About Shree Ji Steel Corporation - Steel Bars Supplier in India

India hosts Shree Ji Steel Corporation, which lists seven distinct steel products in its online catalogue. The catalogue covers carbon‑steel bars, flat sections, angles, channels, beams and round bars, each tied to specific HS‑code families such as 7214.20 for TMT bars and 7216.10 for mild‑steel channels. The product titles use industry terms like “TMT Bar”, “MS Square Bar”, “MS Flat”, “MS Angle”, “MS Channel”, “MS Beam” and “MS Round Bar”. Materials are identified as carbon or mild steel, with grades such as S275JR, A36 or IS 2062 noted for the round bar and beam entries. The supplier’s trust tier is listed as “harbor”, indicating a mid‑level verification status on the platform.

The seven entries fall under the broader categories of Steel Bars, Stainless Steel Bars, Frames and Steel Sections, matching the supplier’s top‑category tags. HS codes are grouped in the 7214 and 7216 chapters, which cover bars, rods and other steel sections. No additional products beyond the seven listed are claimed, and no city or regional detail beyond the country of origin is provided.

Product Range and Specialties of Shree Ji Steel Corporation

Shree Ji Steel Corporation’s catalogue includes TMT bars (HS 7214.20, carbon steel), MS square bars and round bars (HS 7214.99, mild steel grades S275JR/A36/IS 2062), MS flat sections (HS 7214.90), MS angles (no HS code supplied), MS channels (HS 7216.10) and MS beams (HS 7216.31, S235/S275). In the Indian steel market, TMT bars are commonly produced to IS 1786 with yield strengths of 415 MPa or 500 MPa, while mild‑steel sections follow IS 2062 specifications for chemical composition and tensile properties. Typical dimensions range from 6 mm to 32 mm diameter for round bars and thicknesses of 4 mm to 25 mm for flat or angle sections. Buyers often request mill‑test reports that detail tensile strength, elongation and chemical analysis to verify compliance with these standards.

Industry practice for these product families includes offering grades such as Fe 415/Fe 500 for TMT bars, and hot‑rolled mild steel to ASTM A36 or EN 10025 for beams and channels. Stainless‑steel equivalents, though not listed, would normally be supplied in grades 304 or 316 with HS 7215 codes. Packing is usually in timber bundles or steel‑coated pallets, sized to fit 20‑ft or 40‑ft containers for overseas shipment.

Trade and Export Information - Shree Ji Steel Corporation

India ranks among the top global exporters of carbon‑steel bars and sections, with major destinations in the Middle East, Africa, Southeast Asia and parts of Europe. The HS‑code families 7214 and 7216 are routinely inspected under customs regimes that require a commercial invoice, packing list and a mill‑test report; many importers also ask for an ISO 9001 certificate or a CE declaration of conformity for downstream processing.

Typical export logistics involve loading bundled steel products onto 20‑ft or 40‑ft containers, with CIF or FOB terms most frequently used. Buyers often request compliance with the Indian Standards (IS) series, as well as any destination‑specific certifications such as ASTM or EN standards. Because the supplier’s catalogue does not list any specific certifications, importers should verify the presence of a valid ISO 9001 quality‑management system and request a recent mill‑test report before shipment.

Sourcing from Shree Ji Steel Corporation - Buyer Guidance

When sourcing from Shree Ji Steel Corporation, buyers should obtain a detailed mill‑test report for each product line, confirming tensile strength, yield point, chemical composition and dimensional tolerances. Because the catalogue does not include certification details, it is advisable to request copies of ISO 9001 or any other quality‑system certificates that the supplier may hold, as well as compliance statements with IS 1786 for TMT bars and IS 2062 for mild‑steel sections.

Buyers should also clarify packaging dimensions, container loading plans and the preferred Incoterm (FOB or CIF). Verifying the exact HS code on the commercial invoice prevents customs delays, and confirming the steel grade (e.g., S275JR, Fe 415) ensures the product meets the end‑use specifications.

What steel products does Shree Ji Steel Corporation list in its catalogue?

The catalogue lists seven products: TMT bar, MS square bar, MS flat, MS angle, MS channel, MS beam and MS round bar, each classified under HS 7214 or HS 7216 codes where provided.

Which HS codes are associated with the listed products?

TMT bar uses HS 7214.20, MS square bar and round bar use HS 7214.99, MS flat uses HS 7214.90, MS channel uses HS 7216.10 and MS beam uses HS 7216.31. No HS code is supplied for MS angle.

What material standards should I expect for the mild‑steel products?

Mild‑steel items are described as carbon or low‑carbon steel, typically conforming to Indian standards such as IS 2062 for bars and sections, with grades like S275JR, A36 or S235 for beams.

Are there any certifications mentioned for Shree Ji Steel Corporation?

The supplied facts do not list any certifications; buyers should request ISO 9001 or relevant mill‑test certificates to verify product quality.

What typical grades are used for TMT bars exported from India?

Indian exporters usually produce TMT bars to IS 1786, commonly in Fe 415 or Fe 500 grades, which correspond to the HS 7214.20 classification.

What packaging and container sizes are common for these steel products?

Steel bars and sections are normally bundled on timber or steel‑coated pallets and shipped in standard 20‑ft or 40‑ft containers, with dimensions designed to maximize load efficiency.

Which markets typically import Indian steel bars and sections?

Key import markets include countries in the Middle East, Africa, Southeast Asia and parts of Europe, where construction and manufacturing sectors demand carbon‑steel products.

What documentation should I request before placing an order?

Buyers should ask for a commercial invoice, packing list, mill‑test report for each product, and any quality‑system certificates such as ISO 9001, as well as confirmation of the correct HS code on the invoice.