Shijiazhuang Hanyao Import And Export Trade Co., Ltd

Shijiazhuang Hanyao Import And Export Trade Co., Ltd operates out of Shijiazhuang, China and currently lists 17 active products. The catalogue covers a mix of cotton yarns, woven twill fabrics, flannel fabrics and finished garments such as Arabian robes. Product entries include 100 % cotton yarn cards with warp‑weft counts of 21 × 21 and 16 × 12, as well as a variety of twill fabrics identified by counts like 32 × 32 and 65/35 blends. Two garment items are recorded with HS codes 6208.91 and 6209.20, indicating classification under ready‑made clothing for adults and children respectively. All fabric items fall under HS Chapter 52 for cotton textiles, while the apparel items are under Chapter 62.

Dimensions listed in the catalogue follow a width × length convention, for example the 100 % cotton twill 32 × 32 is described as 130 cm × 70 cm. Flannel fabrics are presented with GSM values around 85 gsm, reflecting a lightweight finish suitable for children’s clothing. The Arabian robe variations specify a three‑layer peached fabric, with the embroidered version noting a cotton blend of similar weight. Materials are described as 100 % cotton or cotton‑polyester blends, matching the standard fiber content for these textile categories. The product range therefore spans raw yarn, intermediate woven fabrics and finished garments within a single supplier portfolio.

The supplier’s yarn cards are 100 % cotton with warp‑weft counts such as 21 × 21 and 16 × 12, corresponding to a linear density of approximately 30 tex, a common grade for knitting and weaving applications. In the broader market, cotton yarns of this count are typically tested for tensile strength above 300 MPa and moisture regain near 8 %. The twill fabrics listed (e.g., 32 × 32 and 65/35 blends) are usually produced with a plain or twill weave, yielding a GSM range of 150‑200, suitable for shirts, lightweight outerwear and children’s garments. Flannel fabrics at 85 gsm are classified as lightweight, often used for linings or summer apparel, and are subject to ISO 105‑C06 colorfastness testing.

Finished Arabian robes are made from a three‑layer peached fabric; the base layer is polyester in the 85 gsm version and cotton blend in the embroidered version, aligning with typical Middle Eastern market preferences for breathable yet structured garments. Standard specifications for such robes include seam strength of at least 2 kN, and a fabric shrinkage limit of 2 % after laundering, as required by many apparel import standards. Overall, the catalogue reflects typical product specifications found in Chinese cotton textile exports, where ISO 9001 quality management and Oeko‑Tex Standard 100 are frequently adopted by manufacturers.