About Davos Trimpex Pvt. Ltd. - Ceramic and Porcelain Tile Supplier in India

India hosts Davos Trimpex Pvt. Ltd., which lists 32 active products covering floor tiles, wall tiles, outdoor tiles, porcelain tiles and sanitary wares. The catalogue specifies dimensions such as floor tiles 1200x1200 mm, 1200x2400 mm, 1600x3200 mm, 1000x1000 mm, 1200x1800 mm, 800x2400 mm, 800x3000 mm, 800x3200 mm, 200x1200 mm and 600x900 mm. It also includes wall tiles in sizes 75x300 mm, 200x200 mm, 100x300 mm, 300x600 mm and 300x450 mm, plus outdoor tiles 600x300 mm, 600x1200 mm and 600x600 mm. Generic entries for floor tiles, wall tiles, outdoor tiles and sanitary ware are listed without size detail. All items are presented under the broader categories of floor, wall and outdoor ceramic solutions as well as porcelain and sanitary products.

Product Range and Specialties of Davos Trimpex Pvt. Ltd.

The product list focuses on ceramic and vitrified tiles with thicknesses typically ranging from 6 mm for porcelain tiles to 10 mm for floor and wall ceramics. In the industry, floor tiles of 600x900 mm to 1200x2400 mm are commonly graded with a PEI (Porcelain Enamel Institute) rating of 3 to 5, water absorption below 0.5 % for vitrified formats, and slip‑resistance ratings of R10 - R13. Wall tiles of 200x200 mm to 300x600 mm usually carry a PEI rating of 1 to 3 and a water absorption limit of 3 % or less. Outdoor tiles are often specified with freeze‑thaw resistance (ASTM C666) and a minimum flexural strength of 25 MPa. Porcelain tiles such as the 600x1200 mm, 6 mm thick item are typically classified as stoneware with a density of 2.3 - 2.5 g/cm³ and a coefficient of friction around 0.55.

Trade and Export Information - Davos Trimpex Pvt. Ltd.

India is a major exporter of ceramic and porcelain tiles, with the HS‑7 chapter 6907 covering most listed formats. Typical destination regions include the Middle East, East Africa, Southern Europe and North America, where large‑scale construction and interior‑fit‑out projects drive demand. Buyers frequently require certifications such as ISO 9001 for quality management, ISO 14001 for environmental compliance, CE marking for EU market entry, and test reports complying with ASTM C1028 (coefficient of friction) or EN 14411 (tile specifications). Export shipments are commonly packed in wooden crates or on plastic pallets, with a 20‑ft container holding roughly 1,200 m² of 600x600 mm tiles, while a 40‑ft container can accommodate up to 2,200 m² depending on packaging density. Standard Incoterms used by Indian tile exporters are FOB (Port of Kolkata, Mumbai or Chennai) and CIF for destination ports in the target regions.

Sourcing from Davos Trimpex Pvt. Ltd. - Buyer Guidance

When sourcing tiles from this supplier, request a physical sample of the exact size and finish to verify colour consistency and surface texture. Ask for laboratory test reports covering water absorption, PEI rating, flexural strength and slip‑resistance to confirm compliance with project specifications. Verify the presence of ISO 9001 or ISO 14001 certificates, and confirm that the tiles meet the relevant regional standards such as EN 14411 for Europe or ASTM C1028 for the United States before finalising the order.

What size options are available for floor tiles from Davos Trimpex?

The catalogue lists floor tiles in dimensions of 1200x1200 mm, 1200x2400 mm, 1600x3200 mm, 1000x1000 mm, 1200x1800 mm, 800x2400 mm, 800x3000 mm, 800x3200 mm, 200x1200 mm, 800x1600 mm, 600x1200 mm, 300x600 mm, 800x800 mm and 600x600 mm. Additional generic floor‑tile entries are also present without specified dimensions.

Which standards should buyers check for the listed porcelain tiles?

Porcelain tiles such as the 600x1200 mm, 6 mm thick product are typically evaluated against EN 14411 (tile classification) and ASTM C648 (water absorption). Buyers should also request flexural strength results (minimum 25 MPa) and a PEI rating of 4 or higher for high‑traffic applications.

What certifications are commonly required for Indian ceramic tile exporters?

Importers usually request ISO 9001 for quality management, ISO 14001 for environmental management, CE marking for European markets, and test reports that meet ASTM or EN standards relevant to tile performance. These documents should be provided before shipment.

How are outdoor tiles typically packaged for export?

Outdoor tiles are generally packed in sturdy wooden crates or on reinforced plastic pallets, with each crate containing a uniform number of tiles to prevent breakage. Cushioning materials such as foam or corrugated paper are used inside the crates, and the crates are sealed for moisture protection.

What are the typical lead times for bulk orders of ceramic floor tiles from India?

Lead times for bulk ceramic tile orders from Indian manufacturers range from 30 to 45 days, depending on the production schedule, size customisation and the need for any specific quality certifications. Faster turnaround may be possible for standard size items that are kept in stock.

What documentation should be requested to verify tile quality before shipment?

Buyers should request a test report covering water absorption (≤0.5 % for vitrified tiles), PEI rating, slip‑resistance (R‑value), and flexural strength. In addition, a copy of the supplier’s ISO 9001 certificate and any relevant CE or ASTM compliance documents should be reviewed.

Which HS code applies to most of the ceramic and porcelain tiles listed?

The majority of the listed ceramic and porcelain tiles fall under HS Chapter 69, sub‑heading 6907, which covers ceramic tiles, including vitrified and porcelain formats.

Are there any specific packaging requirements for sanitary ware items?

Sanitary ware is typically packed in individual cardboard boxes with protective foam inserts, then placed on wooden pallets wrapped in stretch film. The packaging must meet IS 3048 (Indian Standard) for safe transport and prevent damage to glazed surfaces.