About XYZ test - Medical Equipment Supplier in India

XYZ test is located in Cuttack, Odisha, India and currently lists eight active products in its catalogue. The supplier’s portfolio spans household cleaning chemicals, face‑mask textiles and a selection of medical devices, each recorded with a specific HS‑code identifier in the catalogue. Products such as Apixaban tablet, Ortho Knee Cap and various disinfectant cleaners are listed under HS‑code families that correspond to pharmaceutical preparations (chapter 30), medical instruments (chapter 90) and chemical disinfectants (chapter 38). The catalogue also includes two types of face masks - a generic “Face Mask” and a “2 PLY face mask” - both assigned to textile‑article HS codes. All entries specify the primary material composition, for example nylon‑spandex blends for the knee cap and polypropylene spun‑bond with a 14 g/m² weight for the 2 PLY mask.

The eight products are described with material details such as glucose‑fructose blends for the Apixaban tablet, nylon‑fiber and long‑staple cotton yarn for the knee cap, and various oxidising agents for the cleaners. The cleaning line includes Domex Disinfectant Cleaner, CIF carpet cleaner, Marbel Floor Cleaner and Glass Cleaners, each formulated with hypochlorite, hydrogen peroxide, peracetic acid or quaternary ammonium compounds. No additional corporate history, employee numbers or revenue figures are provided in the source data.

Product Range and Specialties of XYZ test

The catalogue shows four cleaning‑chemical products that use common active ingredients like hypochlorite, hydrogen peroxide and peracetic acid, which in the industry are classified under HS 3804 (chemical disinfectants) and typically meet Indian Bureau of Indian Standards (BIS) specifications for concentration and stability. Face‑mask offerings consist of a thermoplastic polymer mask and a 2 PLY polypropylene spun‑bond mask of 14 gsm, aligning with standard non‑woven mask grades such as ASTM F2100 Level 1 (≥95 % bacterial filtration efficiency). The Ortho Knee Cap combines nylon, spandex and long‑staple cotton yarn, a material mix that matches medical‑device textile standards for durability and breathability, often referenced by ISO 10993 biocompatibility testing. The Apixaban tablet lists glucose and fructose as excipients, which is typical for oral solid dosage forms that must comply with pharmacopeial purity limits (e.g., USP <621> for residual solvents).

Trade and Export Information - XYZ test

India is a major exporter of chemical disinfectants and medical textiles, with major shipment routes to the Middle East, Africa and Southeast Asia. HS 3804 disinfectants are routinely inspected under the EU REACH regulation and may require an SDS (Safety Data Sheet) and a Certificate of Analysis for active‑ingredient concentration. Medical devices such as the Ortho Knee Cap fall under HS 9018 and generally need ISO 13485 certification, CE marking for European markets or FDA 510(k) clearance for the United States, although the supplier’s own certifications are not listed. Typical packaging for the cleaning chemicals includes 5‑L HDPE drums or 20‑L polyethylene containers, while masks are packed in sealed poly‑bags of 50 units per bag for container loading. Export logistics often use CIF (Cost, Insurance, Freight) terms and 20‑ft containers can accommodate approximately 1 000 kg of liquid cleaners or 15 000 units of masks, subject to weight limits.

Sourcing from XYZ test - Buyer Guidance

Buyers sourcing from XYZ test should request a current Material Safety Data Sheet (MSDS) for each disinfectant, confirming active‑ingredient percentages and compliance with local hazardous‑material regulations. For the 2 PLY polypropylene mask, a buyer should ask for test reports covering bacterial filtration efficiency (BFE), particle filtration efficiency (PFE) and breathability, ideally certified to ASTM F2100 or EN 14683 standards. The Ortho Knee Cap should be supplied with an ISO 10993 biocompatibility test summary and a declaration of conformity to the relevant medical‑device classification (e.g., Class IIa under EU MDR). Since the catalogue does not disclose any internal certifications, buyers are advised to verify that the supplier can provide the requested certificates before placing a purchase order.

What HS codes are associated with XYZ test’s cleaning‑chemical products?

The cleaning chemicals are listed under HS 3804, the chapter for chemical disinfectants and antiseptics, which is commonly used for products containing hypochlorite, hydrogen peroxide or peracetic acid.

Which certification should a buyer request for the 2 PLY face mask?

Buyers should request test reports that demonstrate compliance with ASTM F2100 Level 1 or EN 14683 Type II, showing at least 95 % bacterial filtration efficiency and acceptable breathability.

What documentation is typical for the Ortho Knee Cap medical device?

Typical documentation includes an ISO 13485 quality‑management certificate, an ISO 10993 biocompatibility test summary, and a CE marking declaration of conformity for EU markets.

How are the cleaning‑chemical products usually packaged for export?

Export shipments commonly use 5‑L or 20‑L HDPE drums sealed with tamper‑evident caps, and the drums are palletised for container loading under CIF terms.

What sample size is practical for testing the Apixaban tablet?

A standard sample size of 100 tablet units allows for potency testing, dissolution profiling and impurity analysis in accordance with USP <61> and <62> guidelines.

Which markets typically import Indian medical textiles like the face masks?

Key import markets include the United Arab Emirates, Saudi Arabia, Kenya and Vietnam, where buyers often require compliance with local health‑authority standards and an SDS for the polymer material.

What lead time can a buyer expect for a full container load of masks?

Lead times for a 20‑ft container of 2 PLY polypropylene masks are generally 4‑6 weeks from order confirmation, depending on production scheduling and customs clearance.

Are there any specific regulatory inspections for the disinfectant cleaners?

Disinfectant cleaners are subject to regulatory review under the Indian Drugs and Cosmetics Act and may also need REACH registration for export to the EU, requiring a Certificate of Analysis for active‑ingredient concentration.