About Arlis Electric Products Co., Ltd. - Electric Circuit Breakers Supplier in Taiwan

Taiwan, located in East Asia, is the base of Arlis Electric Products Co., Ltd., which lists ten active products in its catalogue. The company’s offerings cover electric circuit breakers, leakage protection sockets and an automatic transfer switch. Products include a BH Type Circuit Breaker for wiring, an industrial wiring circuit breaker, a No‑Fuse Current Protector ACP, small earth‑leakage circuit breakers, leakage circuit breakers of BH type, leakage protection sockets (ASP series), an outdoor waterproof leakage protection breaker, a power automatic transfer switch (ATS), a Model 400AF circuit breaker and an embedded leakage protection socket (ASR). Each item falls under the electrical equipment category typically classified under HS Chapter 85. The catalogue reflects a focus on residential, commercial and industrial protection devices.

The listed items span low‑voltage protection functions such as over‑current interruption, residual‑current detection and automatic source switching. While the catalogue does not specify voltage or current ratings, the product names indicate suitability for standard domestic voltages (220‑240 V AC) and industrial ranges up to 400 V AC. The inclusion of both plug‑in sockets and panel‑mount breakers suggests compatibility with wiring systems that conform to IEC 60364. No explicit certifications are mentioned in the supplied data.

Product Range and Specialties of Arlis Electric Products Co., Ltd.

Arlis’s catalogue includes miniature circuit breakers (MCCB), residual‑current devices (RCD) and plug‑in leakage protection sockets. In the industry, MCCBs are commonly rated from 10 A to 630 A and comply with IEC 60947‑2, while RCDs for residential use typically meet IEC 61008 with trip currents of 30 mA to 300 mA. Leakage protection sockets such as the ASP series are usually designed for 16 A, 250 V applications and are tested to IEC 60884‑1 for safety. Buyers often look for specifications that list short‑circuit breaking capacity (kA), rated making and breaking capacity, and moisture resistance class IP20‑IP65 for outdoor units.

Trade and Export Information - Arlis Electric Products Co., Ltd.

Taiwanese manufacturers of low‑voltage electrical equipment frequently export under HS code 8535 for circuit breakers and 8536 for sockets. Main import markets include Southeast Asian countries, the European Union and North America, where building codes require IEC‑based compliance and CE or UL marking. Export shipments are typically packed in cardboard cartons with anti‑static lining, sized for 20‑ft or 40‑ft containers, and shipped under CIF or FOB terms. Taiwanese producers benefit from a well‑established supply chain for copper, plastic molding and stamping, and they often undergo pre‑shipment inspections by agencies such as SGS or Bureau Veritas to verify conformity with IEC standards.

Sourcing from Arlis Electric Products Co., Ltd. - Buyer Guidance

When sourcing circuit breakers or leakage protection sockets from Arlis, buyers should request the IEC test reports that confirm rated current, breaking capacity and IP protection level. Samples should be examined for compliance with IEC 60898 (miniature circuit breakers) or IEC 61008 (residual‑current devices) and for proper labeling of voltage, current and type designation. Verification of CE or UL certification, where required by the destination market, helps reduce customs delays, and buyers should also obtain a declaration of conformity and material safety data sheets for the plastic housings.

What product categories are listed in Arlis’s catalogue?

The catalogue contains ten items covering circuit breakers, leakage protection circuit breakers, leakage protection sockets and a power automatic transfer switch. Each product falls under the low‑voltage electrical equipment segment.

Are the circuit breakers suitable for industrial wiring?

The entry titled "Circuit Breaker for Industrial Wiring" indicates a design for higher‑current, higher‑voltage applications typical of industrial panels. Buyers should verify the short‑circuit breaking capacity and voltage rating against IEC 60947‑2 specifications.

Which standards apply to the leakage protection sockets?

Leakage protection sockets are generally evaluated against IEC 60884‑1 for safety and IEC 61008 for residual‑current performance. Buyers should ask for test reports that show the 30 mA or 300 mA trip current and the IP protection class.

What HS codes are relevant for these products?

Circuit breakers are normally classified under HS code 8535, while sockets and plugs fall under HS code 8536. These codes are used by customs authorities for tariff and statistical purposes.

How are the products packaged for export?

Export shipments are typically packed in reinforced cardboard boxes with anti‑static inserts, allowing safe stacking in 20‑ft or 40‑ft containers. The packaging meets ISO 15537 requirements for handling of electrical equipment.

What documentation should a buyer request before placing an order?

Buyers should request IEC test certificates, a declaration of conformity, and, if required by the destination market, CE or UL certification documents. Material safety data sheets for the plastic housings are also advisable.

What is the typical lead time for an order from Arlis?

Lead times for low‑voltage circuit breakers and sockets generally range from four to eight weeks, depending on order size and any required custom labeling. Buyers can confirm exact timelines during the quotation stage.

Can I obtain a sample of the automatic transfer switch (ATS)?

Arlis can provide a functional sample of the Power Automatic Transfer Switch for evaluation. The sample will be shipped in a standard protective crate and should be inspected for voltage rating, switching time and compliance with IEC 61727.