About City Glass Co. - Glassware Supplier in Egypt
City Glass Co. operates from Egypt as a listed exporter with 22 active product lines concentrated in household and decorative glassware. The catalogue spans tableware (plates, dinnerware plates, Tanta plates, glass plates), drinkware (glass cups, Sky mugs, conical printed mugs, jugs, water jugs), serving pieces (Crystallita bowl, Drop bowl, Drop mini bowl, Prisma mini bowl, fish bowls, serving bowls), packaging formats (glass bottles, bottle jars, Alex jars), and interior decoration items (glass vases, vases, candle holders, ash trays), plus a single industrial line (aqua glass tanks). Product names such as Tanta plate and Alex jar reference Egyptian city and regional naming conventions commonly used by Egyptian pressed-glass manufacturers, where Tanta is a major Delta production hub for consumer glass and Alexandria is a long-standing centre for glass packaging.
The supplier's portfolio sits inside HS chapter 70 (glass and glassware), which covers the categories shown: pressed or blown tableware and kitchenware typically fall under subheading 7013, glass bottles and jars for packaging under 7010, and decorative glass articles under 7013 as well. Egyptian glass manufacturing has a documented base in pressed soda-lime tableware, machine-blown bottles, and hand-finished decorative items, and the catalogue mix here is consistent with that industrial footprint rather than with crystal or flat-glass production.
Product Range and Specialties of City Glass Co.
The 22 listed items fall into five practical groups: tableware (Tanta plates, plates, dinnerware plates, glass plates), drinkware (glass cups, Sky mugs, conical printed mugs, jugs, water jugs), bowls and serving pieces (Crystallita bowl, Drop bowl, Drop mini bowl, Prisma mini bowl, fish bowls), packaging (glass bottles, bottle jars, Alex jars), and decoration (glass vases, vases, candle holders, ash trays), plus the aqua glass tanks line. Buyers in this category should expect typical pressed-glass tableware specs such as soda-lime composition, rim-fired or rolled rims, and nominal capacities in the 150-400 ml range for mugs and 200-600 ml for tumblers, with plate diameters commonly in the 18-28 cm band.
For bottles and jars, the relevant category context is HS 7010 and includes flint (clear), green, and amber soda-lime glass in standard finish calibres (28 mm, 38 mm, 63 mm, 82 mm) used for food, beverage, and pharmaceutical packaging, with capacities typically ranging from 100 ml to 1 litre. Decorative glassware under HS 7013 includes both machine-made and mouth-blown items; buyers should clarify whether a line is machine-pressed (consistent weight and dimensions, suited to volume orders) or hand-finished (variable weight, suited to boutique or hospitality buyers). The aqua glass tanks line refers to small aquarium or display tanks, which under HS 7013 or 7014 are usually sold as flat-panel assembled units with silicone-sealed edges.
Trade and Export Information - City Glass Co.
Egyptian glassware exports typically flow to the MENA region (Saudi Arabia, UAE, Libya, Jordan), Sub-Saharan Africa (Sudan, Kenya, Nigeria), and to European buyers sourcing hospitality and tableware lines, with secondary demand from North American importers of decorative and packaged-glass items. The relevant HS code families for this catalogue are 7010 (glass bottles, jars, flasks, ampoules for conveyance or packing of goods), 7013 (glassware of a kind used for table, kitchen, toilet, office, indoor decoration or similar purposes), and 7014 (illuminated signs, aquarium and similar glassware); the aqua glass tanks line is most likely classified under 7013 or 7014 depending on construction.
For these product categories, buyers and importing countries commonly request compliance with food-contact regulations such as EU Regulation 1935/2004 and LFGB for items intended to hold food or beverages, FDA 21 CFR for the US market, and lead/cadmium release limits under ISO 7086 for decorated tableware. Packaging norms for glassware exports typically involve corrugated cardboard cartons with moulded pulp or expanded polystyrene (EPS) dividers, palletised on standard 1200x1000 mm EUR or 1219x1016 mm US pallets, with 20 ft and 40 ft dry-container loadings depending on item weight and cube. Standard Incoterms used in Egyptian glass exports are FOB Alexandria / Damietta / Port Said, with CIF arrangements for larger-volume buyers; pre-shipment inspection is commonly required by many African and Asian destination countries, and buyers should confirm whether SGS, Bureau Veritas, or Intertek inspection is acceptable.
Sourcing from City Glass Co. - Buyer Guidance
Before placing an order with City Glass Co., buyers should request item-level specifications: for tableware, the exact diameter, height, weight in grams, and rim type; for bottles and jars, the capacity in ml, neck finish, colour (flint/green/amber), and any food-grade documentation; for decorative items, whether the piece is machine-pressed or hand-finished. A pre-shipment sample of each SKU is standard practice in this category, and buyers should weigh and measure the sample against the specification sheet to confirm consistency before authorising production.
Documents typically required for Egyptian glassware exports include a commercial invoice, packing list, certificate of origin (often Generalised System of Preferences or EUR.1 for European buyers), a fumigation-free declaration for the pallets, and for food-contact items a food-grade compliance statement referencing EU 1935/2004, LFGB, or FDA 21 CFR as applicable. Buyers should also confirm the supplier's response time on technical queries, request photographs of a recent production batch (not just catalogue images), and clarify the MOQ per SKU, since pressed-glass tableware is usually produced in mould-specific runs of several thousand pieces per item. For packaging, confirm carton dimensions, pieces per carton, and pallet configuration so that container loading can be calculated accurately.
Frequently Asked Questions About City Glass Co.
What categories does City Glass Co. list?
The catalogue covers 22 active lines across tableware (plates, Tanta plates, dinnerware plates, glass plates), drinkware (glass cups, Sky mugs, conical printed mugs, jugs, water jugs), bowls (Crystallita, Drop, Drop mini, Prisma mini, fish bowls), packaging (glass bottles, bottle jars, Alex jars), decoration (glass vases, vases, candle holders, ash trays), and aqua glass tanks.
Which HS code families apply to this glassware?
The relevant HS chapter is 70 (glass and glassware). Tableware, drinkware, decorative glassware, and bowls fall under HS 7013; glass bottles and jars for packaging fall under HS 7010; aqua glass tanks are typically classified under HS 7013 or 7014 depending on construction.
Which documents and certifications should I request before ordering?
Ask for a commercial invoice, packing list, certificate of origin, and for any food-contact items a food-grade compliance statement referencing EU Regulation 1935/2004, LFGB, or FDA 21 CFR. Lead and cadmium release limits under ISO 7086 should be confirmed for decorated tableware.
What is the typical MOQ for pressed-glass tableware from Egypt?
Pressed-glass tableware is usually produced in mould-specific runs, and MOQs are commonly several thousand pieces per SKU. Buyers should confirm the exact MOQ per item, per colour, and per decoration, as retooling a mould adds cost and lead time.
How is glassware typically packed for export from Egypt?
Standard export packing uses corrugated cardboard cartons with moulded pulp or EPS dividers between pieces, palletised on EUR (1200x1000 mm) or US (1219x1016 mm) pallets. Container loading is calculated per 20 ft or 40 ft dry container based on item weight and carton cube.
Which Incoterms are standard for Egyptian glass exports?
FOB Alexandria, Damietta, or Port Said is the most common basis, with CIF offered for larger-volume orders. Buyers should confirm the loading port, container size, and whether pre-shipment inspection by SGS, Bureau Veritas, or Intertek is included.
How do I verify product quality before shipment?
Request a pre-production sample of each SKU, weigh and measure against the specification sheet, and ask for recent batch photographs rather than catalogue images. For food-contact lines, request a third-party lab report covering lead and cadmium release under ISO 7086 or the equivalent regional standard.
What is a realistic lead time for a glassware order from Egypt?
Lead time depends on whether the items are in stock, in current production, or require a new mould. In-stock catalogue items typically ship within 2-4 weeks, while made-to-order pressed or hand-finished pieces usually require 6-10 weeks plus sea transit from Alexandria or Damietta to the destination port.
, Egypt
