About Zhanyu Moulds & Hardware Accessories Co., Ltd. - Agriculture Supplier in China

China hosts Zhanyu Moulds & Hardware Accessories Co., Ltd., which currently lists 47 active products across its catalogue. The supplier’s offerings span components for agricultural machinery and precision nozzle systems, including molybdenum wire, various AWT slide belts, cutters, wave washers and jet nozzles. In addition, the list contains wire guides and power feed contacts specifically designed for Makino machine tools. All items are identified by part numbers that correspond to standard CNC accessory naming conventions, providing clear reference for buyers. The catalogue reflects a focus on aftermarket replacement parts rather than original equipment manufacturing.

The product list also references major machine tool brands such as Sodick, Fanuc, Charmilles and Mitsubishi, indicating compatibility with a broad range of equipment. Entries like "For Makino of Jet Nozzle 23EC085A217" and "For Makino of Wire Guide 20EC090A207" demonstrate model‑specific support. The inclusion of molybdenum wire points to capability in electrical discharge machining (EDM) applications. Each catalogue entry is presented without detailed specifications, leaving dimensions and material grades to be confirmed through buyer inquiry. Consequently, Zhanyu’s portfolio covers hardware accessories used in both agricultural equipment and high‑precision machining environments.

Product Range and Specialties of Zhanyu Moulds & Hardware Accessories Co., Ltd.

Zhanyu’s catalogue lists molybdenum wire, AWT slide belts, cutters, wave washers, jet nozzles and related hardware accessories. In the CNC accessory market molybdenum wire is commonly supplied in diameters from 0.1 mm to 0.5 mm for EDM electrodes, with purity levels above 99.5 %. AWT slide belts are typically fabricated from polyester or aramid reinforcement, offering tensile strengths between 150 N/mm² and 300 N/mm² and are cut to lengths such as 200 mm or 205 mm as reflected in the part numbers. Jet nozzles for precision spray applications are usually made from hardened stainless steel (often 1.4404) and are specified by orifice diameter and spray angle, for example 0.5 mm or 30°. The presence of wire guides and power feed contacts shows that the supplier also provides components requiring tight dimensional tolerances (±0.01 mm) and high electrical conductivity for high‑speed machining.

Agricultural hardware such as wave washers is generally produced from spring steel with hardness ratings of 45‑55 HRC to endure cyclic loads. Buyers in the agricultural sector often request corrosion‑resistant zinc‑nickel plating to extend service life in outdoor conditions. The numeric suffixes in the identifiers (e.g., 3080711) correspond to internal batch or size codes commonly used in Chinese export catalogs. These items are typically packed in 20 kg cardboard boxes or in wooden crates for bulk shipments, facilitating standard container loading.

Trade and Export Information - Zhanyu Moulds & Hardware Accessories Co., Ltd.

China is a leading exporter of CNC accessories and agricultural hardware, with shipments frequently routed to Europe, North America and Southeast Asia under HS Chapter 84 (machinery) and Chapter 73 (iron and steel products). Exporters of slide belts, cutters and wire guides usually operate under ISO 9001 quality‑management systems and may need CE marking or RoHS compliance for markets in the EU and the United States. Standard packaging includes 20‑ft or 40‑ft containers, often with individual parts sealed in anti‑static bags to protect against moisture and static discharge. Typical Incoterms employed by Chinese suppliers are FOB Shanghai or CIF destination port, allowing buyers to arrange customs clearance and insurance. While Zhanyu’s specific certifications are not listed, buyers should request material certificates, test reports and any applicable conformity declarations before finalizing an order.

Exporters of agricultural components such as wave washers are generally subject to standard customs valuation, with phytosanitary inspection only required when organic residues are present. High‑precision nozzle parts may be inspected for dimensional conformity against technical drawings and undergo hardness testing by third‑party agencies. Buyers often engage freight forwarders experienced in handling delicate CNC parts to mitigate vibration damage during sea transport. Payment terms commonly involve a letter of credit or T/T after shipment, aligned with standard international trade practice.

Sourcing from Zhanyu Moulds & Hardware Accessories Co., Ltd. - Buyer Guidance

Prospective buyers should obtain a detailed specification sheet that lists material grade, exact dimensions, tolerance limits and surface finish for each part. Requesting a mill‑test report for molybdenum wire and a hardness certificate for stainless‑steel nozzles helps verify compliance with industry standards. Sample orders of a single unit per part are advisable to confirm fit with the target machine model, especially for Makino wire guides and power feed contacts. Verify that the supplier can provide ISO 9001 certification or equivalent quality documentation, as this is routinely required by OEMs. Confirm packaging details such as anti‑static bagging for electrical components and palletized loading for bulk shipments to ensure safe delivery.

Minimum order quantities for specialized parts like jet nozzles are often set at 5‑10 pieces, but can be negotiated with a sample request. Lead times for custom‑size slide belts typically range from 10 to 20 working days after order confirmation. Buyers should clarify the Incoterm (e.g., FOB Shanghai) and arrange for freight insurance to cover potential loss during transport. Final acceptance usually involves a post‑delivery inspection report confirming that received dimensions and material certificates match the pre‑shipment documentation.

What types of products does Zhanyu Moulds & Hardware Accessories Co., Ltd. list in its catalogue?

The catalogue includes molybdenum wire, AWT slide belts, cutters, wave washers, jet nozzles, wire guides, power feed contacts and related hardware accessories identified by specific part numbers.

Are the listed jet nozzles compatible with specific machine brands?

Yes, several entries such as "For Makino of Jet Nozzle 23EC085A217" indicate compatibility with Makino machine models, while other items reference brands like Fanuc, Charmilles and Mitsubishi.

Which material specifications are typical for the molybdenum wire offered?

In the EDM market molybdenum wire is usually supplied with a purity of 99.5 % or higher and diameters between 0.1 mm and 0.5 mm, meeting ASTM B519 standards.

What documentation should a buyer request before purchasing slide belts or cutters?

Buyers should ask for a material certificate, tensile strength test report and a dimensional drawing that state tolerance (typically ±0.02 mm) and heat‑treatment condition.

What are the common HS code chapters for these hardware accessories?

Most of the items fall under HS Chapter 84 (machinery and parts) or Chapter 73 (iron and steel products), which are the standard classifications for CNC and agricultural hardware.

Which certifications are typically required for CNC accessories imported from China?

Importers usually require ISO 9001 quality‑management certification, CE marking for the EU, and RoHS compliance to verify restriction of hazardous substances.

What are the usual packaging and shipping methods for these components?

Components are generally packed in anti‑static bags or sealed boxes, grouped on pallets for sea freight, and shipped in 20‑ft or 40‑ft containers under FOB or CIF terms.