About Chengdu Kanglongxin Plastics Co., Ltd. - Industrial Tapes/Films Supplier in China

Chengdu Kanglongxin Plastics Co., Ltd. operates in Chengdu, China and currently lists ten active products in its catalogue. The company concentrates on industrial films and laminates that serve tape manufacturing, packaging and agricultural applications. All items belong to the plastic film HS chapter 39, covering polycarbonate (PC), polypropylene (PP) and polyethylene terephthalate (PET) materials. The catalogue groups products under fire‑resistant, anti‑scratch and transparent film families, reflecting typical industrial tape and film uses.

The product list includes a white fire‑resistance polypropylene film, a polished‑fine velvet anti‑scratch polycarbonate film, a special textured flame‑retardant polycarbonate film, white die‑cut polycarbonate material, a non‑halogen flame‑retardant PC film (type 1870B), white polypropylene film supplied as roll or sheet, transparent rigid PET sheets from 0.2 mm to 0.9 mm, coated PET film for packaging boxes, a transparent flame‑retardant PC film, and a thin‑gauge flame‑retardant PC film. These films are offered in rolls or sheets suitable for conversion into tapes, laminates or protective covers.

Product Range and Specialties of Chengdu Kanglongxin Plastics Co., Ltd.

The catalogue covers polycarbonate, polypropylene and PET films with specific functional treatments such as fire resistance, anti‑scratch surface and textured finishes. In the industry, fire‑resistant PP films are commonly produced to UL 94 V‑0 or V‑1 levels, with thicknesses ranging from 10 µm to 100 µm and melt flow indices between 5 and 25 g/10 min. Polycarbonate films used for laminates typically have thicknesses of 0.2 mm to 2 mm, optical transmittance above 90 %, surface hardness around 80 Shore D and meet IEC 60695 flame‑retardancy tests. Coated PET packaging films are normally supplied in widths of 0.5‑1.2 m, thicknesses 0.2‑0.9 mm, tensile strength 70‑100 MPa and moisture content below 0.5 %. The anti‑scratch velvet PC film often features a surface roughness (Ra) under 0.8 µm and a scratch resistance measured by a Taber test of 1000 cycles. These specifications align with standard requirements for industrial tape bases, protective laminates and agricultural mulch films.

Trade and Export Information - Chengdu Kanglongxin Plastics Co., Ltd.

China is a major exporter of plastic films, with Europe, the United States, Japan and South Korea representing the largest import markets for fire‑resistant and packaging films. The relevant HS codes are 3919 for polypropylene film, 3920 for polycarbonate and PET films, and 3921 for coated PET sheets, which are subject to customs inspection for fire‑safety documentation and REACH compliance. Buyers typically request ISO 9001 quality‑system certification, REACH registration, RoHS compliance for non‑halogen PC grades, and specific flame‑retardancy test reports (UL 94, IEC 60695). Products are usually shipped in 1 m‑wide rolls wrapped in moisture‑resistant shrink film, or as rigid sheets packed in double‑wall cardboard. A 20‑ft container can accommodate roughly 1 200 kg of film rolls, while a 40‑ft container holds about 2 400 kg, under FOB or CIF incoterms.

The supplier’s target markets are not listed, so typical buyers include manufacturers of industrial tapes, automotive interior laminates, food‑grade packaging and agricultural mulch applications. Import regulations in the EU often require CE marking for films used in food contact, while the US may require FDA compliance for packaging films. Standard logistics involve pre‑loading films on pallets with protective film to avoid deformation, and the use of temperature‑controlled containers is uncommon for these products.

Sourcing from Chengdu Kanglongxin Plastics Co., Ltd. - Buyer Guidance

When sourcing these films, request a Material Safety Data Sheet (MSDS), a full test report for flame‑retardancy (UL 94 or IEC 60695), and a certificate of compliance with REACH and RoHS where applicable. Verify thickness tolerance (typically ±10 %) and optical properties such as transmittance (>90 % for transparent grades) before confirming the order. Samples of at least 1 m roll or a 300 mm × 300 mm sheet panel should be requested to evaluate surface finish, scratch resistance and fire‑performance under the buyer’s own test conditions.

Typical minimum order quantities are expressed in square meters per container, roughly 5 000 m² for a 40‑ft container, with lead times of 30‑45 days after order confirmation. Ensure that the supplier provides a third‑party inspection certificate (e.g., SGS or BV) and that payment terms align with the chosen Incoterm (FOB or CIF).

What fire‑resistant film types are available from Chengdu Kanglongxin Plastics?

The catalogue includes white fire‑resistance polypropylene film, non‑halogen flame‑retardant PC film (type 1870B), transparent flame‑retardant PC film and a thin‑gauge flame‑retardant PC film, each generally meeting UL 94 V‑0 or IEC 60695 fire‑safety standards.

Which HS codes correspond to the listed films?

Polypropylene film typically falls under HS 3919, while polycarbonate and PET films are classified under HS 3920. Coated PET packaging sheets also use HS 3920.

What certifications should a buyer request for these plastic films?

Buyers should ask for ISO 9001 quality‑system certification, REACH registration, RoHS compliance for non‑halogen PC grades, and specific flame‑retardancy test reports such as UL 94 or IEC 60695.

How are the films packaged for shipment?

Products are supplied as rolls (width 0.5‑1.2 m, length up to 1 000 m) wrapped in moisture‑resistant shrink film, or as rigid sheets (0.2‑0.9 mm thickness) packed in double‑wall cardboard boxes.

What are the typical MOQ and lead time?

Minimum orders are usually calculated per container, about 5 000 m² for a 40‑ft container, with a lead time of 30‑45 days from order confirmation.

Which regions import Chinese industrial films most frequently?

The European Union, United States, Japan and South Korea are the largest importers of Chinese industrial films for packaging, automotive laminates and agricultural applications.

How can a buyer request a sample?

A buyer can request a sample of up to a 10 m roll or a sheet panel; the supplier generally ships samples under FOB terms within 7‑10 days after the request.