About Geco Industrial Co. Ltd. - Other - Fabric and Raw Material Supplier in South Korea (Republic Of Korea)

Geco Industrial Co. Ltd. is based in South Korea (Republic of Korea) and currently lists seven active products. Its catalogue spans the geosynthetic segment within the broader categories of Fabric and Raw Material, Construction Materials and related industrial applications. The product list includes Vertical Wick Drain Board (PVD), Prefabricated Vertical Drain, Prefabricated Vertical Drain (wick drain, PVD), Geostrap polymeric strap for MSE wall panel, Geostrip polymeric strip, retaining wall (MSE wall, polymeric strip) and Polymeric Strip for Retaining Wall, which is recorded under HS code 5603.12 and described as a polypropylene/polyester geosynthetic polymer. The supplier’s offerings are grouped under HS chapter 56, covering textile and fabric products, specifically the sub‑heading for geosynthetic strips.

The seven items cover both drainage solutions such as vertical wick drains and structural reinforcement products like polymeric strips and straps used in mechanically stabilized earth (MSE) walls. While most entries lack explicit HS codes in the source data, one product is identified with HS code 5603.12, indicating a polypropylene or polyester geosynthetic polymer. The catalogue reflects a focus on polymer‑based geosynthetics for civil engineering and agricultural infrastructure.

Product Range and Specialties of Geco Industrial Co. Ltd.

Geco’s catalogue presents a set of polymer‑based geosynthetics: vertical wick drain boards and prefabricated vertical drains for subsurface drainage, and polymeric straps and strips for retaining‑wall and MSE applications. In the industry, vertical wick drains are typically supplied as HDPE or PP geocomposites with a drainage capacity of 1,200 L m⁻²·h⁻¹, aperture sizes around 0.5 mm, tensile strength of 30 kN m⁻¹ and elongation of 15‑20 %. Polymeric strips for retaining walls usually conform to ASTM D4439 or EN 13252, with thicknesses of 1.0‑3.0 mm, widths up to 3 000 mm, tensile strengths of 200‑500 kN m⁻¹ and UV‑stabilised formulations. The polymeric strap for MSE panels is commonly manufactured from blended polypropylene and polyester fibers, meeting ISO 10723 requirements for geosynthetic reinforcement. Typical grades are identified by the material type (PP, PET) and by performance class (e.g., Class A for high‑strength applications).

Trade and Export Information - Geco Industrial Co. Ltd.

South Korea is a notable exporter of geosynthetic products, with major import markets in Southeast Asia, the Middle East, Africa and South America. Products classified under HS code 5603.12 are subject to standard customs documentation and, for EU destinations, may require CE marking in addition to ISO 9001 quality‑management certification. Buyers typically request test reports that reference ASTM D4439, EN 13252 or ISO 10723, and may also need ISO 14001 environmental certification depending on local regulations. Shipping is usually performed on rolled cores packed in wooden crates or bulk‑plastic drums, loaded into 20‑foot or 40‑foot containers; FOB Busan is a common term for South Korean exporters, with CIF options available for overseas buyers. The polymeric strip’s polypropylene/polyester composition aligns with the material specifications commonly accepted in international civil‑engineering projects, and the product’s HS chapter 56 classification facilitates streamlined tariff treatment under many free‑trade agreements that South Korea maintains.

Sourcing from Geco Industrial Co. Ltd. - Buyer Guidance

When sourcing from Geco, buyers should request a product data sheet that details material composition (PP/PET blend), tensile strength, elongation, drainage coefficient and UV‑resistance test results. Verify that the supplied test reports reference the relevant standards (ASTM D4439, EN 13252 or ISO 10723) and ask for ISO 9001 certification if quality‑management assurance is required for the project. Typical minimum order quantities for geosynthetic strips are expressed in rolls; a practical MOQ is five rolls (approximately 5 000 m) depending on width and thickness, with lead times of four to six weeks after order confirmation. Samples are generally provided on a rolled basis and shipped in a small pallet, allowing the buyer to perform on‑site verification before committing to larger volumes.

What geosynthetic products does Geco Industrial Co. Ltd. list in its catalogue?

The catalogue includes Vertical Wick Drain Board (PVD), Prefabricated Vertical Drain, Prefabricated Vertical Drain (wick drain, PVD), Geostrap polymeric strap for MSE wall panels, Geostrip polymeric strip, a retaining‑wall polymeric strip product and a Polymeric Strip for Retaining Wall identified with HS code 5603.12.

Which HS code is associated with any of Geco’s products?

The Polymeric Strip for Retaining Wall is recorded under HS code 5603.12, which falls within the textile and fabric products chapter covering polypropylene or polyester geosynthetic polymers.

What material composition is specified for the polymeric strip?

The material is described as a blend of polypropylene (PP) and polyester (PET) geosynthetic polymer.

How can a buyer request a sample of the vertical wick drain?

Buyers should contact the supplier to specify the desired length and width of the wick‑drain sample. Samples are typically shipped on a rolled basis in a small pallet or crate for on‑site testing.

Which standards are relevant for the polymeric strips used in MSE walls?

Relevant standards include ASTM D4439 and EN 13252, which address tensile strength, elongation, puncture resistance and UV stability of geosynthetic reinforcement strips.

What certifications should a buyer verify for these geosynthetic products?

Buyers should request ISO 9001 quality‑management certification, product test reports complying with ASTM D4439 or EN 13252, and any CE or ISO 14001 environmental certificates required by the destination market.

What are typical packaging and shipping methods for Geco’s geosynthetic products?

Products are rolled on steel cores, bundled and placed in wooden crates or bulk‑plastic drums, then loaded into 20‑foot or 40‑foot containers. FOB Busan is a common shipping term for South Korean exporters, with CIF options also available.

What minimum order quantity is typical for the polymeric strips?

Although the catalogue does not state a specific MOQ, geosynthetic strips are commonly sold by the roll, with a practical minimum of five rolls (about 5 000 m) depending on width and thickness.