Import Heavy Duty Cleaning & Sanitizing Wipes — Buy in Bulk from Supplier in United States

Now Available in a Canister with 100 wipes. 12 canisters per case. 70% Isopropyl Alcohol and 30% Water HEAVY DUTY CLEAN WIPES 150 large surface area (7"x 7") wipes are ideal for solder paste stencils, equipment wrap and general purpose wipe downs and cleaning. Uses light weight cellulose/polyester nonwoven material suitable for ISO Class 5-8, Cleanroom Class 100 -100,000, EU Grade B/C/D and USP EPA COMPLIANT Applications in Sanitizing Surfaces in ISO Class 5 and higher cleanroom environments, USP applications in General equipment wraps, and wipe downs, applying and removing disinfectants n Cleaning of lab equipment and solder paste stencils n General wiping in component prep, compounding, and wash areas Benefits n Dries to zero residue n Non-Ozone depleting n Low extractable levels and particle counts in Economical Method of Use. Use at room temperature. Donot elevate above flash point temperature. Drying can be enhanced with SMT Soft Wipes or air knife. Test a small sample for suitability. Technical Data Wipe Size: 7 x 7 inch; 150 per case 55% cellulose/45% polyester nonwoven cleanroom wiper Vapor Pressure: 1.2 (mmHg) @ 68F Evaporation Rate: .17 (Butyl Acetate=1)* Boiling Point: 346-406F (176-209C) Flash Point: 125F (52C), TCC Specific Gravity: 0.759 (Water = 1) Volatility: 100% Solubility: Slight Hazard: 1 Fire: 2 Toxicity: 1 Reactivity: 0 DOT Rating: Flammable LiquidN.O.S *Drying time on stencil is under 1 minute. Flammable Liquid fumes can ignite from direct source of ignition, such as a spark. Effective October 1, 1993, any liquid with a flash point below 140F is considered a flammable liquid by the DOT. This is for shipping purposes only. Disposal Incineration may be acceptable depending on other waste products present in the solvent. Consult your waste hauler. Precautions Keep out of reach of children. Always wear natural rubber gloves, safety glasses and work in a well-ventilated area. Avoid frequent contact with skin. May affect latex painted surfaces. Avoid contact with some vinyl such as ABS and Styrene. Made in the U.S.A