About ZAO "MPK "KRZ" - Bitumen Roofing and Waterproofing Manufacturer in the Russian Federation

ZAO "MPK "KRZ" is a manufacturer based in Ryazan, Russian Federation, operating in the bitumen roofing and waterproofing materials segment. The company lists 9 active products in its catalogue, organised across bitumen membranes, bitumen shingles, petroleum bitumen grades, bitumen mastics and primers. Its core offer sits in HS subheadings 6807.10 and 6807.90 (articles of asphalt or of similar material in rolls, sheets, tiles and similar), with supporting items classified under 2713.20, 2714.90, 2708.20 and 2715.00 covering petroleum bitumen, bituminous mixtures and bituminous mastics. The Ryazan facility produces under the Elastoizol, Eurocate and Hydrobarer lines, supplying rolled membranes, shingles, bulk bitumen grades and liquid-applied waterproofing compounds. The catalogue combines finished waterproofing goods with the upstream binder materials used in their production. Rolled membranes and shingles are paired with penetration-grade petroleum bitumens (60/70 and 80/100) and SBS/APP polymer-modified bitumens that feed both roofing and road-paving applications. Mastics and primers under HS 2715.00 cover surface preparation and detailing work, while the oil-bitumen-impregnated roofing paper under HS 6807.10 provides a traditional base layer option. Together, the 9 items give a buyer a single-source chain from raw binder through to installed-system components for flat-roof and pitched-roof construction.

Product Range and Specialties of ZAO "MPK "KRZ"

The 9-item catalogue is anchored by the Elastoizol family of bitumen-polymer rolled membranes and shingles, split into Premium, Econom and Tropic variants. The Premium and Tropic lines fall under HS 6807.10 and use a bitumen-polymer elastomeric compound with a reinforcement layer, typically polyester or glass-fibre non-woven, while the Econom line is classified under HS 6807.90 as APP/SBS modified bitumen membrane. Eurocate, also under 6807.10, is an oil-bitumen-impregnated roofing paper finished with a mineral dressing, the type of product used as an underlay or temporary waterproofing layer. The polymer-modified bitumen (HS 2713.20) and the road pavement bitumen (HS 2714.90, penetration grade 60/70 or 80/100) supply the binder side of the range, with construction bitumen (HS 2708.20) in the same penetration grades covering civil and infrastructure use. Liquid-applied waterproofing is covered by two HS 2715.00 items: a bitumen primer described as an oil-asphalt solution in organic solvents with a softening point of at least 80 °C, and Mastic Hydrobarer No. 6, a bitumen-polymer composite mastic used for detailing, joints and repairs. Across the category, buyers of bituminous roofing membranes typically compare tensile and elongation figures along the longitudinal and transverse axes (commonly reported in N/50 mm and %), tear resistance in N, cold-flexibility temperature (often -20 °C to -25 °C for SBS grades), flow resistance at elevated temperature, and roll dimensions of 1 × 10 m with a mass per square metre between roughly 3.5 kg/m² and 6.0 kg/m² depending on grade. APP-modified membranes are generally rated for hotter climates and steeper slopes, while SBS-modified grades are preferred where low-temperature flexibility is critical.

Trade and Export Information - ZAO "MPK "KRZ"

Russian manufacturers of bituminous roofing materials typically export across the CIS, the Middle East, North Africa, South Asia (India, Bangladesh), Southeast Asia and parts of Europe, with shipments also reaching Latin American and Caribbean markets. The catalogue's HS footprint (6807.10, 6807.90, 2713.20, 2714.90, 2708.20, 2715.00) places the goods in chapters where buyers usually require a mill test certificate or certificate of analysis for the bitumen binder (penetration at 25 °C, softening point ring-and-ball, ductility at 25 °C, flashpoint Cleveland open cup), plus EN 13707 or EN 13969 conformity for European-bound membrane rolls, CE marking where accepted, and fire-classification documentation such as BROOF(t1)/(t2) under EN 13501-5 for exposed roofing. Shipment of rolled membranes is typically on pallets in 20 ft or 40 ft containers, with rolls wrapped in protective film and standing on end; bulk bitumen grades are usually moved in heated ISO tank containers, bitutainers or 200 kg drums. For Russian-origin bituminous goods, buyers commonly request the GOST or TU technical specification alongside EN data sheets, customs declarations with the EORI or equivalent importer code, and a certificate of origin for tariff preference calculations. Incoterms used in this segment are most often FOB, CFR or CIF for containerised membrane shipments, and FOB or DAP for bulk bitumen moved in tank containers. Pre-shipment inspection by bodies such as SGS, Bureau Veritas or Intertek is standard practice for first-time contracts, and many public-tender buyers (particularly in the Gulf and South Asia) require the membranes to be tested against ASTM D5147 (cold-flexibility and tensile), ASTM D6163/D6164/D6162 (SBS or APP modified bitumen sheets) or GOST 30547 where Russian norms apply. Packaging norms typically call for rolls of 1.0 × 10.0 m, with a stated mass per roll between 35 kg and 60 kg depending on the membrane type, and bitumen primers/mastics in metal drums of 20 L, 50 L or 200 L.

Sourcing from ZAO "MPK "KRZ" - Buyer Guidance

Buyers sourcing bituminous roofing membranes from Ryazan should request the full technical data sheet for each Elastoizol variant, including reinforcement type and weight (g/m²), thickness (mm), tensile strength in N/50 mm both directions, elongation at break (%), cold flexibility (°C), heat resistance (°C), and roll dimensions with declared mass per roll. For the bitumen grades under HS 2713.20, 2714.90 and 2708.20, ask for the latest certificate of analysis showing penetration at 25 °C (in 1/10 mm), softening point (°C), ductility at 25 °C (cm), flashpoint (°C), solubility in trichloroethylene (%) and loss on heating (%). For primers and mastics under HS 2715.00, request solids content, softening point, adhesion strength and coverage rate in kg/m², plus the safety data sheet for the solvent system. Before placing a production order, confirm the CE/EN conformity documents or GOST/TU specifications actually shipped with each lot, ask for reference projects in the destination climate (hot-arctic, tropical or temperate), and request production samples cut from a pilot roll rather than display pieces. Clarify MOQ per SKU, lead time from order to ex-works loading (typically 15-30 working days for membranes, longer for custom SBS formulations), and whether private-label or contract manufacturing under the buyer's brand is available for the membrane lines. A short pre-shipment inspection covering roll dimensions, mass, surface dressing weight and a laboratory re-test of cold flexibility and tensile is a sensible minimum for first contracts.

What product families does ZAO "MPK "KRZ" manufacture in Ryazan?

The catalogue covers the Elastoizol Premium, Econom and Tropic bitumen-polymer membranes and shingles, the Eurocate oil-bitumen roofing paper, polymer-modified and penetration-grade petroleum bitumens, construction bitumen, a bitumen primer and the Mastic Hydrobarer No. 6. The 9 items span HS subheadings 6807.10, 6807.90, 2713.20, 2714.90, 2708.20 and 2715.00.

Which bitumen grades are offered for road and construction use?

Road pavement bitumen (HS 2714.90) and construction bitumen (HS 2708.20) are both offered in penetration grades 60/70 and 80/100. Polymer-modified bitumen (HS 2713.20) is supplied with SBS or APP modifier for higher-specification roofing and infrastructure binders.

What documents should be requested with each shipment?

Request a mill test certificate or certificate of analysis for the bitumen binder, EN 13707 / EN 13969 conformity and CE marking for membrane rolls, GOST or TU specification sheets, a certificate of origin, MSDS for the primer and mastic, and any fire-classification report such as BROOF(t1) under EN 13501-5 for exposed roofing.

What are the typical specifications for bitumen roofing membranes?

Membranes in this category are usually supplied in 1.0 × 10.0 m rolls with a mass of 3.5-6.0 kg/m². Buyers normally check tensile strength in N/50 mm, elongation at break in percent, cold flexibility (commonly -20 °C to -25 °C for SBS grades), heat resistance, and reinforcement weight in g/m².

How are the products packed and shipped?

Rolled membranes are typically palletised in 20 ft or 40 ft dry containers, with rolls wrapped in protective film and stored vertically. Bulk bitumen grades are usually shipped in heated ISO tank containers or 200 kg drums, while primers and mastics are packed in 20 L, 50 L or 200 L metal drums.

What is a sensible MOQ and lead time to confirm?

MOQ is usually one 20 ft container for membrane rolls and one ISO tank or several tonnes for bulk bitumen. Lead time is typically 15-30 working days for standard membrane SKUs from order to ex-works loading, longer where a custom SBS or APP formulation is required.

Can the membranes be produced under the buyer's brand name?

The Ryazan facility lists private-label and contract manufacturing as part of its offer, subject to minimum order quantities. Buyers should confirm in writing the labelling, packaging and documentation requirements, and approve a pre-production sample before any contract manufacturing run.

Which regions typically import Russian bituminous roofing materials?

Typical destinations include CIS countries, the Middle East, North Africa, India and other parts of South Asia, Southeast Asia, parts of Europe, and selected Latin American and Caribbean markets. Climate suitability (APP for hot climates, SBS for cold flexibility) should be matched to the destination before ordering.