About Gujarat Packaging Industries - Packaging Supplier in India

India‑based Gujarat Packaging Industries lists 18 active products in its catalogue. The portfolio covers Kraft paper, various packaging items, salts, silica sand, polypropylene (PP) plastic bags, activated carbon, ceramic tiles, and several agricultural seeds such as sesame, cumin and peanuts. Each entry is tied to a specific HS‑code family where provided, for example silica sand is recorded under HS 2505.10. The supplier is classified in the “harbor” trust tier, indicating a moderate level of verification in the marketplace.

The catalogue includes items like Packaging Craft Paper, PP Strap, Stretch Film, Kraft and Corrugated Paper Rolls, Pure Cotton Biodegradable Bags, Water‑Softening Salt tablets, Activated Carbon, Quartz/Media/Silica Sand, Ceramic Tiles, and Anthracite Coal among others. Two separate silica sand entries share the same HS code (2505.10) and are described as natural white SiO₂ crystals with purity above 99 %. The range also mentions Duplex Board, Gravel Pebbles and Bio‑Degradable Bags, showing a focus on both conventional and environmentally‑focused packaging solutions.

Product Range and Specialties of Gujarat Packaging Industries

The listed products span several packaging‑related categories. Kraft paper and corrugated rolls are typically supplied in grades ranging from 70 g/m² to 150 g/m², with common standards such as ISO 536 for grammage and FSC certification for forest‑origin compliance. PP plastic bags and straps are usually produced in thicknesses from 30 µm to 120 µm and are tested for tensile strength in the 20 - 40 MPa range. Silica sand items under HS 2505.10 are offered as white crystal granules or powder, often meeting the 99 % SiO₂ purity requirement used in glass‑making and casting industries. Activated carbon is generally graded by iodine value (typically 800 - 1200 mg/g) and ash content below 5 %. Ceramic tiles are shipped in standard formats such as 300 mm × 300 mm or 600 mm × 600 mm with water absorption rates below 0.5 % for vitrified grades. Agricultural seeds like sesame, cumin and peanuts are measured by moisture content (≤ 6 %) and purity (≥ 98 %).

Trade and Export Information - Gujarat Packaging Industries

India exports packaging materials and mineral commodities to regions including the Middle East, Southeast Asia, Europe and North America. Silica sand (HS 2505.10) is a key input for glass manufacturers and foundries, and shipments are often accompanied by a Certificate of Origin and a laboratory analysis confirming SiO₂ content. Packaging papers and PP bags fall under HS 4810‑4819 and HS 3920‑3921 respectively; buyers typically request FSC or ISO 9001 compliance certificates and a test report for burst strength or puncture resistance. Ceramic tiles are classified under HS 6907 and are subject to EU REACH or US ASTM C373 testing for dimensional stability. Export logistics commonly use 20‑ft or 40‑ft containers, with FOB or CIF terms, and pallets are shrink‑wrapped to meet international handling standards.

Sourcing from Gujarat Packaging Industries - Buyer Guidance

When sourcing from Gujarat Packaging Industries, buyers should ask for product data sheets that list grammage for Kraft paper, tensile strength for PP bags, SiO₂ purity for silica sand, iodine value for activated carbon, and moisture/impurity levels for seeds. Requesting an independent lab analysis or a third‑party inspection report (e.g., SGS or Bureau Veritas) helps verify the specifications cited in the catalogue. Typical documentation includes a Certificate of Origin, ISO 9001 quality system certificate if available, and for paper products an FSC or PEFC chain‑of‑custody statement. Verify packaging details such as pallet dimensions, inner‑box count, and whether the biodegradable bags meet ASTM D6400 or EN 13432 standards before confirming the order.

What product categories does Gujarat Packaging Industries list in its catalogue?

The catalogue contains 18 items covering Kraft and corrugated paper rolls, PP straps and bags, stretch film, silica and quartz sand (HS 2505.10), activated carbon, ceramic tiles, water‑softening salt tablets, various seeds (sesame, cumin, peanuts), anthracite coal, gravel pebbles, duplex board and biodegradable bags.

Which HS code is associated with the silica sand products?

Both silica sand entries are recorded under HS 2505.10, which applies to natural or artificial silica sand and quartz sand used in industrial applications.

What typical specifications should I check for the PP plastic bags?

Buyers usually verify thickness (30‑120 µm), tensile strength (20‑40 MPa), puncture resistance and the melt flow index of the polypropylene resin. Packaging dimensions and load‑bearing capacity are also standard checks.

Are there standard quality certifications for the Kraft paper?

While the supplier’s specific certifications are not listed, buyers normally request FSC or PEFC chain‑of‑custody certificates and an ISO 9001 quality management system audit for paper products.

What documentation is recommended for the silica sand shipment?

A Certificate of Origin, a laboratory analysis confirming ≥ 99 % SiO₂ purity, and a third‑party inspection report (e.g., SGS) are typical requirements for silica sand exports.

What are common MOQs and lead times for the ceramic tiles?

Industry practice for ceramic tiles is an MOQ of one full 20‑ft container (approximately 1,000 tiles) with lead times ranging from 30 to 45 days from order confirmation, depending on size and finish.

How are the biodegradable bags tested for compliance?

Buyers usually request compliance with ASTM D6400 or EN 13432, which involve tests for compostability, tensile strength, and degradation rate under controlled conditions.

What packaging and shipping format is used for bulk sand orders?

Bulk silica sand is typically packed in 20‑ft or 40‑ft containers on sturdy wooden pallets, shrink‑wrapped, and shipped under FOB or CIF terms with a moisture content check before loading.