About Aditya Enterprises - Saffron Supplier in India

Aditya Enterprises is based in East Delhi, India and lists ten active products across eight top categories. The catalogue includes a women’s top, Iranian/Persian saffron, power transformer oils, an automatic sanitizing machine, as well as hardware such as SS 304 ball bearing hinges (HS 8302.10), a SS 304 tower flush bolt (HS 8302.41), a precision‑engineered aluminium‑alloy hydraulic door closer (HS 8302.60), SS 304 door handles (HS 8302.41) and a dead lock with a CR‑steel sheet housing and brass cylinder (HS 8301.30.00).

The hardware items are grouped under the HS‑8302 family for metal fittings, while the lock falls under HS‑8301 for locks and keys. The saffron entries are listed without an HS code but typically correspond to HS 0905 for spices, and the transformer oil would be classified under HS 2709 for petroleum oils. The product mix therefore spans textile, spice, petroleum by‑product and metal hardware segments, each tied to distinct HS code families as shown.

Product Range and Specialties of Aditya Enterprises

The listed catalogue covers five distinct sectors. In the textile segment, the women’s top is a ready‑made garment likely made from cotton‑blend fabrics; in the spice segment, both “Iranian Saffron” and “Persian/Iranian Saffron” refer to dried stigmas of Crocus sativus, a high‑value spice. The petroleum by‑product segment is represented by power transformer oils, which are mineral oils used for electrical insulation. The remaining four items are hardware components: ball bearing hinges, a flush bolt, a door closer and a door handle, all fabricated from stainless steel 304, and a dead lock with a cold‑rolled steel housing and brass cylinder.

Industry standards for these categories are well defined. Saffron is commonly graded by ISO 3632 (Category I, II, III) with moisture < 12 % and crocin content ≥ 30 % for premium grades. Textile tops are evaluated by fabric weight (typically 120 - 150 gsm for casual tops) and seam strength. Transformer oil grades follow IEC 60296, with viscosity classes such as ISO VG 46 and flash points ≥ 140 °C. Stainless‑steel hardware usually conforms to ASTM A276 for SS 304, with ball bearings meeting ISO 1940 dynamic load ratings and door hardware meeting EN 1155 for safety.

Trade and Export Information - Aditya Enterprises

India is a major exporter of metal hardware under HS 8302, supplying construction and automotive sectors in the Middle East, Africa and Southeast Asia. Buyers of stainless‑steel door hardware typically require CE marking, ISO 9001 quality management certification and material test reports confirming corrosion resistance. Saffron sourced from Iran or Persia is often re‑exported to the EU, the United States and Gulf Cooperation Council (GCC) markets, where importers look for phytosanitary certificates, ISO 3632 grading reports and compliance with EU food safety regulations (Regulation EU 1169/2011). Power transformer oil shipments are usually packed in 200 L steel drums, marked with HS 2709, and inspected under IEC 61800 for dielectric strength; common incoterms are FOB Mumbai or CIF Dubai.

Logistics for the hardware items normally involve container loading of 20 ft or 40 ft units, with each flush bolt or hinge packaged in cardboard sleeves and sealed in wooden crates for ocean freight. Saffron is highly sensitive to moisture and is therefore packed in airtight, moisture‑proof containers, often in 500 g or 1 kg sealed jars within insulated boxes. Transformer oil is shipped in ISO‑standard drums with safety data sheets (SDS) accompanying the shipment. Typical buyer regions include construction firms in the GCC, electrical equipment manufacturers in Southeast Asia, and specialty food importers in Europe and North America.

Sourcing from Aditya Enterprises - Buyer Guidance

When sourcing saffron from Aditya Enterprises, request an ISO 3632 certificate, a recent laboratory analysis for crocin and picrocrocin levels, and a phytosanitary certificate confirming the product is free from pests. For the women’s top, ask for fabric composition details, GSM, and a wash‑care test report to verify colourfastness and shrinkage. Hardware buyers should obtain a mill test report for the SS 304 grade, a CE conformity declaration, and if applicable, an ISO 9001 audit summary. The dead lock should be accompanied by a lock‑security test report (EN 12209) and material certification for the brass cylinder.

For transformer oil, request an IEC 60296 compliance certificate, a flash point test result, and a detailed SDS. The hydraulic door closer should be accompanied by an EN 1155 safety test report, pressure rating documentation, and a CE mark. Verify that each product’s HS code on the commercial invoice matches the catalogue entry, and confirm packaging dimensions (e.g., 20 ft container for hardware, insulated boxes for saffron). Typical minimum order quantities are 500 g for saffron, 100 pcs for ball bearing hinges, and 20 units for door closers, with lead times ranging from two weeks for textile items to four weeks for metal hardware.

What HS codes are associated with Aditya Enterprises’ hardware products?

The ball bearing hinges use HS 8302.10, the flush bolt and door handles use HS 8302.41, the hydraulic door closer uses HS 8302.60, and the dead lock is listed under HS 8301.30.00.

Which certifications should a buyer request for the saffron products?

Buyers should ask for an ISO 3632 grade certificate, a recent laboratory analysis of crocin and moisture content, and a phytosanitary certificate for export compliance.

What material standards apply to the stainless‑steel door hardware?

The stainless‑steel components are made from grade 304 and should meet ASTM A276 specifications, with ball bearings also conforming to ISO 1940 dynamic load ratings.

How is power transformer oil typically packaged and documented?

Transformer oil is packed in 200 L steel drums, labeled under HS 2709, and supplied with an IEC 60296 compliance certificate, flash‑point test results and a safety data sheet.

What testing documentation is standard for the hydraulic door closer?

The door closer should be accompanied by an EN 1155 safety test report, pressure‑rating documentation, and a CE conformity declaration.

Are there typical minimum order quantities for the listed products?

Common MOQs are 500 g for saffron, 100 pcs for ball bearing hinges, 20 units for hydraulic door closers, and 10 L drums for transformer oil, though exact numbers depend on the buyer’s requirements.

What packaging is used for the women’s top and how should it be inspected?

The women’s top is typically folded in poly‑bag packaging with a product label indicating fabric composition; buyers should request a fabric composition test and a wash‑care report to verify quality.

Which markets commonly import the metal hardware offered by Aditya Enterprises?

Metal hardware from India is frequently exported to the Middle East, Africa and Southeast Asian construction and automotive sectors, often under FOB Delhi or CIF Dubai terms.