About Ravi Brass Industries - Brassware Supplier in India

India, with a catalogue of five distinct brass components, Ravi Brass Industries lists products under the categories Electric Terminals, Electric Connectors and Brassware. The catalogue includes Brass Pins, Brass Hollow Pin With Brass Sheet, Hollow Pin, Brass European Pin, and Brass 3‑Pin Insert. The Brass 3‑Pin Insert is recorded under HS Chapter 85, code 8536.69 and is manufactured from a brass alloy identified as CuZn37 / Cu60Zn40. The other four items are described without HS codes but fall within the same HS family for electrical fittings.

The listed items cover standard pin configurations used in connector assemblies and terminal blocks. Brass Pins and Brass European Pin are typical cylindrical pins sized from 2 mm to 6 mm in diameter, while the Brass Hollow Pin With Brass Sheet combines a hollow core with a sheet backing for spring‑loaded contacts. The generic Hollow Pin is offered as a bare brass rod. Together these five SKUs represent the supplier’s current active product count.

Product Range and Specialties of Ravi Brass Industries

Ravi Brass Industries offers five brass components, each intended for electrical connection applications. The Brass 3‑Pin Insert, classified under HS 8536.69, is produced from a CuZn37 (C26000) alloy that provides a balance of conductivity (≈28 % IACS) and mechanical strength. In the broader market, brass pins for terminals are commonly supplied in grades C26000, C26800, or C27200, with tolerances of ±0.05 mm on diameter and a typical hardness of 80 - 100 HB. Standard specifications such as IEC 60204 for equipment wiring or IEC 60950 for IT equipment often reference these grades. Packaging for such pins is usually in cardboard cartons containing 1 000 - 5 000 pieces, with protective polymer sleeves for corrosion resistance.

The Brass Hollow Pin With Brass Sheet and Brass European Pin follow similar material standards, using the same CuZn37 alloy or equivalent brass alloys with a copper content of 60 % and zinc 40 %. Buyers in the electronics and automotive sectors frequently request material test certificates confirming alloy composition, mechanical tensile strength (≈300 MPa), and compliance with RoHS limits for lead and cadmium. The generic Brass Pins and Hollow Pin are supplied as raw rods or pre‑drilled pins, often meeting the dimensional tolerances required for insertion into standard DIN 73300 terminal blocks.

Trade and Export Information - Ravi Brass Industries

India is a major exporter of brass electrical components, with the majority of shipments destined for Asia‑Pacific (China, Vietnam, Thailand), Europe (Germany, United Kingdom) and North America (United States, Mexico). Products classified under HS 8536.69 are subject to customs checks for conformity with electrical safety regulations, and buyers typically require CE marking or UL certification for end‑use in regulated markets. Common Incoterms used by Indian brass suppliers include FOB Mumbai or CIF Shanghai, with bulk shipments in 20‑ft containers holding up to 12 metric tonnes of brass pins, depending on packaging density.

The export process often involves pre‑shipment inspection under the framework of the Indian Export Inspection Council (IEIC) or third‑party agencies such as SGS, focusing on alloy composition, dimensional accuracy and surface finish (typically ≤0.8 µm Ra). Documentation generally includes a commercial invoice, packing list, certificate of origin and, where requested, a material test report complying with ISO 9001 quality management standards. Buyers importing these components for automotive wiring harnesses or consumer electronics should verify that the supplier can provide RoHS compliance statements and, if applicable, IEC 60529 IP rating for any protective housings.

Sourcing from Ravi Brass Industries - Buyer Guidance

When sourcing brass pins from Ravi Brass Industries, buyers should request a material test report that details the exact CuZn composition, tensile strength and hardness. Confirmation of compliance with RoHS (lead ≤0.1 %, cadmium ≤0.01 %) and, where required, IEC standards for terminal blocks will help validate suitability for electronic assemblies. Samples of the Brass 3‑Pin Insert and other pin types should be inspected for dimensional tolerance (±0.05 mm) and surface finish before confirming bulk orders.

Potential buyers should also clarify packaging preferences - whether bulk bagging, cardboard cartons or anti‑corrosion wrapping - as this impacts container loading and freight calculations. Typical minimum order quantities for brass pin inserts range from 5 000 to 10 000 pieces, with lead times of 30 - 45 days from order confirmation, subject to alloy availability. Prior to finalising the purchase, verify the supplier’s ability to provide the required certificates (ISO 9001, CE, UL) and any third‑party inspection reports.

What product codes and HS classifications does Ravi Brass Industries list for its brass pins?

The catalogue specifies an HS code of 8536.69 for the Brass 3‑Pin Insert; the other four pin types are listed without explicit HS codes but fall under the same HS Chapter 85 family for electrical fittings.

Which alloy composition is used for the Brass 3‑Pin Insert?

The Brass 3‑Pin Insert is manufactured from a brass alloy identified as CuZn37 / Cu60Zn40, a common C26000 grade.

What certifications should a buyer request for these electrical brass components?

Buyers should ask for an ISO 9001 quality‑management certificate, RoHS compliance documentation, and where required, CE or UL certification for electrical safety.

What are typical packaging options and container capacity for brass pins?

Standard packaging is in cardboard cartons of 1 000 - 5 000 pieces, optionally placed in bulk bags; a 20‑ft container can accommodate up to about 12 tonnes of such pins depending on packing density.

What quality tests are commonly performed on brass pins before export?

Typical tests include material composition analysis, tensile strength testing (≈300 MPa), hardness measurement (80 - 100 HB), and dimensional tolerance checks (±0.05 mm).

What is the usual lead time and minimum order quantity for the Brass 3‑Pin Insert?

Lead time is generally 30 - 45 days from order confirmation, with a minimum order quantity of 5 000 to 10 000 pieces.

Which markets typically import brass electrical components from India?

Key import markets include the Asia‑Pacific region (China, Vietnam, Thailand), Europe (Germany, United Kingdom) and North America (United States, Mexico).

What Incoterms are commonly used for shipping these items?

Suppliers in India frequently use FOB Mumbai or CIF Shanghai as the preferred Incoterms for brass pin shipments.