About ALDA manufacturer of waste baskets - Household and Recycling Waste Bin Supplier in Poland

ALDA manufacturer of waste baskets is a Poland-based producer of metal waste bins and related sanitation equipment, operating under the legal entity ALDA Poland Sp. z o.o. The supplier currently lists 7 active products, all of which are waste receptacles ranging from 3-litre indoor pedal bins to a 76-litre outdoor recycling system bin, with capacities spanning 3L, 5L, 28L, 60L (single and four-chamber), and 76L. The catalogue covers household, commercial, and external recycling applications, with the metal construction confirmed across every item and a mix of antibacterial coatings and wooden lid finishes on the smaller indoor units. The product range sits within several HS code families relevant to sanitary and recycling equipment: HS 7323.93 covers household articles of stainless steel, HS 7323.89 covers other household articles of iron or steel, HS 7324.90 covers sanitary ware and parts thereof of iron or steel, HS 3924.90 covers other household articles and toilet articles of plastics, and HS 7310.10 covers tanks, casks, drums, cans, and similar containers of iron or steel for any material. Polish manufacturing of metal household goods is well established within the EU single market, and ALDA's stated lead time of 2-4 weeks positions it within typical European short-cycle production norms for made-to-order metal bins.

Product Range and Specialties of ALDA manufacturer of waste baskets

The ALDA catalogue is built around seven specific metal waste bins: a 3-litre pedal bin with antibacterial coating (HS 7324.90), the SHERWOOD 5-litre pedal bin with wooden lid (HS 7323.89), a 3L pedal waste bin (HS 7323.93), a 28-litre waste bin (HS 7323.93), a 60-litre recycling bin (HS 3924.90), a four-chamber waste sorting bin at 4x60L (HS 3924.90), and a 76-litre external system bin for recycling (HS 7310.10). Capacities therefore range from compact 3L countertop units up to a 304-litre four-stream sorting station and a 76L outdoor bin, covering single-stream, multi-stream, indoor, and outdoor use cases. In the wider European metal waste bin category, buyers typically evaluate products against EN 840 standards for mobile waste containers (which set requirements for dimensions, lifting devices, and mechanical performance for 2-wheeled and 4-wheeled bins from 80L to 1100L), as well as material specifications such as stainless steel grade (commonly AISI 304 or AISI 430 for body and lid), galvanised or zinc-coated steel for outdoor units, and ABS or polypropylene plastic components for lids, pedals, and inner buckets. Antibacterial coatings on indoor bins are usually silver-ion or zinc-pyrithione based and are tested under ISO 22196 (measurement of antibacterial activity on plastics and other non-porous surfaces). Colour customisation, RAL palette matching, and bespoke dimensions are standard options in this category, and ALDA's stated capability to adjust dimensions, packaging, and marking aligns with that norm.

Trade and Export Information - ALDA manufacturer of waste baskets

Polish manufacturers of metal household and recycling bins typically export to Western European EU markets (Germany, France, the Netherlands, Belgium, Scandinavia, and the UK historically), as well as to North American B2B buyers through wholesale and HoReCa channels, and to Gulf and North African distributors sourcing outdoor recycling infrastructure. The relevant HS code families for this category are HS 7310 (containers of iron or steel, including the 76L external bin coded 7310.10), HS 7323 (household articles of iron or steel, covering the pedal bins coded 7323.89 and 7323.93), HS 7324 (sanitary ware, covering the antibacterial 3L bin coded 7324.90), and HS 3924 (plastic household articles, covering the 60L and 4x60L recycling bins coded 3924.90). For EU intra-community trade, CE marking under the relevant directives and compliance with REACH (Regulation EC 1907/2006) for any chemical coatings or antibacterial treatments are typically required, while for non-EU destinations buyers commonly request declarations of conformity, material data sheets, and country-of-origin certificates. In this product category, packaging norms usually involve corrugated cardboard outer cartons with foam or moulded pulp corner protection, palletised loads on EUR 1200x800mm EPAL pallets, and 20 ft or 40 ft sea container loads of roughly 1,000 to 2,500 assembled bins depending on size. Incoterms typically applied in this trade are EXW, FCA, FOB Polish Baltic ports (Gdynia, Gdansk), and CIF or DAP for European road freight, with lead times for made-to-order metal bins in Poland commonly falling between 2 and 6 weeks.

Sourcing from ALDA manufacturer of waste baskets - Buyer Guidance

Buyers sourcing from ALDA should request confirmation of the steel grade used in each bin (for example, AISI 304 stainless steel versus galvanised mild steel), the thickness in millimetres, and the type of antibacterial coating applied to the 3L antibacterial pedal bin, ideally supported by an ISO 22196 test report. For the four-chamber 4x60L sorting bin and the 76L external bin, it is advisable to confirm load rating, wheel and axle specification, EN 840 compatibility if intended for municipal collection, and the recyclability of the powder-coat or paint finish used. Standard documents to request before placing an order include a proforma invoice, material specification sheet, REACH compliance statement or safety data sheet for any coatings, a CE declaration of conformity where applicable, and pre-shipment inspection photos. Given the stated low MOQ and 2-4 week lead time, buyers should clarify colour customisation in RAL codes, custom logo or marking methods (silk print, laser engraving, embossing), packaging configuration (individual carton, multi-pack, pallet), and the exact Incoterm and Polish port or border point of dispatch. Verifying these points in writing at the enquiry stage is the most reliable way to align production with the buyer's end-market requirements.

What product categories does ALDA manufacturer of waste baskets supply?

ALDA lists 7 active products, all metal waste bins and recycling receptacles ranging from a 3-litre antibacterial pedal bin to a 76-litre external recycling system bin, including the SHERWOOD 5L wooden-lid pedal bin, a 28L waste bin, a 60L recycling bin, and a 4x60L four-chamber waste sorting station.

Which materials and finishes are used in ALDA's bins?

Every product in the catalogue is listed with a metal base material, with indoor units combining stainless steel or coated steel bodies with ABS or polypropylene plastic pedals and lids, optional silver-ion or zinc-based antibacterial coatings on the 3L antibacterial model, and a wooden lid finish on the SHERWOOD 5L pedal bin.

What HS codes apply to ALDA's waste bins?

The catalogue pairs specific HS codes with each product: 7324.90 for the antibacterial 3L pedal bin, 7323.89 for the SHERWOOD 5L wooden-lid bin, 7323.93 for the 3L and 28L pedal bins, 3924.90 for the 60L and 4x60L recycling bins, and 7310.10 for the 76L external system bin.

What is the typical MOQ and lead time when ordering from ALDA?

ALDA states a low MOQ with the ability to accept orders in any quantity, and a production lead time of 2-4 weeks for made-to-order metal bins, which is consistent with short-cycle European manufacturing norms for this category.

Which certifications and documents should a buyer request from ALDA?

Buyers should request a material specification sheet, REACH compliance or safety data sheet for any antibacterial coating, ISO 22196 antibacterial test report for the 3L antibacterial bin, EN 840 conformity evidence for the larger external bins where applicable, and a CE declaration of conformity for EU destinations.

Can ALDA customise bin dimensions, colours, and branding?

Yes, ALDA states that dimensions, packaging, product marking, and colour can be adjusted to buyer requirements, and the company also produces under its own brand, allowing custom RAL colours, logo application methods, and bespoke sizing across the listed bin range.

What packaging and shipping options are typical for ALDA's bins?

Metal waste bins in this category are typically packed in corrugated cardboard outer cartons with protective inserts, palletised on EUR or EPAL pallets, and shipped in 20 ft or 40 ft sea containers from Polish Baltic ports such as Gdynia and Gdansk, or by European road freight on standard Incoterms such as EXW, FCA, FOB, CIF, or DAP.

Which markets typically import metal waste bins from Poland?

Polish metal bin exporters commonly supply Western European EU buyers, North American wholesale and HoReCa channels, and Gulf and North African distributors of municipal and outdoor recycling infrastructure, with road freight dominant within Europe and containerised sea freight for intercontinental shipments.