About Hanpak JSC - Plastic Bags Supplier in Viet Nam

Hanpak JSC is located in Hanoi, Viet Nam and lists five active products in its public catalogue. The company’s catalogue groups the items under the HS‑code families 3923 (plastic bags) and 3920 (plastic sheets), covering a range of garbage bags, shopping bags and a stretch‑film pallet wrap. Each product is described with its material composition - blends of HDPE, LDPE and LLDPE for the bags and LLDPE for the stretch film - reflecting common polymer choices for flexible packaging. The supplier’s top categories include Plastic Carrier Bags, Nylon Bags, Food Packaging Bags and Industrial Bags, indicating a focus on both consumer‑grade and industrial‑grade polymer packaging solutions.

The listed products comprise a star‑seal garbage bag on roll (HS 3923.21), an S‑shape trash bag on roll (HS 3923.29), a drawstring garbage bag on roll (HS 3923.21), a custom T‑shirt shopping bag on roll (HS 3923.21) and a high‑quality stretch film for pallet packaging (HS 3920.10). All bag items are manufactured from HDPE/LDPE/LLDPE blends, while the stretch film uses LLDPE, a polymer known for its high elongation and puncture resistance. The catalogue does not provide dimensions, but the HS codes place the items firmly within the global trade classifications for flexible plastic packaging.

Product Range and Specialties of Hanpak JSC

Hanpak’s catalogue offers five specific items: three variants of HDPE/LDPE/LLDPE garbage bags on roll (star‑seal, S‑shape and drawstring), a custom‑printed T‑shirt shopping bag on roll, and an LLDPE stretch‑film wrap. In the plastic‑bag market, HDPE blends are typically used for rigidity and moisture barrier, LDPE for flexibility, and LLDPE for superior stretchability. Standard commercial bags in the 3923 HS family are produced in thicknesses from 30 µm to 100 µm, with tensile strengths of 10 - 30 MPa and melt‑flow indices between 5 and 15 g/10 min. Stretch film classified under HS 3920.10 is commonly supplied in gauges of 15 - 30 µm, offering puncture resistance around 1.5 kN and a seal strength suitable for palletizing loads up to several tonnes.

Trade and Export Information - Hanpak JSC

Vietnam is a major exporter of flexible plastic packaging, and items classified under HS 3923 and 3920 are routinely shipped to North America, the European Union and regional Asian markets. Importers usually require compliance with ISO 9001 quality‑management systems, ISO 14001 environmental standards, and for food‑contact bags, FDA registration or EU REACH registration. Containers are typically loaded as 20 ft or 40 ft units, with rolls of bags placed on pallets and shrink‑wrapped; stretch‑film cores are palletised similarly. Common Incoterms for Vietnamese plastic‑bag exporters include FOB Hai Phong or CIF destination ports, with buyers arranging customs clearance under the relevant HS‑code duties and any anti‑dumping or anti‑counterfeit measures that may apply.

Sourcing from Hanpak JSC - Buyer Guidance

Buyers should request a material data sheet that specifies polymer grade, film thickness, tensile strength, melt‑flow index and any food‑contact compliance certificates. Samples of the roll (e.g., a 10‑meter length) allow verification of print quality, seal performance and dimensional tolerances before full‑scale ordering. Typical due‑diligence includes confirming ISO 9001 or ISO 14001 certification, MSDS for the resin, and, where applicable, FDA or REACH test reports to ensure the product meets regulatory requirements for the intended market.

What types of plastic bags does Hanpak JSC produce?

Hanpak lists five catalogue items: star‑seal garbage bags, S‑shape trash bags, drawstring garbage bags, custom T‑shirt shopping bags, all supplied on roll, and an LLDPE stretch film for pallet packaging.

Which HS codes apply to the listed products?

The garbage‑bag and shopping‑bag items fall under HS 3923.21 or HS 3923.29, while the stretch‑film pallet wrap is classified under HS 3920.10.

What materials are used in these products?

The bag range is manufactured from blends of HDPE, LDPE and LLDPE, providing a mix of rigidity and flexibility. The stretch film is produced from LLDPE, which offers high elongation and puncture resistance.

Which certifications should a buyer request for these products?

Buyers typically ask for ISO 9001 quality‑management certification and ISO 14001 environmental compliance. For food‑contact bags, FDA registration or EU REACH compliance is commonly required.

What are the typical specifications for thickness and strength?

Commercial HDPE/LDPE bags are usually 30 - 100 µm thick with tensile strengths of 10 - 30 MPa. LLDPE stretch film is commonly supplied at 15 - 30 µm thickness, delivering puncture resistance around 1.5 kN.

How are the products packaged for export?

Bag rolls are placed on cardboard cores, shrink‑wrapped and palletised for loading into 20 ft or 40 ft containers. Stretch‑film cores are similarly palletised and secured with shrink wrap.

What is the typical lead time for an order?

After artwork approval and material confirmation, production generally requires 30 - 45 days, depending on order volume and any custom printing requirements.

Which markets does Hanpak JSC primarily serve?

While the catalogue does not list specific destinations, Vietnamese plastic‑bag exporters commonly ship to North America, the European Union and other Asian countries.