About Ximena - Petroleum By Products Supplier in Venezuela

Venezuela‑based Ximena lists six active products across petroleum by‑products, diesel, crude oil and sugar. The catalogue includes crude oil, refined sugar, a mixed fuel line covering EN590 diesel, D6 fuel oil, JP‑54 jet fuel, Jet A‑1, gasoline, D2 diesel, urea, pet coke and PET resin. The supplier’s trust tier is classified as harbor, indicating a moderate level of verification. The product set reflects typical Venezuelan export commodities in the energy and agricultural sectors.

The crude oil entry falls under the standard HS chapter 27 for petroleum oils, while the sugar entry aligns with HS chapter 17 for sugars. Diesel‑related entries such as EN590, D2 and D6 correspond to HS 2710 for middle distillates, and the jet fuel variants map to HS 2710 as well. The inclusion of urea and pet coke expands the portfolio into nitrogen fertilizer and carbon feedstock categories, both commonly exported from Venezuela. No additional HS codes are provided in the source data.

Product Range and Specialties of Ximena

Ximena’s catalogue enumerates crude oil, sugar, EN590 diesel, D2 diesel, D6 fuel oil, JP‑54 jet fuel, Jet A‑1, gasoline (RON 89‑93), urea, pet coke and PET resin. In industry practice crude oil exported from Venezuela typically has an API gravity between 30 ° and 40 ° and sulfur content ≤1.0 %, while refined sugar is often graded ICUMSA 45‑70 with moisture ≤0.2 %. EN590 diesel must meet sulfur ≤10 ppm, cetane ≥51, density 0.820‑0.845 kg/L and flash point ≥55 °C; D2 diesel usually allows sulfur up to 50 ppm. JP‑54 and Jet A‑1 jet fuels share specifications of flash point ≥38 °C, sulfur ≤30 ppm and a freezing point near - 47 °C. Gasoline marketed as 89‑93 RON requires vapor pressure 7‑9 kPa and sulfur ≤10 ppm. Urea for fertilizer is standardized at 32.5 % nitrogen with moisture ≤0.2 %, and pet coke grades are often low‑sulfur (<0.5 %).

Trade and Export Information - Ximena

Venezuela remains a major exporter of crude oil, refined petroleum products and sugar, supplying markets in the United States, Europe and parts of Asia. HS 2709 is used for crude oil, HS 2710 for middle distillates such as EN590 diesel, D2 and D6 fuel oil, HS 2711 for jet fuels, HS 3101 for raw or refined sugar, HS 3102 for urea, and HS 2714 for pet coke. Buyers typically require ISO 9001 quality management certificates, API Q1 or API 6A for petroleum grades, and an SGS or Bureau Veritas inspection report confirming conformity to the relevant specifications. Common incoterms are FOB from ports such as Puerto Cabello and CIF to European or Asian destinations, with bulk carriers for oil and pet coke and 20‑ft or 40‑ft containers for sugar and urea.

Sourcing from Ximena - Buyer Guidance

When sourcing from Ximena, request a current Certificate of Analysis for each product, including API gravity and sulfur content for crude oil, and EN590 test results for diesel. For sugar, ask for an ICUMSA grade report, moisture and ash analysis, and a recent SGS inspection certificate. Urea shipments should be accompanied by a nitrogen purity certificate and moisture test, while pet coke buyers should obtain a sulfur and ash content report. Verify that the supplier can provide a Certificate of Origin, compliance with ISO 9001 and any required export licenses before confirming the order.

What petroleum products are listed by Ximena?

Ximena lists crude oil, EN590 diesel, D2 diesel, D6 fuel oil, JP‑54 jet fuel, Jet A‑1, gasoline (RON 89‑93), urea, pet coke and PET resin. Each entry corresponds to a distinct HS code family for petroleum and related commodities.

Which HS code categories apply to Ximena’s crude oil and diesel products?

Crude oil typically falls under HS 2709, while diesel and fuel oil products such as EN590, D2 and D6 are classified under HS 2710 for middle distillates. Jet fuel variants are covered by HS 2711.

What quality specifications are commonly required for EN590 diesel?

EN590 diesel must meet a sulfur limit of 10 ppm, a cetane number of at least 51, a density between 0.820‑0.845 kg/L and a flash point not lower than 55 °C. Compliance is verified through a certified laboratory analysis.

What laboratory documentation should a buyer request for sugar shipments?

Buyers should request a Certificate of Analysis showing the ICUMSA grade (commonly 45‑70), moisture content ≤0.2 %, ash ≤0.1 % and a recent SGS inspection report. These documents confirm conformity to standard sugar quality standards.

Which certifications are typically expected from Venezuelan petroleum exporters?

Exporters usually provide ISO 9001 quality‑management certification, API Q1 for petroleum product handling, and an SGS or Bureau Veritas inspection certificate confirming compliance with the relevant HS code specifications. Additional certificates of origin may be required by the destination country.

What packaging formats are standard for Ximena’s bulk commodities?

Crude oil and petroleum products are shipped in ISO‑standard tankers or bulk carriers, while sugar and urea are commonly packed in 25 kg paper bags or 1‑ton bulk bags for container loading. PET resin is typically supplied on pallets in polyethylene bags.

How can a buyer verify the purity of urea supplied by Ximena?

Request a Certificate of Analysis that details nitrogen content of 32.5 % N, moisture ≤0.2 % and any impurity limits. An accompanying test report from an accredited laboratory provides additional verification.

What incoterms are most frequently used for shipments from Venezuela?

FOB from Venezuelan ports such as Puerto Cabello and CIF to European or Asian ports are the most common incoterms for bulk petroleum and sugar exports. These terms define the point of risk transfer and associated freight responsibilities.