitizers are generally ethanol or isopropanol based at 60‑80 % v/v, and buyers often require a minimum 70 % alcohol content for hospital use. Covid‑19 lateral‑flow testing kits are classified under HS 3822 and are expected to comply with WHO‑recommended sensitivity and specificity thresholds, often documented in a Certificate of Analysis. Disinfection solutions such as sodium‑based disinfectants are typically formulated at 0.1 % - 0.5 % available chlorine for surface decontamination.

Trade and Export Information - Chandi Associates

India exports medical PPE and diagnostic kits primarily to the Middle East, Africa, Europe and North America, using sea freight 20‑ft or 40‑ft containers for bulk sanitizers and 10‑ft cartons for masks and gloves. HS 3822.00 items usually require a pre‑export health certificate and may need registration with the importing country’s health authority. HS 6307.90 mask shipments are often inspected for compliance with the destination’s textile safety standards, such as CE marking for the EU or FDA registration for the United States. Commonly requested certifications include ISO 13485 for medical devices, CE conformity, and WHO pre‑qualification for diagnostic kits. Packaging generally follows ISO‑standardized bulk containers with moisture‑proof liners for sanitizers and sealed poly‑bags for masks and gloves, and Incoterms such as FOB or CIF are regularly used.

Sourcing from Chandi Associates - Buyer Guidance

When sourcing from Chandi Associates, buyers should request a full Material Safety Data Sheet for each chemical product, a Certificate of Analysis for the sanitizer alcohol content, and test reports confirming mask filtration efficiency (BFE ≥ 95 % for Level 2). For the Covid‑19 testing kit, a validation report showing limit‑of‑detection, cross‑reactivity data and a copy of the WHO or national regulatory approval is advisable. Verify that the face masks are produced from virgin polypropylene with the stated 25 gsm weight per ply and that the disposal bags meet the required tensile strength for medical waste handling. Confirm packaging dimensions, container loading plans and lead times before placing a purchase order, and request a sample batch for independent laboratory testing if possible.

What HS codes are associated with Chandi Associates' products?

The Covid‑19 Testing Kit is listed under HS 3822.00 (diagnostic and laboratory reagents) and the single‑piece Face Mask falls under HS 6307.90 (other made‑up articles of apparel). Other items such as sanitizers and disinfectants are typically classified under HS 3808 or HS 3824, depending on composition.

Which certifications should a buyer request for the masks?

Buyers should ask for CE conformity or ISO 9001 quality certificates, and test reports that show compliance with EN 14683 Level 1 or Level 2 filtration standards, including bacterial filtration efficiency (BFE) and pressure drop measurements.

What are the typical alcohol concentrations for the hand sanitizers offered?

Hand sanitizers in the Indian market are usually formulated with 60 %‑80 % ethanol or isopropanol. Buyers normally request a Certificate of Analysis confirming the exact alcohol percentage and a safety data sheet.

How is the Covid‑19 Testing Kit validated?

Validation typically includes sensitivity and specificity data, a limit‑of‑detection figure (e.g., 100 copies/mL), and cross‑reactivity testing against other pathogens. A buyer should request the manufacturer’s validation report and any WHO or national regulatory approval documents.

What packaging is used for bulk sanitizer shipments?

Bulk sanitizers (500 ml, 1 L, 5 L) are commonly packed in sealed PET bottles placed in 20 ft or 40 ft containers, with inner corrugated cartons to protect against breakage. The containers are usually loaded under FOB or CIF terms.

Are there typical MOQ or lead times for the disposable gowns and gloves?

Indian suppliers often set minimum order quantities of 5 000‑10 000 pieces for gowns and gloves, with lead times ranging from 30 to 45 days after order confirmation, depending on production scheduling and export documentation.

What documentation is required for the sodium disinfectant?

A Material Safety Data Sheet, a Certificate of Analysis showing available chlorine concentration, and a compliance statement with local environmental regulations are standard documents requested by importers.

How are the disposal bags designed for medical waste?

Disposal bags are typically made of high‑density polyethylene, sized to hold 50‑100 L of waste, and are sealed with a heat‑welded closure. Buyers should verify tensile strength and leak‑proof testing results before acceptance.