About Triumph Corporation - Nonwoven Fabric Supplier in India

Triumph Corporation is based in India and currently lists six active nonwoven fabric products. The catalogue includes PP Spunbond Nonwoven Fabric, Hydrophilic & Hydrophobic Non Woven Fabric, Crop Cover Nonwoven Fabric, Fruit Cover Fabric, UV Treated Non Woven Fabric, and Anti Skid Fabric. All items fall under the broader category of nonwoven fabrics, which are classified in HS chapter 59 for trade statistics. The supplier’s top categories are recorded as "Other - Fabric and Raw Material" and "Knitted & Woven Fabrics", reflecting a focus on raw textile materials. The product list does not specify certifications, so buyers should verify compliance with relevant standards.

The six products cover a range of functional applications, from agricultural covers to UV‑resistant and anti‑slip solutions. Each product is typically produced as a continuous roll with widths up to 1.5 m and basis weights that vary by end use. The PP Spunbond fabric is usually manufactured by melt‑blown or spunbond processes, delivering tensile strengths between 30 - 70 N/15 mm. Hydrophilic and hydrophobic variants are distinguished by water absorption rates, often measured by ASTM D570. Crop and fruit cover fabrics are engineered for breathability and light transmission, commonly meeting UV transmittance below 5 %. Anti‑skid fabrics incorporate surface texturing or polymer coatings to achieve slip resistance values above 0.5 μm.

Product Range and Specialties of Triumph Corporation

The catalogue focuses on six nonwoven fabric types: a generic PP spunbond, hydrophilic/hydrophobic blends, agricultural crop and fruit covers, a UV‑treated version, and an anti‑skid variant. In the broader market, spunbond nonwovens are offered in basis weights from 30 gsm to 150 gsm, with tensile strength grades such as 30 N/15 mm (light) up to 100 N/15 mm (heavy‑duty). Hydrophilic fabrics are graded by water uptake percentage (typically 30‑80 % after 24 h), while hydrophobic grades are evaluated by water contact angle (>100°). UV‑treated nonwovens are commonly rated to block at least 95 % of UV‑A/B radiation and are tested to ISO 9050. Anti‑skid fabrics are measured by slip coefficient or coefficient of friction, with industry targets above 0.5 μm. Buyers usually request data on burst strength, air permeability (ASTM D737) and dimensional stability for these applications.

Trade and Export Information - Triumph Corporation

India is a major exporter of technical nonwoven fabrics, supplying regions such as North America, the European Union, the Middle East and Southeast Asia. Export shipments are typically classified under HS chapter 59, with sub‑headings for polypropylene spunbond (5903) and other polymer nonwovens (5904). Importers commonly require ISO 9001 quality management certification, Oeko‑Tex Standard 100 for chemical safety, and ASTM test reports for tensile strength, water absorption and UV protection. Standard packaging involves rolled fabric on paper cores, protected in shrink‑wrap, loaded in 20‑ft or 40‑ft containers; freight terms frequently used are FOB Indian ports or CIF destination. Indian exporters also adhere to customs regulations such as the Bureau of Indian Standards (BIS) conformity for certain textile grades, and buyers may request a Certificate of Origin for preferential duty treatment.

Sourcing from Triumph Corporation - Buyer Guidance

When sourcing from Triumph Corporation, buyers should request product data sheets that list basis weight (gsm), tensile strength (N/15 mm), water absorption or contact angle, UV blockage percentage and anti‑skid slip coefficient. Sample rolls of at least 10 m² are standard for performance verification, and test reports following ASTM D5035 (breaking strength), D570 (water absorption), D737 (air permeability) and ISO 9050 (UV transmission) should be reviewed before final order. Verify that the supplier can provide any required certifications such as ISO 9001, Oeko‑Tex or BIS conformity, and confirm packaging dimensions and container loading plans to avoid shipment surprises.

What types of nonwoven fabrics does Triumph Corporation offer?

The company lists six types: PP Spunbond, Hydrophilic & Hydrophobic blends, Crop Cover, Fruit Cover, UV‑Treated, and Anti‑Skid fabrics, all supplied as rolled material.

Are there standard specifications for the PP Spunbond fabric?

Typical PP spunbond fabrics are produced in basis weights from 30 gsm to 150 gsm and tensile strengths between 30 N/15 mm and 70 N/15 mm, measured according to ASTM D5035.

Which certifications should a buyer request for these fabrics?

Buyers usually ask for ISO 9001 quality management, Oeko‑Tex Standard 100 for chemical safety, and any relevant ASTM test reports (e.g., D570, D737, D5035).

How is UV protection measured for the UV‑Treated fabric?

UV protection is commonly expressed as UV transmittance percentage, with industry targets of 5 % or lower, verified by ISO 9050 testing.

What is the typical minimum order quantity (MOQ) for a sample?

Suppliers of technical nonwovens often provide sample rolls of at least 10 m², which is sufficient for laboratory testing and performance evaluation.

What packaging and shipping formats are used?

Products are rolled on paper cores, shrink‑wrapped, and loaded into 20‑ft or 40‑ft containers; freight terms such as FOB Indian ports or CIF destination are common.

What lead time can buyers expect for a full order?

Lead times for nonwoven fabric orders from Indian manufacturers usually range from four to six weeks after final specifications and purchase order are confirmed.