About Taizhou Sanmen Anmax Electric Co., Ltd - Electric Ceiling Fans Supplier in China

China hosts Taizhou Sanmen Anmax Electric Co., Ltd, which currently lists six distinct electric fan models in its catalogue. The product lineup includes a Water Spray Fan (AM-650GT), Steam Cooling Fan (AM-650GH), Outdoor Cooling Fan (AM-650C), Wall Mist Fan (AM-650W), Air Cooler (AM-650GB), and a Mist Fan (AM-650GB) that is recorded under HS code 8414.51. All items fall under the broader HS chapter 84 that covers air moving devices. The supplier’s catalogue classifies these units as electric ceiling fans and related misting or cooling fans. The material description for the Mist Fan specifies an ABS housing, aluminum blades, and stainless‑steel misting nozzles.

Product Range and Specialties of Taizhou Sanmen Anmax Electric Co., Ltd

The catalogue presents six fan variants that combine conventional electric ceiling fan mechanisms with water‑based cooling or misting functions. Typical electric ceiling fans in this segment use single‑phase induction motors ranging from 45 W to 75 W, deliver airflow between 3,000 CFM and 5,500 CFM, and operate on 220‑240 V AC. For misting models, nozzle flow rates of 0.4 - 0.8 L min‑1 and droplet sizes of 20 - 30 µm are common, providing evaporative cooling while maintaining low water consumption. The Outdoor Cooling Fan is usually equipped with an IP44 or higher enclosure to protect against rain and dust, whereas wall‑mounted mist fans often use lightweight ABS housings for easy installation.

Trade and Export Information - Taizhou Sanmen Anmax Electric Co., Ltd

China is a global exporter of electric fans and misting equipment, with the majority of shipments classified under HS chapter 84, sub‑heading 8414.51 for fans with water distribution elements. Major import destinations include the United States, European Union, Middle East, and Southeast Asian markets, where residential, commercial, and hospitality sectors drive demand for evaporative cooling solutions. Buyers typically require compliance with CE marking for the EU, UL listing for the US, and IEC 60335‑2‑13 safety standards for fan appliances. Export packs are normally palletised on wooden pallets, placed in 20‑ft or 40‑ft containers, and shipped under FOB or CIF terms depending on the buyer’s preference.

Sourcing from Taizhou Sanmen Anmax Electric Co., Ltd - Buyer Guidance

When evaluating this supplier, request a full product data sheet that lists motor power, airflow, voltage, IP rating, and mist nozzle specifications. Ask for independent test reports such as CE Declaration of Conformity, UL file numbers, or IEC safety test certificates to confirm compliance with target market regulations. Verify the material composition of the ABS housing and stainless‑steel nozzles, especially if the misting system will use potable water. Typical minimum order quantities for fan appliances range from 100 to 500 units, with lead times of 30‑45 days after order confirmation, and packaging is usually in double‑wall cartons with inner polyfoam protection.

What product codes are listed in the catalogue?

The catalogue lists six models: Water Spray Fan (AM-650GT), Steam Cooling Fan (AM-650GH), Outdoor Cooling Fan (AM-650C), Wall Mist Fan (AM-650W), Air Cooler (AM-650GB) and Mist Fan (AM-650GB) with HS code 8414.51.

Which HS code applies to the Mist Fan?

The Mist Fan (AM-650GB) is recorded under HS code 8414.51, which covers fans that incorporate water distribution or misting elements.

What materials are used for the Mist Fan?

The Mist Fan uses an ABS housing, aluminum fan blades, and stainless‑steel misting nozzles, as specified in the supplied data.

Are any certifications mentioned for these fans?

No certifications are listed in the provided facts; buyers should request CE, UL, or IEC compliance documentation as appropriate for their market.

What are typical specifications buyers look for in electric ceiling fans?

Buyers usually check motor power (45‑75 W), airflow (3,000‑5,500 CFM), operating voltage (220‑240 V AC), blade material (aluminum or steel), and, for outdoor units, an IP44 or higher enclosure rating.

What packaging and shipping formats are standard for these fans?

Fans are commonly packed in double‑wall cartons with internal cushioning, placed on wooden pallets, and shipped in 20‑ft or 40‑ft containers under FOB or CIF Incoterms.

What documentation should a buyer request before placing an order?

A buyer should request a detailed product data sheet, motor efficiency test report, CE or UL conformity certificates, and material safety data sheets for the ABS housing and stainless‑steel nozzles.

What is a typical lead time and MOQ for fan orders from China?

Typical lead times are 30‑45 days after order confirmation, and minimum order quantities usually range from 100 to 500 units, depending on the specific model and buyer requirements.