About Gaomi Huafu Labor Protection Supplies Co., Ltd. - Industrial Gloves Supplier in China

Gaomi Huafu Labor Protection Supplies Co., Ltd. is located in China and currently lists six active products. The catalogue includes nitrile palm coating safety work gloves, PU coated work gloves, black PVC rain boots, standard safety shoes, model No.8055 work boots, and model NO.9148 safety shoes. These items fall under the industrial gloves and industrial safety shoes categories, which are typically classified under HS chapter 61 for protective gloves and chapter 64 for safety footwear. The supplier’s portfolio therefore covers both hand and foot personal protective equipment (PPE) used in manufacturing, construction and agricultural settings.

The glove offerings feature nitrile palm coating and polyurethane (PU) coating, materials commonly evaluated against EN 388 impact, abrasion, cut and puncture resistance grades. The footwear range includes steel‑toe or composite‑toe safety shoes and PVC rain boots, which are generally tested to EN ISO 20345 for slip resistance, toe protection and water resistance. All six products are listed without explicit certification claims, so buyers should verify conformity to the relevant European or Asian safety standards before purchase.

Product Range and Specialties of Gaomi Huafu Labor Protection Supplies Co., Ltd.

The catalogue lists two glove types - nitrile palm coating safety work gloves and PU coated work gloves - and four footwear items: standard safety shoes, model NO.9148 safety shoes, model No.8055 work boots and black PVC rain boots. In the industrial glove market, nitrile coatings are valued for chemical resistance and oil resistance, typically meeting grade 3 or 4 in the EN 388 series. PU‑coated gloves provide enhanced grip and abrasion resistance, often falling into EN 388 grade 2‑3‑2‑2. Safety shoes and boots from China are usually produced in sizes ranging from EU 36 to 48, with sole hardness measured in Shore A and slip resistance evaluated by the coefficient of friction (COF) on wet surfaces.

Footwear such as the black PVC rain boots is designed for waterproof performance, with PVC thickness commonly specified between 1.5 mm and 2.0 mm. The work boots No.8055 and safety shoes NO.9148 typically incorporate steel or composite toe caps meeting a 200 J impact resistance, and the outsole may comply with anti‑static or conductive requirements for electronics assembly environments.

Trade and Export Information - Gaomi Huafu Labor Protection Supplies Co., Ltd.

China is a major exporter of personal protective equipment (PPE), and industrial gloves and safety shoes from the country are shipped primarily to Europe, North America, the Middle East and Southeast Asia. Buyers usually request HS code 6116 for coated gloves and HS code 6405 for safety footwear, which determines duty rates and inspection regimes. Export shipments are commonly packed in cardboard boxes of 50‑100 pairs per carton for gloves, and in wooden crates or bulk pallets for footwear, with a typical 20‑ft container holding up to 1,200 pairs of gloves or 1,500 pairs of shoes.

International buyers often require certificates such as CE marking, ISO 9001 quality management, and test reports confirming EN 388 or EN ISO 20345 compliance. Chinese PPE manufacturers may also provide SGS or Intertek inspection reports on request. Incoterms most frequently used are FOB Shanghai or CIF destination port, with freight forwarders handling moisture‑proof packaging for rain boots to prevent deformation during sea transport.

Sourcing from Gaomi Huafu Labor Protection Supplies Co., Ltd. - Buyer Guidance

When sourcing gloves from Gaomi Huafu, request material safety data sheets (MSDS) for the nitrile and PU compounds, as well as EN 388 test certificates indicating impact, abrasion, cut and puncture grades. For safety shoes and boots, obtain CE conformity statements, ISO 20345 test reports, and details on toe‑cap material (steel or composite) and sole anti‑slip ratings. Verify that product dimensions, such as glove palm thickness (typically 0.6 mm to 1.0 mm) and shoe sole hardness, match the specifications required for your end‑use.

Samples should be requested in the intended size range and inspected for coating adhesion, seam integrity and sizing consistency. Confirm the supplier’s lead time, which for PPE of this type in China is usually 30‑45 days after order confirmation, and clarify the minimum order quantity, often set at one full container load or a minimum of 500 pairs for gloves and 800 pairs for shoes. Ensure that the final shipment includes a packing list, commercial invoice and any requested test reports to facilitate customs clearance.

What types of industrial gloves does the supplier offer?

The supplier lists nitrile palm‑coated safety work gloves and PU‑coated work gloves, both intended for general‑purpose industrial use and typically evaluated against EN 388 performance grades.

Are the safety shoes certified to any standard?

The catalogue does not state specific certifications, so buyers should request CE conformity or EN ISO 20345 test reports that verify impact resistance, slip resistance and water resistance.

What material is used for the black PVC rain boots?

The rain boots are made from PVC, a waterproof polymer commonly supplied in thicknesses of 1.5 mm to 2.0 mm for protective footwear.

Which HS codes are normally applied to these products?

In international trade, coated gloves fall under HS code 6116, while safety shoes and boots are classified under HS code 6405.

What documentation should a buyer ask for before placing an order?

Request material safety data sheets, EN 388 or EN ISO 20345 test certificates, CE or other conformity marks, and a third‑party inspection report such as SGS or Intertek.

What are typical minimum order quantities and lead times for these PPE items?

Suppliers in China often set a MOQ of one full 20‑ft container or at least 500 pairs of gloves and 800 pairs of shoes, with a production lead time of 30‑45 days after order confirmation.

How are the products packaged for export?

Gloves are usually packed in cardboard boxes of 50‑100 pairs per carton, while shoes and boots are placed in bulk pallets or wooden crates, with moisture‑proof liners used for rain boots to prevent deformation during sea shipment.