About Shanghai Shengxiangjian Nails Co., Ltd. - Nails Supplier in China

China is the source of Shanghai Shengxiangjian Nails Co., Ltd., which currently lists 15 active products across its catalogue. The company’s top categories include nails, agriculture, iron wire and nuts, reflecting a focus on fastening and related hardware. Among the listed items are various brad nails for packaging and upholstery, concrete and roofing nails, as well as galvanized steel wire and staples. Two products provide HS‑code information: a high‑quality galvanized iron wire classified under HS 7217.20 and wholesale iron roofing nails under HS 7317.00. The catalogue also mentions drywall screws, coil nails and specialty furniture staples.

Product Range and Specialties of Shanghai Shengxiangjian Nails Co., Ltd.

Shanghai Shengxiangjian’s catalogue covers a spectrum of fasteners: brad nails of 16 ga 20° for packaging, F‑Series brad nails for upholstery, concrete and roofing nails, galvanized common coil nails, wire nails, and a variety of furniture staples (10 j and 4 j series). In the nail industry, zinc‑galvanized coatings are measured by coating thickness, typically 30 - 50 µm for interior applications and up to 100 µm for exterior exposure. Common quality grades for steel nails follow GB/T 5780, with tensile strengths ranging from 400 MPa to 600 MPa for low‑carbon steel. Galvanized iron wire supplied under HS 7217.20 usually conforms to GB/T 7000, offering tensile strengths around 300 MPa and diameters from 1.0 mm to 6.0 mm. Roofing nails classified under HS 7317.00 are often made from Q195 steel, meeting a minimum hardness of 80 HB and a coating weight of 40 g/m². Drywall screws with sharp points typically comply with GB/T 1220, featuring a thread pitch of 1.25 mm and lengths up to 120 mm. Staples used in furniture assembly are usually 0.6 mm to 1.0 mm gauge, with crown widths of 5 mm to 8 mm, and are produced from low‑carbon steel sheets. Buyers often require test reports for tensile strength, coating adhesion and dimensional tolerance for these items.

Trade and Export Information - Shanghai Shengxiangjian Nails Co., Ltd.

China is a major exporter of metal fasteners, and products such as nails, wire and staples from the region are commonly shipped to Southeast Asia, the Middle East and Europe where construction and furniture manufacturing demand high volumes. HS chapter 72 (iron and steel) and chapter 73 (articles of iron or steel) govern the customs treatment of the supplier’s galvanized iron wire (HS 7217.20) and roofing nails (HS 7317.00). Importers typically request certificates of conformity to Chinese national standards (CN), as well as third‑party test reports confirming coating thickness, tensile strength and corrosion resistance.

Standard Incoterms for bulk fasteners include FOB Shanghai or CIF major ports such as Shanghai and Ningbo, with products packed in cardboard boxes or wooden pallets, often 20 ft or 40 ft containers holding 10 - 12 tons of nails. Export documentation generally comprises a commercial invoice, packing list, certificate of origin and, when required, a phytosanitary certificate for agricultural‑related hardware. Buyers should verify that the shipment complies with the destination country’s anti‑corrosion standards, such as EN 10271 for galvanized steel products in the EU.

Sourcing from Shanghai Shengxiangjian Nails Co., Ltd. - Buyer Guidance

Sourcing from Shanghai Shengxiangjian requires buyers to request material test certificates that specify the steel grade (e.g., Q195 for roofing nails) and coating weight for galvanized items. Samples should be inspected for gauge, length, head shape and coating uniformity, and tensile test results should meet the typical 400 - 600 MPa range for low‑carbon steel nails. For wire products, a mill test report confirming diameter tolerance (±0.05 mm) and tensile strength is standard.

Buyers are advised to confirm the supplier’s ability to provide ISO 9001 quality‑management certification or an equivalent system, although this is not listed in the current facts. Clarify minimum order quantities, which for bulk nails and wire often start at one 20‑ft container (approximately 10 tons), and negotiate lead times of 30‑45 days after order confirmation. Packaging should be checked for moisture resistance, especially for galvanized products destined for humid climates.

What types of nails does the supplier offer?

The catalogue lists 16 ga 20° T‑brad nails for packaging, F‑Series brad nails for upholstery, concrete nails, galvanized common coil nails, wire nails and roofing nails. Each type is designed for specific applications such as packaging, furniture assembly or construction.

Are there specifications for the galvanized coating on the nails?

Buyers should request a coating weight certificate; industry practice for zinc‑galvanized nails is 30 - 50 µm for interior use and up to 100 µm for exterior exposure. Coating adhesion is normally verified according to ISO 1461.

What material and HS code apply to the iron wire product?

The “quality Galvanized Iron Wire” is made of low‑carbon steel wire, galvanized, and is classified under HS 7217.20. This classification covers steel wire products that are hot‑dip galvanized.

Which standards are typically applied to the roofing nails listed under HS 7317.00?

Roofing nails made from Q195 steel normally conform to GB/T 5780, with a minimum hardness of 80 HB and tensile strength around 400 MPa. They are often coated to meet EN 10271 for corrosion resistance in European markets.

What documentation should a buyer request before placing an order?

Required documents include a mill test report for steel grade, a coating weight certificate, a commercial invoice, a packing list, a certificate of origin and, where applicable, a third‑party quality inspection report. These documents verify material composition, mechanical properties and compliance with trade regulations.

What are the usual minimum order quantities and packaging formats?

Fasteners are typically shipped in 20 ft or 40 ft containers, with a common MOQ of one 20‑ft container (approximately 10 tons) for bulk nails or wire. Items are packed in cardboard boxes on wooden pallets, often with moisture‑proof liners to protect galvanized surfaces.

Which markets commonly import Chinese fasteners like these?

Major import destinations include Southeast Asian countries such as Vietnam and Thailand, Middle Eastern markets like the UAE and Saudi Arabia, and European nations such as Germany and Italy. These regions use large volumes of nails, wire and staples in construction, furniture manufacturing and packaging.