Import Penetration Bitumen 80/100 — Buy in wholesale FOB from Supplier in Singapore

Bitumen Penetration Grade 80/100 is a standard penetration grade Bitumen usually used as a Paving Grade Bitumen suitable for road construction and for the production of asphalt pavements with superior properties. This grade of Bitumen is mainly used in the manufacture of hot mix asphalt for bases and wearing courses. Penetration Grade Bitumen supplied by ASI GLOBAL TRADE is petroleum grade bitumen, manufactured from fractional / vacuum distillation of crude oil. The Bitumen supplied by ASI GLOBAL TRADE is produced from vacuum residue (short residue) feedstock. Penetration Grade bitumens are specified by the penetration and softening point test. Designation is by penetration range only. The penetration grade bitumens have a thermoplastic property which causes the material to soften at high temperatures and to harden at lower temperatures. This unique temperature/ viscosity relationship is important when determining the performance parameters such as the adhesion, rheology, durability and application temperatures of bitumen. SPECIFICATIONS : CHARACTERISTIC TEST METHOD UNIT MIN. MAX. Specific gravity at 25°C ASTM D70 °C 1.01 1.05 Penetration at 25°C ASTM D5 mm 80 100 Softening Point ASTM D36 °C 42 52 Ductility at 25°C ASTM D113 Cm 100 - Loss on heating ASTM D6 % 0,5 Flash Point ASTM D92 °C 225 Solubility in Trychloroethyelene ASTM D2042 % 99 Performance after RTFOT Method Test to ASTN D1754: - Change in mass (m/m) ASTM2872 % - 0.5 - Retained Penetration 25°C, 100g, 5s (% of original) ASTM D5 % 50 - - Increase in softening point ASTM D36 °C - â?¤8 - Softening point after hardening ASTM D36 °C 45 - LEGAL NOTES The information, and, in particular, the recommendations relating to the application and end-use of ASI GLOBAL TRADE products, are given in good faith based on ASI GLOBAL TRADE current knowledge and experience of the products when properly stored, handled and applied under normal conditions in accordance with ASI GLOBL TRADE recommendations. In practice, the differences in materials, substrates and actual site conditions are such that no warranty in respect of merchant-ability or of fitness for a particular purpose, nor any liability arising out of any legal relationship whatsoever, can be inferred either from this information, or from any written recommendations, or from any other advice offered. The user of the product must test the products suitability for the intended application and purpose. ASI GLOBAL TRADE reserves the right to change the properties of its products. The proprietary rights of third parties must be observed. All orders are accepted subject to our current terms of sale and delivery. Users must always refer to the most recent issue of the local Product Data Sheet for the product concerned, copies of which will be supplied on request.