About Fujian Willda Machinery Electrical Co., Ltd. - Electric Motors Supplier in China

Fujian Willda Machinery Electrical Co., Ltd. is a China-based supplier operating from Fujian province with 9 active product listings concentrated in two catalogue areas: Electric Motors and Light & Medium Machinery. The catalogue is built almost entirely around small and medium-power AC induction motors, with eight of the nine listings covering three-phase and single-phase induction units in aluminium housings, plus one entry referencing the ANP motor GOST standard used in the Russian market. Frame sizes, pole counts and series identifiers visible across the listings (MS132M-6, ML712-4, MC712-2, YC series, Y2 series, YC80a-4) indicate the supplier covers IEC metric frame motors from small fractional-horsepower single-phase units up through medium three-phase outputs typically rated in the 0.55 kW to 22 kW band used in fans, pumps, compressors and general industrial drives. The product mix points to a manufacturer-exporter focused on commodity-grade industrial motors rather than specialised servo, explosion-proof or high-efficiency IE3/IE4 premium lines. Aluminium-housing construction across the MS, ML, MC and YC/Y2 series listings is the dominant build, which is the standard lightweight configuration for general-purpose motors sold into HVAC, agricultural machinery, small machine tools and OEM equipment builders. Buyers reviewing the catalogue should expect the supplier to engage on standard IEC frame dimensions (56, 63, 71, 80, 90, 100, 132), B3/B5/B14 mounting variants, and 50 Hz / 60 Hz dual-frequency operation, all of which are typical for this segment of Chinese motor exports.

Product Range and Specialties of Fujian Willda Machinery Electrical Co., Ltd.

The catalogue spans nine SKUs across two related families. The three-phase side is led by the MS series aluminium-body motors (MS three-phase AC induction motor and MS132M-6 aluminium three-phase induction motor), supplemented by the Y2 series three-phase AC electric motor, which is one of the most widely produced Chinese IEC-frame motor lines in the 0.75 kW to 22 kW range. Single-phase coverage includes the ML712-4 four-pole dual-value capacitor motor, the MC712-2 aluminium-housing single-phase motor, and the YC80a-4 heavy-duty single-phase induction motor, addressing the fractional-horsepower segment typically rated from 0.25 kW up to roughly 3 kW for workshop machinery, pumps and small compressors. The ANP motor listing referencing the GOST standard signals a variant built to the Russian/CIS certification regime rather than the default IEC/CE/CCC path. Industry context for this category: aluminium-housing induction motors in the MS, Y2 and YC series are normally produced to IEC 60034 dimensional and performance standards, with insulation class F (155 °C) and IP54 or IP55 protection as the default build. Three-phase units in this frame range typically carry IE2 efficiency as a baseline, with IE3 available on request from many Chinese mills, while single-phase YC-type motors are usually dual-capacitor (start + run) designs rated for S1 continuous duty at 220-240 V / 50 Hz. Buyers in this segment commonly specify frame size, shaft height, mounting configuration (B3 foot, B5 flange, B14 face), pole count (2, 4, 6), terminal box position and ambient temperature rating when comparing offers.

Trade and Export Information - Fujian Willda Machinery Electrical Co., Ltd.

Chinese electric motor exports of the IEC induction type covered here typically ship under HS code 8501.10 (motors of an output not exceeding 37.5 W), 8501.20 (universal AC/DC motors), 8501.31 (other DC motors) and most commonly 8501.40 (other AC motors, single-phase) and 8501.52 (AC motors, multi-phase, 750 W to 75 kW), with frame sizes 71 to 132 falling squarely in the 8501.40 and 8501.52 sub-headings. The principal destination regions for this grade of Chinese motor are Southeast Asia, the Middle East, Africa, South America and the CIS/Russia, where the GOST-referenced ANP listing fits. Standard export packaging is wooden crate or plywood pallet with shrink-wrap, typically loaded 20 ft or 40 ft container, with each motor individually foam-protected and shaft-locked. Common documentation requested by importers in this category includes a commercial invoice, packing list, certificate of origin (Form E for ASEAN, FORM A for GSP, or general COO for non-preferential markets), and for the Russian/CIS route a GOST-R or EAC conformity certificate. Industry-standard third-party inspections for motor exports are usually SGS, BV or TUV pre-shipment inspections covering nameplate data, hi-pot test, no-load current, insulation resistance and rotor bar integrity. Sea freight from Fujian ports (Fuzhou or Xiamen) to most major destinations runs 18 to 35 days depending on route, and Incoterms FOB, CFR and CIF are the most common terms quoted for motor shipments of this size and weight class.

Sourcing from Fujian Willda Machinery Electrical Co., Ltd. - Buyer Guidance

For buyers evaluating this supplier, the first step is to confirm the exact frame size (IEC 56, 63, 71, 80, 90, 100, 132), rated power in kW or HP, voltage, frequency (50 Hz vs 60 Hz), pole count and mounting configuration (B3/B5/B14) for each line of interest, since the catalogue names alone do not pin down the full SKU. Request the nameplate data sheet and a type-test report covering no-load current, locked-rotor current, full-load efficiency, power factor, noise level in dB(A) and insulation class. For shipments destined for Russia or other EAC markets, ask specifically for the GOST/EAC certificate covering the ANP motor line, and for EU or North American buyers ask for CE marking documentation and, where relevant, IE2 or IE3 efficiency test reports per IEC 60034-30-1. Lead times for standard MS, Y2 and YC series motors from Chinese mills typically run 15 to 30 days for stocked frames and 30 to 45 days for made-to-order specifications, with MOQ often starting at one full pallet or around 20 to 50 units depending on frame size. Before issuing a purchase order, buyers should request a pre-production sample with measured test data, confirm the terminal box position and cable entry direction on the drawing, and verify that the supplier's declared IP rating (commonly IP54 or IP55) is backed by a test certificate rather than a generic datasheet claim. Third-party pre-shipment inspection by SGS, BV or TUV is standard practice in this category and is recommended for any first order above a single container.

What product categories does Fujian Willda Machinery Electrical Co., Ltd. supply?

The supplier lists 9 active products concentrated in Electric Motors and Light & Medium Machinery, covering MS, Y2, ML, MC and YC series aluminium-housing AC induction motors in both three-phase and single-phase configurations, plus an ANP motor built to the Russian GOST standard.

Which HS codes apply to the motors in this catalogue?

Single-phase AC induction motors of the type listed typically classify under HS 8501.40, while three-phase units in the 750 W to 75 kW frame range covered by the MS and Y2 series fall under HS 8501.52. Sub-fractional motors below 37.5 W would sit under 8501.10. Buyers should confirm the exact sub-heading with their customs broker based on rated output.

Which certifications should I request before ordering?

For general export markets ask for CE marking and a type-test report per IEC 60034; for Russia and CIS destinations request the GOST-R or EAC conformity certificate covering the ANP motor line; for North America ask about UL or CSA recognition depending on the end-use equipment. Efficiency class documentation per IEC 60034-30-1 (IE2 or IE3) is also commonly requested.

What are the typical specifications for the MS, Y2 and YC series motors listed?

These are aluminium-housing IEC-frame induction motors, typically produced in frame sizes 56 to 132, with insulation class F (155 °C), IP54 or IP55 protection, and ratings from 0.25 kW up to roughly 22 kW. Three-phase units are normally 380 V / 50 Hz (or 220/380 V / 60 Hz dual-frequency), while single-phase YC-type units are 220-240 V / 50 Hz with dual-capacitor start-and-run designs.

What is the usual MOQ and lead time for orders?

MOQ for standard stocked frames in this segment commonly starts at one pallet (roughly 20 to 50 units depending on frame size). Lead times are typically 15 to 30 days for in-stock specifications and 30 to 45 days for made-to-order voltages, pole counts or mounting configurations.

Which packaging and shipping methods are standard for motor exports?

Motors are normally packed individually in cartons with foam protection, then palletised and shrink-wrapped, with 20 ft or 40 ft container loads being the standard export unit. Sea freight from Fujian ports is the most common mode, with Incoterms FOB, CFR and CIF the typical terms quoted for this product class.

Which regions typically import this category of Chinese motor?

Aluminium-housing IEC-frame induction motors from China in this power range are commonly shipped to Southeast Asia, the Middle East, Africa, South America and the CIS/Russia. The presence of the ANP GOST-standard motor in the catalogue indicates the supplier has experience with the Russian and CIS conformity regime.

How should I verify quality before shipment?

Request a pre-production sample with full type-test data (no-load current, locked-rotor current, efficiency, power factor, noise in dB(A), insulation resistance), and commission a third-party pre-shipment inspection by SGS, BV or TUV covering nameplate verification, hi-pot test and visual build quality. Confirm the declared IP rating and insulation class are backed by test certificates rather than generic catalogue claims.