About Krishna Creations - Leather Products Supplier in India

India, Kanpur Nagar in Uttar Pradesh hosts Krishna Creations, which currently lists seven active leather‑related products in its catalogue. The product set spans hard bonded leather items (HS 4115.10), hard full‑grain leather articles (HS 4202.12), soft leather goods made from cowhide/lambskin blends (HS 4202.91), flat and round leather threads (HS 4204.00), hunter‑breaded leather threads (HS 4304.00), traditional Arba chappals with leather uppers and rubber soles (HS 6403.99), and leather‑upper sneakers with steel toe caps (HS 6403.91). Each entry specifies the material composition, ranging from bonded leather with 60‑80 % leather fibre and polyurethane binder to genuine cowhide and full‑grain leather. The catalogue groups the items under broader categories such as Leather Products, Animal Leather, Bonded Leather, Synthetic Leather, PVC Leather, Leather Chemicals, Finished Leather and Raw Leather.

The seven entries reflect a focus on both finished apparel components (footwear) and raw or semi‑finished leather materials used in downstream manufacturing. HS codes indicate placement in Chapter 41 (leather hides, skins and leather) and Chapter 64 (footwear), which aligns with standard customs classification for these goods. No additional product lines or services are listed beyond the seven items, providing a concise view of the supplier’s current offering.

Product Range and Specialties of Krishna Creations

Krishna Creations offers hard bonded leather products composed of 60‑80 % leather fibre combined with a polyurethane binder, a material that industry buyers often grade by fibre content and binder type, with typical tensile strength of 12‑18 MPa and thickness between 0.5‑1.2 mm. Full‑grain leather items are sourced from top‑grade hides, usually meeting ISO 2082 specifications for thickness (0.8‑1.5 mm) and grain quality, while soft leather goods made from cowhide/lambskin blends are commonly evaluated for softness (hand) and breathability, with standard moisture content below 12 %. Flat and round leather threads are supplied in diameters from 1 mm to 5 mm, meeting ASTM D‑1388 abrasion standards, and hunter‑breaded threads follow similar dimensions with optional artificial colour additives. Footwear products such as Arba chappals and leather‑upper sneakers are manufactured with genuine leather uppers and rubber soles, where sole thickness typically ranges from 3‑6 mm and toe‑cap steel thickness is 0.8‑1.2 mm. These categories align with common market expectations for durability, finish, and dimensional tolerances in leather‑based apparel and accessory components.

Trade and Export Information - Krishna Creations

India is a major exporter of leather and leather‑based footwear, supplying the European Union, United States, Middle East and Southeast Asian markets. HS 4115, 4202, 4204 and 4304 fall under the customs regime that frequently requires REACH compliance for chemical binders, as well as ISO 9001 quality‑management certification for manufacturers. Footwear classified under HS 6403 often needs to meet the EU’s C‑P‑A (Consumer Product Safety) requirements and the US CPSC 16 CFR 1610 standards for steel toe caps. Typical export packaging includes vacuum‑sealed poly‑bags for leather sheets and threads, and sturdy cardboard cartons for footwear, with container loading ranging from 18‑20 ft³ per 20‑ft container for flat goods and 12‑14 ft³ for bulkier footwear. Common Incoterms used by Indian leather exporters are FOB Kanpur or CIF major ports such as Mumbai, allowing buyers to manage freight and insurance according to their logistics preferences.

Sourcing from Krishna Creations - Buyer Guidance

When sourcing from Krishna Creations, buyers should request material safety data sheets (MSDS) for the polyurethane binder in bonded leather, as well as leather‑grade certificates that confirm fibre content and compliance with ISO 2082. Test reports for tensile strength, abrasion resistance (ASTM D‑1388) and colour fastness (ISO 105‑B02) are standard documents for raw leather and thread products. For footwear, buyers typically ask for sole hardness (Shore A) measurements, steel toe cap impact test results (ASTM F‑2413) and any applicable REACH or C‑P‑A declarations. Verifying the HS code on the commercial invoice against the product description helps avoid customs delays, and confirming packaging dimensions (e.g., 0.5 m × 0.4 m × 0.3 m cartons for chappals) supports accurate freight quoting. Samples of each leather type and finished footwear are advisable before placing bulk orders to assess grain quality, stitching, and finish consistency.

What leather materials does Krishna Creations list in its catalogue?

The catalogue includes hard bonded leather (60‑80 % leather fibre with polyurethane binder), full‑grain leather, soft animal leather blends of cowhide and lambskin, genuine cowhide leather for threads, and leather used in footwear uppers.

Which HS codes are associated with the listed products?

Hard bonded leather is HS 4115.10, hard full‑grain leather is HS 4202.12, soft leather goods are HS 4202.91, flat and round leather threads are HS 4204.00, hunter‑breaded leather threads are HS 4304.00, Arba chappals are HS 6403.99 and leather‑upper sneakers are HS 6403.91.

What typical certifications should a buyer request for these leather products?

Buyers usually request ISO 9001 for quality management, REACH compliance for chemical binders, and specific test reports such as ISO 2082 for leather thickness, ASTM D‑1388 for thread abrasion, and ASTM F‑2413 for steel‑toe footwear caps.

What are common specifications for the bonded leather offered?

Bonded leather commonly has a tensile strength of 12‑18 MPa, thickness between 0.5‑1.2 mm, and a fibre content of 60‑80 % with a polyurethane binder, meeting the standards of Chapter 41 customs classification.

What sample or testing information is advisable before ordering?

Request sample swatches showing grain pattern and colour, tensile strength test reports, moisture content analysis (below 12 %), and for footwear, sole hardness (Shore A) and steel‑toe impact test results.

What are typical minimum order quantities and lead times for these items?

Minimum order quantities vary by product type; raw leather sheets and threads often start at 500 kg per SKU, while finished footwear usually begins at 200 pairs. Lead times reported by Indian leather exporters range from 30 days for raw materials to 60‑90 days for fully finished footwear.

How are the products typically packaged for export?

Raw leather and threads are vacuum‑sealed in poly‑bags and packed in double‑wall cardboard cartons; footwear is boxed in sturdy cartons with internal dividers, and all items are loaded into 20‑ft or 40‑ft containers according to volume.

Which regions are the primary import markets for Indian leather products?

The European Union, United States, Middle East (especially United Arab Emirates and Saudi Arabia) and Southeast Asian countries such as Vietnam and Thailand are the main destinations for Indian leather and leather‑based footwear.