About Chang Yuan Spraying Technology Co., Ltd. - Nozzle Supplier in China

China hosts Chang Yuan Spraying Technology Co., Ltd., which currently lists 13 distinct spray‑nozzle products. The supplier’s catalogue is organised under the Nozzle and Agriculture categories and includes models such as high‑pressure tank nozzles, needle nozzles for paper making, low‑pressure plastic misting nozzles and a variety of quick‑install designs. Each entry specifies a functional type rather than a material grade, indicating a focus on diverse spray applications across industrial and agricultural settings. The product set covers both high‑pressure cleaning equipment and low‑pressure humidification or fogging solutions, reflecting a broad technical scope within the nozzle market.

The 13 products range from the 360 Clean Nozzle and High Pressure Needle Nozzle to the Plastic Dry Fog Humidifier and Quick Install Clamp Nozzle. Product names frequently combine pressure level (high, low), spray pattern (flat jet, fog, mist) and installation method (quick install, clamp). No HS‑code details are supplied in the source data, but the items fall under the typical HS chapter 84 family for spray equipment. This factual inventory forms the basis for buyers seeking specific nozzle functions from a Chinese manufacturer.

Product Range and Specialties of Chang Yuan Spraying Technology Co., Ltd.

The catalogue presents a concrete list of nozzle types: 360 Clean Nozzle, High Pressure Needle Nozzle, Low Pressure Plastic Misting Nozzle, Anti‑Drop Misting Nozzle, Uni Jet Flat Jet Spray Nozzle, K2 Mixing Fluid Water and Wind Jet Spray Nozzle, Automatic Atomizing Nozzle, 19250 Cleaning Nozzle, Cooling Tower Spray Nozzle, Plastic Dry Fog Humidifier, Plastic Clamp Spray Nozzle, several pattern‑adjustable Quick Install Nozzles, and a Plastic Nozzle variant. Industry practice for such products distinguishes between stainless‑steel constructions (often grades 304 or 316) for high‑pressure and abrasive applications, and engineering plastics such as polycarbonate or polyethylene for low‑pressure misting and fog devices. Typical performance specifications include pressure ratings from below 0.5 MPa for misting nozzles up to 20 - 30 MPa for tank and cleaning nozzles, flow rates measured in L/min, and spray angles ranging from narrow jets to wide fans. Standards frequently referenced include ISO 22871 for spray‑nozzle performance and ASTM F181 for material durability.

Trade and Export Information - Chang Yuan Spraying Technology Co., Ltd.

China is a global exporter of industrial spray‑nozzle equipment, with major import destinations in Southeast Asia, the European Union and North America. The HS‑code most commonly applied to the types listed is 8424.90, covering spray nozzles of all materials. Buyers generally require compliance with CE marking, ISO 9001 quality‑management certification, and where the nozzle may be used in hazardous atmospheres, UL or IECEx approvals. Export shipments are typically packed in sealed cardboard boxes on wooden pallets, loaded into 20‑ft or 40‑ft containers, and shipped under FOB Shanghai or CIF terms to the buyer’s port. Chinese manufacturers often provide an export license and a commercial invoice that reference the HS code and material composition for customs clearance.

Sourcing from Chang Yuan Spraying Technology Co., Ltd. - Buyer Guidance

When sourcing from Chang Yuan, request a detailed product data sheet that lists material type, pressure rating, flow‑rate, spray angle and any applicable ISO or ASTM test results. Confirm the presence of a CE Declaration of Conformity and, if required for the end‑use, UL or IECEx certificates; these documents should be supplied before the first shipment. Verify the minimum order quantity - typically around 500 pieces per model - and allow 30‑45 days for production after sample approval, with packaging specified as individual sealed boxes on pallets for container loading.

What types of spray nozzles does Chang Yuan offer?

The catalogue lists 13 models, including high‑pressure tank nozzles, needle nozzles for paper making, low‑pressure plastic misting nozzles, anti‑drop fog nozzles, flat‑jet air nozzles, mixing‑fluid jet nozzles, automatic atomizing nozzles, cleaning tank nozzles, cooling‑tower spiral nozzles, dry‑fog humidifier nozzles, quick‑install clamp nozzles and several pattern‑adjustable quick‑install designs.

Which material grades are typical for these nozzles?

Industry practice uses stainless‑steel grades such as 304 or 316 for high‑pressure or corrosive environments, while low‑pressure misting and fog applications often employ engineering plastics like polycarbonate or polyethylene. The product names indicating plastic misting or clamp designs suggest the latter material is common for those models.

What pressure ranges should buyers verify?

High‑pressure tank and needle nozzles are usually rated up to 20 - 30 MPa, whereas low‑pressure misting and fog nozzles operate below 0.5 MPa. Buyers should obtain the exact pressure rating for each model before finalising the order.

Which certifications are normally required for importing spray nozzles from China?

Importers typically request a CE Declaration of Conformity, ISO 9001 quality‑management certification, and, where the nozzle may be used in explosive atmospheres, UL or IECEx approval. These certificates confirm compliance with safety and quality standards expected in major markets.

What documentation is advisable before placing an order?

Ask for a product data sheet, material composition test report, flow‑rate and spray‑pattern test results, and the supplier’s export license. The HS code for most of these items is 8424.90, which should appear on the commercial invoice.

What are typical packaging and shipping methods?

Nozzles are packed in sealed cardboard boxes, stacked on wooden pallets, and loaded into 20‑ft or 40‑ft containers. FOB Shanghai or CIF to the buyer’s destination port are common Incoterms used by Chinese nozzle exporters.

What are standard minimum order quantities and lead times?

The industry minimum is around 500 pieces per SKU, with a production lead time of 30 - 45 days after order confirmation and receipt of any required sample approvals.