About Anyida Industry &trade Co., Ltd - Wire Mesh Supplier in China

Anyida Industry &trade Co., Ltd is based in China and lists six active products across its catalogue. The company’s top categories include Wire Mesh, Fencing Materials, Stainless Steel Wires and Sheet Metal Components, reflecting a focus on metal mesh and sheet products. Its catalogue entries cover wire mesh fencing, stainless steel wire mesh, hexagonal wire mesh, welded wire mesh, chain‑link fence and expanded sheet metal. The expanded sheet metal entry specifies carbon steel Q235 or galvanized steel and carries the HS code 7314.50, placing it in the Chapter 73 metal products tariff line. The six listed items are typical of industrial mesh suppliers: wire mesh forms are offered in various patterns such as hexagonal and welded, while fencing products include chain‑link and mesh fencing. The expanded sheet metal product is described by material grade (Q235 carbon steel or galvanized steel) and is classified under HS 7314.50, which covers other sheet metal of iron or steel, not elsewhere specified. No additional HS codes are provided for the other mesh items, but they fall under the broader HS heading 7308 for wire products of iron or steel.

Product Range and Specialties of Anyida Industry &trade Co., Ltd

The catalogue’s wire mesh items - wire mesh fencing, stainless steel wire mesh, hexagonal wire mesh, welded wire mesh and chain‑link fence - are commonly supplied in standard mesh openings ranging from 10 mm to 100 mm and wire diameters between 1.0 mm and 5.0 mm. Stainless‑steel variants are typically produced from grades such as AISI 304 or 316, meeting ASTM A193 or EN 10270 specifications, and may be supplied with a passivation finish for corrosion resistance. Hexagonal and welded meshes are usually fabricated from carbon steel conforming to ASTM A36 or equivalent Chinese GB 700-2001 standards, with tensile strengths of 400‑550 MPa. Expanded sheet metal, classified under HS 7314.50, is generally offered in thicknesses from 0.5 mm to 3.0 mm and widths up to 1500 mm. Common gauges include 0.8 mm, 1.2 mm and 2.0 mm, and the material may be supplied either as raw carbon steel Q235 or hot‑dip galvanized steel, the latter providing a zinc coating of 55‑85 µm for corrosion protection. Industry practice often references ISO 10874 for dimensional tolerances and ISO 9001 for quality management of such sheet products.

Trade and Export Information - Anyida Industry &trade Co., Ltd

China is a major exporter of wire mesh and sheet metal components, with primary destinations in North America, the European Union, the Middle East and Southeast Asia. Wire mesh products fall under HS heading 7308, while expanded sheet metal is covered by HS 7314.50; both categories are subject to customs checks for compliance with material standards and anti‑dumping duties where applicable. Buyers typically request mill test reports (MTR), ISO 9001 certification and, for stainless‑steel items, compliance with ASTM A240 or EN 10088. Logistics for these steel products commonly use 20‑foot or 40‑foot containers, packed on wooden pallets with moisture‑resistant wrapping. Standard Incoterms include FOB Shanghai or CIF destination port, depending on the buyer’s preference. Chinese exporters often apply anti‑corrosion treatments and surface coating documentation to satisfy EU REACH or US ASTM standards.

Sourcing from Anyida Industry &trade Co., Ltd - Buyer Guidance

When sourcing wire mesh or expanded sheet metal from Anyida, buyers should request the specific steel grade certification (e.g., Q235, AISI 304/316) and the corresponding mill test report indicating tensile strength, yield point and chemical composition. For stainless‑steel mesh, a passivation certificate and test results for corrosion resistance (e.g., ASTM B117 salt‑spray) are standard verification documents. Buyers of galvanized sheet metal should obtain a coating thickness report and a zinc content analysis to confirm compliance with ASTM A123. Sample pieces are typically supplied in small‑size packs (e.g., 1 m² of mesh or a single sheet panel) to allow dimensional and finish inspection. Prior to placing a bulk order, verify that the supplier can provide ISO 9001 or equivalent quality management certificates, and confirm packaging details such as pallet dimensions, shrink‑wrap specifications and container loading plans. Lead times for steel mesh products from China usually range from 15 to 30 days, with longer periods for custom mesh sizes or special surface treatments.

What types of wire mesh does Anyida list in its catalogue?

The catalogue includes wire mesh fencing, stainless steel wire mesh, hexagonal wire mesh, welded wire mesh and chain‑link fence, covering both stainless‑steel and carbon‑steel constructions.

Does Anyida provide specifications for the expanded sheet metal?

Yes, the expanded sheet metal is described as carbon steel Q235 or galvanized steel and is classified under HS 7314.50. Typical thicknesses range from 0.5 mm to 3 mm.

Which HS codes apply to the listed products?

Wire mesh items fall under the broader HS heading 7308 for wire products of iron or steel, while the expanded sheet metal is specifically coded as 7314.50.

What certifications should a buyer request for stainless‑steel mesh?

Buyers should request a mill test report, ISO 9001 quality certification, and, if applicable, ASTM A240 or EN 10088 compliance documents, plus a passivation or corrosion‑resistance report.

What is a typical MOQ and lead time for these steel products?

Minimum order quantities usually start at one standard pallet (≈1 ton) and lead times are commonly 15‑30 days from order confirmation, depending on product type and any custom specifications.

How are the products normally packaged for export?

Products are packed on wooden pallets, wrapped in moisture‑resistant film, and loaded into 20‑foot or 40‑foot containers. Standard practice includes securing the load to prevent movement during transit.

Which markets commonly import these Chinese wire mesh and sheet metal products?

Major import markets include the United States, European Union countries, the United Arab Emirates and other Middle Eastern nations, as well as Southeast Asian economies such as Vietnam and Thailand.

What documentation is needed to clear customs for these steel goods?

Customs typically require a commercial invoice, packing list, bill of lading, the relevant HS code declaration, and any required certificates of conformity such as ISO 9001 or material test reports.