About Kobe Steel India - Metal Products Supplier in India

India hosts Kobe Steel India, which lists 24 distinct metal product entries in its catalogue. The catalogue covers a range of steel and aluminum components such as stainless steel pipes, carbon steel flanges, steel wire, and various bars and tubes. Products are grouped under categories like Flanges, Steel Scrap, Aluminum Pipes, Steel Wires, Stainless Steel Bars, Iron Rods, Metallic Elements, and Steel Sections. Each entry corresponds to standard HS code chapters for metal products, for example chapter 73 for iron and steel articles and chapter 76 for aluminum articles. The supplier’s imported tier status indicates it sources these items for resale to international buyers.

The listed items include stainless steel round pipe, duplex steel pipes, carbon steel pipes, ERW tube, galvanized steel tubes, aluminium tubes, and specialty alloys such as Monel and Inconel. Additional offerings cover steel billets, angles, sections, and both carbon and stainless steel flanges. By providing both raw forms (scrap, billets) and finished components (pipes, bars, tubes), the catalogue addresses multiple stages of the metal processing supply chain. Buyers can therefore source from a single supplier for diversified metal product needs. The catalogue does not specify individual HS codes, but each product aligns with the relevant HS sections for its material type.

Product Range and Specialties of Kobe Steel India

The catalogue’s stainless steel pipe line typically follows ASTM A312 with grades 304, 304L, 316 and 316L, wall thickness from 2 mm to 30 mm and diameters up to DN 1200. Aluminum pipes are commonly supplied in alloy 6061‑T6 or 6063‑T5, with outside diameters ranging 15 mm to 600 mm and wall thicknesses 1 mm to 20 mm, matching EN 573 standards. Steel flanges listed under carbon and alloy categories usually conform to ASTM A182 (Class 150, 300, 600) and EN 1092‑1, offering bolt circle diameters from M12 to M48.

Steel wire products are generally supplied in tensile strengths of 400 - 800 MPa and diameters from 2 mm to 20 mm, complying with IS 492. High‑strength steel bars and stainless steel bars are often graded to ASTM A572 (Grade 50) and ASTM A240 respectively, with lengths of 6 m per bar and surface finish options of hot‑rolled or cold‑drawn. Tubular products such as ERW tube, galvanized steel tube and aluminium tube are fabricated to ASTM A53/A53M, ASTM A123 (galvanized) and ISO 6361, with standard packing in 20‑ft containers, roughly 1,200 kg per container for steel tubes.

Trade and Export Information - Kobe Steel India

India ranks among the top global exporters of steel and aluminium, with the majority of pipe, flange and wire shipments destined for the Middle East, East Africa, Southeast Asia and European Union markets. The HS chapters most relevant to Kobe Steel India’s catalogue are 7308 (flanges and fittings), 7309 (pipes and tubes of iron or steel), 7208 (aluminium tubes and pipes) and 7204 (scrap metal). Buyers in the construction, oil‑and‑gas, shipbuilding and automotive sectors regularly request ISO 9001 quality management certification, ASTM or EN compliance certificates, and mill test reports for these products.

Typical export logistics from India involve FOB loading at ports such as Mumbai or Chennai, with containerised shipments on 20‑ft or 40‑ft boxes. Steel billets, bars and scrap are often loaded in bulk on open‑top containers or bundled on pallets, while tubes and pipes are crated to prevent deformation. Import‑regulating bodies in the destination countries may require a Certificate of Origin, an Inspection Certificate from the Indian Export Inspection Council, and compliance with REACH (for EU) or GCC standards (for Gulf).

Sourcing from Kobe Steel India - Buyer Guidance

When sourcing stainless steel pipes from Kobe Steel India, buyers should request the mill test certificate showing chemical composition per ASTM A312, as well as a dimensional inspection report confirming wall‑thickness tolerance of ±0.2 mm. For aluminum tubes, a certification to EN 573‑3 and a tensile test result of at least 310 MPa are standard verification points. Samples of each pipe size are usually supplied in a 1‑piece or 5‑piece set before full order confirmation.

Typical minimum order quantities range from one 20‑ft container (approximately 1,200 kg of steel tubes) to batch sizes of 5 tons for steel scrap, depending on product form. Lead times reported by Indian exporters are 30 - 45 days for standard dimensions, extending to 60 days for custom‑alloy grades such as Monel or Inconel. Packaging is generally in wooden crates or steel pallets, with moisture‑resistant liners for corrosion‑sensitive items.

What product categories does Kobe Steel India list?

The supplier lists 24 items covering stainless steel pipes, carbon steel flanges, aluminum pipes, steel wire, various steel bars, billets, angles, sections, specialty alloys such as Monel and Inconel, as well as steel scrap.

Which international standards apply to the stainless steel pipe range?

Stainless steel pipes are commonly manufactured to ASTM A312 (grades 304, 304L, 316, 316L) and EN 10220, with pressure ratings up to 16 MPa and diameters up to DN 1200.

What certifications should a buyer request for the flanges?

Buyers should ask for mill test certificates referencing ASTM A182 or EN 1092‑1, and a copy of the supplier’s ISO 9001 quality management certificate.

How are the tubes typically packaged for export?

Tubes are crated in wooden boxes with internal padding, stacked on pallets, and loaded into 20‑ft or 40‑ft containers; galvanized steel tubes may receive additional corrosion‑protective coating.

What are the typical minimum order quantities (MOQ) and lead times?

MOQs are generally one 20‑ft container (≈1,200 kg) for tubes or bars, and 5 tons for steel scrap; standard lead time is 30 - 45 days, extending to 60 days for custom alloys.

Which documents are required for customs clearance in the EU?

EU customs typically require a Certificate of Origin, an Inspection Certificate from the Indian Export Inspection Council, a REACH compliance declaration, and the mill test report for the specific product.

Can I obtain a sample before placing a full order?

The supplier can provide a single‑piece or small batch sample of pipes, bars or tubes after a nominal handling fee, with shipping arranged on a DAP basis.