About Ztudio11 Ltd - Bathroom and Shower Accessories Supplier in the United Kingdom

Ztudio11 Ltd is a United Kingdom-based supplier listing 25 active products across bathroom fittings, shower components, and related accessories. The catalogue is concentrated in HS code 8481.80 (taps, cocks, valves and similar appliances), which accounts for the majority of items, particularly shower heads in chrome-plated brass, ABS, and stainless steel variants such as the Gommosa 5G, Elite Chrome Oro, Gae 1G Cromo, Micra 4G Cro, Mary 2G, Stefy 2G, and Alida 1G Cromo. Additional HS families present in the range include 3922.90 (toilet seats and resin shower trays), 3924.90 (WC seat kits in polypropylene), 8302.41 (base-metal mountings and fittings), 6903.20 and 6907.22 (refractory and porcelain ceramic goods), 7324.90 (stainless steel arms), 7418.20 and 7419.99 (copper-alloy household articles), 7804.11 (lead sheets), 3917.32 (flexible plastic tubing), and 7318.15 (zinc-plated fixings). The product mix covers shower heads, sliders, flexible hoses, WC seats, toilet seat hardware, a stainless steel 304 kitchen mixer, resin shower trays, a drop sink, and a ceramic slab, with materials spanning chrome-plated brass (CuZn alloy), stainless steel 304, ABS plastic, polypropylene, HDPE, thermoset urea-formaldehyde, porcelain ceramic, and resin composite. The catalogue reflects a multi-category bathroom and plumbing assortment rather than a single specialised line, with brass and ABS shower heads forming the largest group at 9 of the 25 listed items.

Product Range and Specialties of Ztudio11 Ltd

The catalogue at Ztudio11 Ltd spans 25 active SKUs grouped into eight top categories: Shower Accessories, Bathroom Accessories, Soap Dispenser, Sinks/Washbasins/Countertops, Showers, Water Meter, Ceramic Cartridge, and PP Woven Bag. Shower heads dominate the listing and are offered in chrome-plated brass, stainless steel 304, and ABS with chrome finish, with jet configurations ranging from 1-function (Gae 1G, Kim 1G, Alida 1G) through 2-function (Mary 2G, Stefy 2G) to 4-function and 5-function (Micra 4G Cro, Gommosa 5G). The WC seat range includes a Kit X WC Seat in polypropylene (HS 3924.90), a thermoset UF urea-formaldehyde seat with a stated 3,000-piece minimum, and a Fix and Screws kit in zinc-plated steel with ABS (HS 7318.15). In the broader bathroom fittings trade, brass shower heads in this segment are commonly specified to CuZn39Pb3 (CW614N) or CuZn40Pb2 (CW617N) with EN 248 chrome plating at 0.2 to 0.3 microns, and ABS heads typically use acrylonitrile butadiene styrene with a nickel-chrome electroplated layer of 8 to 12 microns. WC seats in thermoset UF are rated for higher heat resistance (typically to 110 degrees C) than polypropylene seats (to 80 degrees C), and resin shower trays are commonly produced from a mixture of natural mineral filler (calcium carbonate or aluminium trihydrate) and polyester or acrylic resin, cast in stone-resin or gelcoat finishes. Buyers sourcing this category typically see 1/2 inch BSP connections as standard, flow rates of 6 to 12 litres per minute at 3 bar, and pressure ratings up to 5 bar for domestic brass mixer sets.

Trade and Export Information - Ztudio11 Ltd

Bathroom fittings and shower accessories under HS chapters 3917 (plastic tubes), 3922/3924 (plastic sanitary ware), 6903/6907 (ceramic goods), 7324 (stainless steel articles), 7418/7419 (copper articles), 7804 (lead), 8302 (base-metal fittings), and 8481 (taps and valves) flow heavily into construction and hospitality supply chains in the EU, the Gulf Cooperation Council states (UAE, Saudi Arabia, Qatar), North Africa, and Sub-Saharan Africa. The United Kingdom is a net importer of finished bathroom fittings and re-exports a portion through distributors serving both domestic renovation markets and Commonwealth trade corridors; UK-origin sanitary ware typically ships under FOB, CFR, or CIF Incoterms in 20 ft and 40 ft containers, with shower heads packed in individual polybags and inner cartons of 6 to 24 pieces. For this product group, buyers in the EU and Gulf markets commonly require CE marking under the Construction Products Regulation (EU 305/2011) where applicable, EN 1112 and EN 1113 compliance for shower outlets and hoses, EN 817 for single-handle mixers, EN 200 for pillar taps, and WRAS or KIWA approval for products contacting potable water. Lead-content compliance under REACH (EU) and the U.S. Safe Drinking Water Act (SDWA) section 1417 limits brass alloys to a weighted lead content of 0.25 percent for potable components, which is why CW617N and CW614N with dezincification resistance (DZR) are preferred. Documentation typically requested includes mill test certificates for brass and stainless steel, salt-spray test reports (ASTM B117, typically 48 to 200 hours for chrome finishes), certificates of conformity, and pre-shipment inspection reports from SGS, Bureau Veritas, or Intertek.

Sourcing from Ztudio11 Ltd - Buyer Guidance

Buyers approaching Ztudio11 Ltd should request the full technical data sheet for each shower head or fitting, including the brass alloy grade (CW617N or CW614N preferred), chrome plating thickness in microns, salt-spray test hours, and the country of manufacture, since the supplier is UK-registered but the catalogue includes product names suggesting Italian or Mediterranean sourcing. Confirm the exact HS code per line item against the catalogue (8481.80 for the majority of shower heads, 3922.90 for the WC seat and resin trays, 3924.90 for the PP WC seat kit, 8302.41 for sliders and mountings, 7324.90 for the stainless steel arm, 7418.20 for the Kim 1G shower head, 7419.99 for the Biflex shower kit, 7804.11 for the lead sink drop, 6903.20 for the Bianco/Cro slider, 6907.22 for the Ballet Slab, 3917.32 for the Spiroflex hose, 7318.15 for the toilet seat fixings, and 3926.90 for the flexible extendable hose). Before placing an order, buyers should request pre-production samples for fit, finish, and flow-rate verification at 0.5, 1, 3, and 5 bar, and ask for third-party test reports covering EN 1112, EN 1113, EN 817, REACH compliance for brass alloy lead leaching, and ASTM B117 salt-spray results. Confirm packaging specifications (polybag + inner carton + export carton), the MOQ of 3,000 pieces flagged on the thermoset WC seat line, and lead times in writing, since bathroom fittings with chrome plating typically carry 30 to 60 day production cycles plus 21 to 35 days for sea freight from European or Mediterranean ports to Gulf, West African, or East African destinations. Verify any water-contact certifications (WRAS, KIWA, ACS) directly with the issuing body before shipment, as these are commonly required for UK and EU re-export into regulated potable-water markets.

What product categories does Ztudio11 Ltd supply?

The supplier lists 25 active products across Shower Accessories, Bathroom Accessories, Soap Dispensers, Sinks and Washbasins, Showers, Water Meters, Ceramic Cartridges, and PP Woven Bags. The catalogue is dominated by shower heads under HS 8481.80, with supporting lines in WC seats, resin shower trays, flexible hoses, and stainless steel fittings.

Which HS code applies to the shower heads in the catalogue?

The majority of shower heads (Gommosa 5G, Elite Chrome Oro, Gae 1G Cromo, Micra 4G Cro, Mary 2G, Stefy 2G, Alida 1G Cromo, and the Angy) are classified under HS 8481.80 (taps, cocks, valves and similar appliances). The Kim 1G Cromo shower head is listed separately under HS 7418.20 (copper alloy household articles).

What is the minimum order quantity for the thermoset WC seat?

The catalogue lists a minimum of 3,000 pieces for the thermoset urea-formaldehyde WC seat under HS 3922.90. Other lines such as the Kit X WC Seat in polypropylene (HS 3924.90) do not have a stated MOQ in the catalogue and should be confirmed directly.

Which certifications should buyers request for bathroom fittings from this supplier?

Buyers should request EN 1112 (shower outlets), EN 1113 (shower hoses), EN 817 (single-handle mixers), REACH compliance for brass lead content (max 0.25 percent weighted average for potable use), and ASTM B117 salt-spray test reports for chrome plating. For UK, EU, and Gulf potable-water markets, WRAS, KIWA, or ACS approvals are commonly required and should be verified with the issuing body.

What materials are used in the shower heads listed?

The shower heads are offered in three main material constructions: chrome-plated brass (CuZn alloy) with stainless steel components, ABS plastic with chrome plating, and stainless steel 304. Brass variants are typically CW617N or CW614N with EN 248 chrome plating, while ABS heads use nickel-chrome electroplated finishes.

What packaging and shipping options are typical for this category?

Shower heads and bathroom fittings in this segment are typically packed in individual polybags, inner cartons of 6 to 24 pieces, and export cartons on pallets. Sea freight is standard under FOB, CFR, or CIF Incoterms in 20 ft (around 18 to 22 cubic metres usable) or 40 ft containers, with production lead times of 30 to 60 days plus 21 to 35 days transit from European or Mediterranean ports.

Which documents should accompany a shipment of these goods?

Buyers should request a commercial invoice, packing list, certificate of origin, mill test certificates for brass and stainless steel, REACH and RoHS compliance statements where applicable, CE marking documentation for the EU, WRAS or KIWA certificates for potable-water lines, and a pre-shipment inspection report from SGS, Bureau Veritas, or Intertek.

Which regions typically import UK-sourced bathroom fittings?

UK and EU-origin bathroom fittings commonly flow into Gulf Cooperation Council markets (UAE, Saudi Arabia, Qatar, Kuwait), North Africa (Egypt, Morocco, Tunisia), Sub-Saharan Africa (Nigeria, Kenya, Ghana), and Commonwealth trade corridors. These regions typically require potable-water certifications, EN-standard compliance, and pre-shipment inspection as standard procurement conditions.