About Unor Exim Private Limited - Medical Face Mask Supplier in India

India‑based Unor Exim Private Limited lists five active products across the categories of 3 Ply Face Masks, Disposable Bouffant Caps and Medical Face Masks. All items fall under HS Chapter 63, with the masks classified under HS 6307.90 and one cap variant under HS 6505.90, reflecting non‑woven textile articles and headgear respectively. The catalogue specifies materials such as non‑woven polypropylene (PP) fabric, melt‑blown filter layers and medical‑grade non‑woven fabric, each described with GSM values where provided.

The product list includes the UNOMAK 3 Ply Face Mask (Regular) Earloop made from non‑woven cloth without a melt‑blown filter, the UNOMAK GNL‑99 mask that adds a melt‑blown polypropylene filter, and the UNOMAK FE‑99 3‑Ply mask using non‑woven PP with melt‑blown filtration. Two bouffant caps are offered: a 21‑inch cap of 10 GSM PP fabric and a 19‑inch cap of 10 GSM medical‑grade non‑woven fabric. All masks share the HS 6307.90 code, while the 19‑inch cap is recorded under HS 6505.90.

Product Range and Specialties of Unor Exim Private Limited

The listed masks are typical three‑layer surgical designs, where the outer and inner layers are spun‑bonded PP and the middle layer is melt‑blown for filtration. In the industry, such masks commonly meet ASTM F2100 Level 1 or EN 14683 Type I specifications, with bacterial filtration efficiency (BFE) around 95 % and particle filtration efficiency (PFE) of 95‑98 %. The 10 GSM bouffant caps correspond to lightweight headcoverings used in clean‑room and medical settings, often supplied in 20‑30 cm widths and packaged in bulk poly‑bags.

Indian manufacturers of these products typically offer variants in GSM ranges of 20‑30 for masks and 10‑12 for caps, and may provide additional features such as ear‑loop elasticity, nose‑wire inserts, or hypo‑allergenic coatings. The melt‑blown layer is usually specified by its basis weight (e.g., 15‑20 g/m²) to achieve the required filtration performance.

Trade and Export Information - Unor Exim Private Limited

India is a major exporter of non‑woven medical textiles, with Europe, North America, the Middle East and Southeast Asia representing the largest import regions for surgical masks and disposable caps. HS 6307.90 items are subject to customs inspection for compliance with health‑product regulations, and HS 6505.90 caps often require verification of material safety data sheets (MSDS) and compliance with local textile standards. Buyers commonly request CE marking, ISO 13485 quality‑management certification, and where applicable FDA 510(k) clearance for masks destined for the United States.

Typical shipment configurations involve 20‑foot containers holding 15‑20 kg of masks per cubic meter, allowing roughly 20 000 to 30 000 individual masks per container, while caps are packed at higher density due to lower bulk. Incoterms such as FOB or CIF are standard, and importers usually arrange pre‑shipment inspection (PSI) to confirm material composition, GSM, and filtration test results before cargo release.

Sourcing from Unor Exim Private Limited - Buyer Guidance

When sourcing from Unor Exim, buyers should request a product specification sheet that lists material composition, GSM, melt‑blown basis weight, ear‑loop type and any nose‑wire inclusion. Test reports for BFE, PFE, differential pressure and splash resistance should be provided to verify compliance with ASTM F2100 or EN 14683 standards; certificates such as CE Declaration of Conformity, ISO 13485 and, where relevant, FDA 510(k) documentation should be confirmed before order confirmation.

Typical minimum order quantities are around 10 000 pieces for masks and 5 000 pieces for caps, with lead times of 30‑45 days from order receipt. Packaging is usually individual poly‑bagging of masks (e.g., 50 pcs per bag) placed in cartons of 1 000 masks, while caps are bulk‑packed in sealed poly‑bags. Buyers are advised to verify container loading plans and request a pre‑shipment inspection report to ensure the shipped goods match the agreed specifications.

What product categories does Unor Exim Private Limited list?

The supplier lists three product categories: 3 Ply Face Masks, Disposable Bouffant Caps and Medical Face Masks, represented by five individual SKUs.

Which HS codes are associated with the listed masks and caps?

All three mask SKUs are classified under HS 6307.90, while the 19‑inch bouffant cap is recorded under HS 6505.90; the 21‑inch cap also uses HS 6307.90.

What materials are used in the UNOMAK face masks?

The masks are made from non‑woven polypropylene fabric; two variants include a melt‑blown polypropylene filter layer, and one variant is a non‑woven cloth without melt‑blown filtration.

What specifications should a buyer verify for the surgical masks?

Buyers should check GSM (typically 20‑30 g/m²), melt‑blown basis weight, bacterial filtration efficiency (≈95 %), compliance with ASTM F2100 Level 1 or EN 14683 Type I, and request CE or ISO 13485 certificates.

Are any certifications required for the bouffant caps?

While the facts do not list certifications, buyers normally request material safety data sheets (MSDS) and confirm that the caps meet any applicable local textile standards or CE conformity for non‑medical headgear.

What is the typical minimum order quantity and lead time for these products?

Typical MOQ is about 10 000 masks or 5 000 caps, with a production lead time of 30‑45 days from order confirmation.

How are the masks and caps usually packaged for export?

Masks are commonly packed in individual poly‑bags (e.g., 50 pcs per bag) and placed in cartons of 1 000 masks; caps are bulk‑packed in sealed poly‑bags and stacked in cartons suitable for container loading.

Which regions commonly import Indian‑made medical masks and caps?

Major import markets include the United States, European Union, Middle East countries and Southeast Asian nations, where regulatory compliance and test certificates are routinely required.