About Infinity Exporters - Pipe Fittings Supplier in India

Infinity Exporters is based in Ahmedabad, Gujarat, India and lists ten distinct products in its catalogue. The company focuses on plastic pipe and fitting solutions, covering high‑density polyethylene (HDPE), medium‑density polyethylene (MDPE) and polypropylene (PP) families. All items fall under HS Chapter 39, primarily codes 3917.xx for pipes and fittings, and 8481.80 for a polypropylene ball valve. The product set includes pipe fittings, electrofusion components, spigot fittings, compression saddles and industrial valves. The catalogue reflects a concentration on building fittings, pipe valves and plumbing components.

Product Range and Specialties of Infinity Exporters

Infinity Exporters’ catalogue comprises HDPE pipe fittings, electrofusion couplings, spigot and fabricated fittings, MDPE pipes, PP compression saddles, service saddles and a polypropylene ball valve. In the polyethylene sector, buyers typically require PE100 or PE80 grades that meet ISO 4427 for water service and ASTM D2513 for pressure piping, with pressure ratings from PN 6 (6 bar) up to PN 25 (25 bar). Polypropylene compression fittings are usually supplied as virgin homopolymer meeting ASTM D3350 and are rated for temperatures up to 80 °C. Ball valves of PP are often sized DN 15 to DN 1000 and conform to ISO 6301 for valve dimensions. Standard dimensions for HDPE fittings span DN 20 to DN 2000, with wall thicknesses defined by SDR 11 to SDR 21, providing a clear reference for engineering specifications.

Trade and Export Information - Infinity Exporters

Indian manufacturers of HDPE and PP pipe components commonly ship to the Middle East, East Africa, Southeast Asia and select European markets, where water‑distribution, irrigation and gas‑transport projects drive demand. The HS 3917 series classifies these products as plastic pipes, fittings and hollow sections, while HS 8481.80 covers valves, and customs authorities often require accompanying material test reports and compliance certificates. Typical import requirements include ISO 9001 quality management, ISO 14001 environmental management and, where applicable, CE marking for EU destinations. Export shipments are generally packed in 20‑foot or 40‑foot containers on wooden pallets, with the fittings bundled in cardboard or shrink‑wrapped boxes to protect against deformation. Indian export regulations mandate conformity to BIS standards for plastic piping, and buyers frequently request pre‑shipment inspection reports under SGS or Bureau Veritas.

Sourcing from Infinity Exporters - Buyer Guidance

Prospective buyers should request a full material test report (MTR) confirming PE100/PE80 or PP grade, melt flow index and density, together with pressure‑test certificates that verify compliance with ISO 4427 or ASTM D2513. Verification of the HS code on the commercial invoice must match the catalogue entry to avoid customs delays, and buyers are advised to obtain the supplier’s ISO 9001 and ISO 14001 certificates before finalising contracts. Sample orders of at least one size per fitting type are standard practice to assess dimensional tolerances, which are typically ±0.5 mm for DN ≤ 200 and ±1 mm for larger diameters. Lead times for bulk production in Gujarat range from 30 to 45 days after receipt of a confirmed purchase order, with minimum order quantities often set at 500 units per size or 5 metric tonnes for pipe lengths.

What types of pipe fittings are listed by Infinity Exporters?

Infinity Exporters lists HDPE pipe fittings, PE electrofusion fittings, HDPE spigot fittings, fabricated HDPE fittings, PP compression fittings, PP service saddles and a polypropylene ball valve. The range covers standard coupling, transition and valve solutions for water, gas and industrial pipelines.

Which HS codes correspond to the HDPE pipe fittings in the catalogue?

The HDPE pipe fittings appear under HS 3917.29 and HS 3917.39. Other HDPE fittings such as fabricated fittings and spigot fittings use HS 3917.21 or HS 3917.40, depending on the product type.

What material grades are used for the MDPE pipes offered?

MDPE pipes are supplied in the MDPE grade, most commonly PE80 or PE100. They are classified under HS 3917.23 in the export catalogue.

Which certifications are commonly required for these plastic pipe products?

Typical certification requirements include ISO 9001 quality management and ISO 14001 environmental management. For European buyers CE marking is often required, and material test reports should reference ISO 4427 or ASTM D2513 standards.

How are the products packaged for international shipment?

Products are packed in cardboard boxes or shrink‑wrapped bundles, placed on wooden pallets, and loaded into 20‑ft or 40‑ft containers. Bulk pipe lengths are coiled or bundled to maximise container space and protect against damage.

What are typical minimum order quantities and lead times?

Minimum order quantities are usually 500 units per fitting size or 5 metric tonnes for pipe shipments. Production lead time after order confirmation typically ranges from 30 to 45 days.

Which regions are the main importers of Indian HDPE fittings?

The main import markets for Indian HDPE and PP fittings are the Middle East, East Africa, Southeast Asia and selected European countries. These regions use the products for water distribution, irrigation, gas conveyance and construction projects.

How can a buyer obtain samples or test reports?

Buyers may request a sample of each required size together with the latest material test report and copies of relevant certifications. Samples are commonly shipped by air freight and arrive within 5‑7 business days.