About Long Turn International Consulting Group Co., Ltd. - Quartz Supplier in Taiwan

Taiwan‑based Long Turn International Consulting Group Co., Ltd. lists fourteen active products across mineral, metal and wood categories. The catalogue includes quartz ore and engineered quartz building material (HS 2506.10 and HS 6810.99), iron ore grades around 62 % Fe (HS 2601.11), ferrous scrap steel (HS 7204.49), copper scrap (HS 7404.00), steam coal, acacia and eucalyptus wood chips, and medical‑grade nitrile or latex gloves. Each entry is identified by its material type, such as natural quartz mineral SiO₂, HMS 1&2 grade steel scrap, or hematite iron ore certified by SGS at 62.25 % Fe.

The product list also references quartz lump with SiO₂ purity of 98‑99.5 %, quartz brick building material, and a combined “Quartz Building Material Edition”. Iron ore entries specify Fe content ranges of 62‑64.3 % and are described as hematite or magnetite sources. Steel scrap is noted as HMS 1&2, while copper scrap is presented without a fixed Cu grade, reflecting typical variability. The wood chip entries differentiate between acacia and eucalyptus sources, and the glove line includes both nitrile and latex options suitable for medical use.

Product Range and Specialties of Long Turn International Consulting Group Co., Ltd.

The quartz offerings span natural quartz ore, engineered quartz stone and high‑purity quartz lumps, all falling under HS 2506.10 or HS 6810.99. In international trade, industrial quartz is commonly graded by SiO₂ purity (typically 98‑99.5 %) and particle size, with specifications such as ASTM C615 for quartz sand or EN 12471 for engineered stone. Iron ore listed under HS 2601.11 is usually classified by Fe content; grades of 62‑64 % Fe are standard for blast‑furnace feed, and buyers often require assay reports and SGS or ISO certification. Ferrous scrap steel (HS 7204.49) in HMS 1&2 grade is defined by a minimum of 93 % Fe and limited contamination, while copper scrap (HS 7404.00) is commonly sorted into C1 (≥99 % Cu) and C2 (≥95 % Cu) grades. Steam coal, though not assigned an HS code in the catalogue, is typically traded under HS 2701 with calorific values of 5 000‑6 500 kcal/kg. Wood chips are exported under HS 4401, usually with moisture content below 20 % and particle length of 10‑30 mm. Medical gloves are subject to ASTM D6319 (nitrile) or ISO 11193‑1 (latex) standards, with thickness measured in mils and tensile strength specifications.

Trade and Export Information - Long Turn International Consulting Group Co., Ltd.

Taiwan exports mineral and metal commodities to East Asia, Southeast Asia and the broader Pacific Rim, with major importers including China, Japan, South Korea and Vietnam. Quartz and engineered stone are often shipped to construction and countertop manufacturers in the United States and Europe, where REACH compliance and silica dust safety data are routinely inspected. Iron ore and ferrous scrap from Taiwan are typically used by regional steel mills; customs for HS 2601 and HS 7204 frequently request SGS assay certificates and proof of non‑contamination. Copper scrap buyers in North America and the EU look for ISO 9001‑based quality management records and detailed Cu‑grade analysis. Steam coal shipments follow the standards of HS 2701, with buyers usually requiring moisture and ash content certificates and compliance with IMO sulfur limits. Wood chips are packaged in bulk bags or 20‑ft containers, and importers often ask for phytosanitary certificates under the ISPM 15 regime. Standard Incoterms such as FOB Kaohsiung or CIF Shanghai are common for these bulk commodities.

Sourcing from Long Turn International Consulting Group Co., Ltd. - Buyer Guidance

When sourcing quartz, request a recent assay report confirming SiO₂ purity (98‑99.5 %) and particle‑size distribution, as well as a Material Safety Data Sheet for silica dust handling. For iron ore, obtain the SGS certificate cited in the catalogue and verify Fe content against the 62‑64 % range; a secondary laboratory test can confirm consistency. Steel scrap buyers should ask for an HMS 1&2 compliance statement, iron loss and copper content analysis, and optionally an ISO 9001 audit report. Copper scrap purchasers need a grade‑specific Cu analysis (C1 or C2) and a melting point test. Wood chip importers typically request moisture content data (≤20 %) and a phytosanitary certificate confirming the source species (acacia or eucalyptus). Medical glove orders should be accompanied by an ASTM D6319 or ISO 11193‑1 test report, detailing tensile strength, puncture resistance and latex allergen content. Confirm packaging details - bulk bag dimensions for minerals, 20‑ft container loads for quartz and wood chips, and sealed poly‑bag packs for gloves - before finalizing the order.

What quartz products does Long Turn International Consulting Group Co., Ltd. offer?

The supplier lists natural quartz ore, engineered quartz stone for building applications, quartz bricks and high‑purity quartz lumps, all classified under HS 2506.10 or HS 6810.99 with SiO₂ purity between 98 % and 99.5 %.

Are the iron ore grades certified?

Yes. The iron ore entries cite an SGS certification showing Fe content of 62.25 % for the 62 % Fe grade, and the catalogue includes additional grades ranging from 62‑64.3 % Fe under HS 2601.11.

What standards should I request for the medical gloves?

Buyers usually request an ASTM D6319 test report for nitrile gloves or an ISO 11193‑1 report for latex gloves, covering tensile strength, puncture resistance and allergen testing.

Which steel scrap grade is supplied?

The steel scrap is described as HMS 1&2 grade under HS 7204.49, which typically requires a minimum of 93 % Fe and limits on copper and other contaminants.

What documentation is needed for copper scrap?

Typical documentation includes a detailed copper content analysis (grade C1 or C2), a melting point test, and any applicable ISO 9001 quality management certification.

How are wood chips packaged for export?

Wood chips are generally packed in bulk bags or 20‑ft containers, with moisture content usually below 20 % and accompanied by a phytosanitary certificate under ISPM 15.

What are the common Incoterms used for these commodities?

Exporters from Taiwan commonly use FOB Kaohsiung or CIF Shanghai for bulk mineral and metal shipments, while smaller packaged goods like gloves often use EXW or FCA terms.

Is a sample available for the quartz products?

Suppliers typically provide a small sample batch (e.g., 5‑10 kg) of quartz ore or engineered stone for laboratory testing before a full order is placed.