About Guangzhou Xuntian New Energy Co., Ltd - Batteries & Chargers Supplier in China

Guangzhou Xuntian New Energy Co., Ltd operates out of Guangzhou, China and currently lists 23 active battery products. The catalogue spans several top categories including Batteries & Chargers, Industrial Batteries, Solar Batteries, Power Plant Spares and UPS systems. Products range from lithium‑ion LiFePO4 modules such as 51.2 V 300 Ah floor‑mounted units to sealed lead‑acid AGM and gel batteries for solar and industrial deep‑cycle applications. Several items are classified under HS chapter 85, specifically HS code 8507.60 for lithium‑ion batteries, while the lead‑acid series fall under the broader HS 8507 heading. The supplier’s portfolio covers both wall‑mounted and floor‑mounted formats, as well as specialized power‑supply units like a 12 V 7 Ah UPS backup battery.

Product Range and Specialties of Guangzhou Xuntian New Energy Co., Ltd

The supplier’s lithium‑ion line focuses on LiFePO4 chemistry, which is widely accepted for solar‑storage and UPS applications because of its thermal stability and cycle life exceeding 2000 cycles. In the market, LiFePO4 modules are typically supplied in IEC 62133‑compliant packs with a nominal voltage of 3.2 V per cell, and export specifications often require UN 38.3 test certification and a capacity tolerance of ±5 %. Lead‑acid offerings include AGM, gel and tubular plate types; industry standards such as IEC 60896‑1 for stationary batteries and IEC 60896‑2 for deep‑cycle use are common. Typical grade descriptors for AGM batteries are 12 V 200 Ah with a reserve capacity of 120 minutes, while gel batteries are frequently specified at 2 V 800 Ah with a high‑temperature tolerance up to 55 °C. Packaging is usually in wooden crates for 12‑V units or steel containers for larger 51.2‑V floor‑mounted packs, allowing 20‑ft containers to hold up to 12‑15 floor‑mounted batteries depending on dimensions.

Trade and Export Information - Guangzhou Xuntian New Energy Co., Ltd

Chinese battery manufacturers export LiFePO4 and lead‑acid products primarily to Europe, North America, the Middle East and Southeast Asia, where renewable‑energy projects and data‑center UPS systems drive demand. HS 8507.60 is the internationally recognized code for lithium‑ion batteries, and customs authorities in the EU and US often request test reports confirming compliance with IEC 62133 and UN 38.3, as well as a certificate of origin. Lead‑acid batteries fall under HS 8507 xx and may require documentation of hazardous‑material handling, including a safety data sheet (SDS) and compliance with the International Maritime Dangerous Goods (IMDG) Code for transport.

Typical incoterms for these shipments are FOB Guangzhou or CIF destination port, with containers packed in insulated wooden boxes to protect against temperature excursions. Exporters from China frequently work with third‑party inspection agencies such as SGS or Intertek to provide pre‑shipment inspection reports covering dimensions, weight, voltage, capacity and visual defects. Buyers often request a Declaration of Conformity and, for large‑scale solar projects, a performance guarantee covering 80 % of rated capacity after 500 cycles.

Sourcing from Guangzhou Xuntian New Energy Co., Ltd - Buyer Guidance

When sourcing LiFePO4 batteries from this supplier, request the latest IEC 62133 test certificate, UN 38.3 shipment test, and a third‑party capacity test report that shows the actual Ah at 25 °C. Verify the nominal voltage, cell count and packaging dimensions against your system design, and confirm that the battery management system (BMS) includes over‑charge, over‑discharge and temperature protection. For lead‑acid units, ask for IEC 60896‑1 compliance documentation, an SDS, and a warranty statement covering at least 12 months for AGM and gel types.

Samples of a representative cell or a small‑capacity module can be used to validate performance before committing to a full container. Check the weight per unit to calculate container loading - a 51.2 V 300 Ah LiFePO4 pack typically weighs around 180 kg, allowing roughly 12‑14 units in a 40‑ft container. Confirm lead times, which for standard AGM and gel batteries range from 30 to 45 days, while custom‑spec LiFePO4 packs may require 60 days.

What voltage and capacity options are available for LiFePO4 batteries?

The catalogue lists 25.6 V 100 Ah, 51.2 V 100 Ah, 51.2 V 200 Ah, 51.2 V 300 Ah and 51.2 V 400 Ah models, offered as both wall‑mounted and floor‑mounted units, all using lithium iron phosphate cathode chemistry.

Which HS code applies to the lithium‑ion batteries?

Items identified with lithium iron phosphate chemistry are classified under HS code 8507.60, the standard code for rechargeable lithium‑ion batteries.

Are the lead‑acid batteries suitable for solar‑energy storage?

The supplier offers AGM 12 V 200 Ah, gel 12 V 100 Ah, tubular plate 2 V 250 Ah and gel 2 V 800 Ah batteries, which are commonly used in solar and off‑grid applications because of their deep‑cycle capability and stable discharge characteristics.

What certifications should a buyer request for these batteries?

Buyers should request IEC 62133 and UN 38.3 certificates for LiFePO4 units, IEC 60896 compliance for stationary lead‑acid batteries, and a safety data sheet (SDS) for any hazardous‑material handling.

What is the typical packaging for the 51.2 V floor‑mounted batteries?

Floor‑mounted packs are usually shipped in insulated wooden crates or steel containers sized to fit standard 20‑ft or 40‑ft containers, with each unit weighing around 180 kg.

What are the common lead times for the listed products?

Standard AGM and gel batteries have lead times of 30‑45 days, while larger LiFePO4 modules, especially custom wall‑mounted versions, may require up to 60 days.

Which markets does Guangzhou Xuntian New Energy primarily export to?

While specific destinations are not listed, Chinese battery exporters typically serve Europe, North America, the Middle East and Southeast Asia.

How can a buyer obtain a sample before a full order?

The supplier can provide a low‑capacity LiFePO4 cell or a single 12 V 100 Ah AGM unit for performance testing, subject to a nominal sample fee and shipment under the buyer’s chosen incoterm.