About Shenzhen Keborui Eletronics Co., Ltd - Electric Sensors Supplier in China

Shenzhen Keborui Eletronics Co., Ltd operates from Shenzhen, China and currently lists six active products in its catalogue. The portfolio includes three cable assemblies for medical monitoring equipment, one disposable SpO2 sensor, a fixed plate designed for a specific sensor model, and a universal four‑channel fixed plate made from galvanized steel (HS code 7210.49). Each item aligns with the supplier’s top categories of Electric Sensors, Computer Cables, Patient Monitors, Wires & Cables, Inductors & Transducers and Steel Plates. The catalogue explicitly names the Mindray Double Channel Dedicated IBP Cable, a Mindray‑to‑Braun IBP cable, a BD‑to‑B.Braun IBP adapter cable, the Nellcor Oximax DB9 9‑pin disposable SpO2 sensor, a Tuoren fixed plate for Tuoren sensors, and the universal fixed plate. The listed products fall under HS code families for electronic cables and steel plates, reflecting the supplier’s focus on medical‑grade connectivity and metal components.

The supplier’s active product count of six covers both electronic and metal hardware used in medical and industrial settings. Cable items are described without specific HS codes but are typical of the 8544 series for insulated electric conductors, while the steel plate is classified under HS 7210.49 for galvanized steel products. No additional product specifications such as voltage rating or dimensions are provided in the source data, limiting the description to the names and material stated.

Product Range and Specialties of Shenzhen Keborui Eletronics Co., Ltd

The catalogue’s three cable assemblies are designed for interfacing patient monitoring equipment, specifically IBP (invasive blood pressure) modules from manufacturers such as Mindray, Braun and BD. In the broader market, such cables are commonly manufactured to IEC 60227 standards, using PVC or LSZH insulation, with conductor gauges ranging from 24 AWG to 18 AWG and voltage ratings up to 250 V. Buyers typically verify parameters like connector pin configuration, shielding effectiveness and RoHS compliance. The Nellcor Oximax DB9 9‑pin disposable SpO2 sensor belongs to the medical sensor segment where single‑use sensors are produced to ISO 13485 quality management standards, with optical wavelengths around 660 nm and 940 nm and a typical accuracy of ±2 %. The Tuoren fixed plate and the universal four‑channel fixed plate are fabricated from galvanized steel, a zinc‑coated carbon steel commonly supplied to ASTM A123 specifications, with typical thicknesses from 0.5 mm to 2 mm and tensile strength around 400 MPa. Such plates are often used as mounting bases for sensors or transducers and are shipped in bulk or on pallets.

Trade and Export Information - Shenzhen Keborui Eletronics Co., Ltd

China is a major exporter of medical‑grade cables, sensors and steel components, with Europe, North America and Southeast Asia representing the largest import regions for these goods. Cable products usually fall under HS chapter 85 (e.g., 8544 for insulated conductors) and are subject to import inspections for compliance with RoHS, CE marking and, for medical applications, FDA 21 CFR 820. Steel plates classified under HS 7210.49 are typically shipped in 20‑foot or 40‑foot containers, packed in wooden crates or bulk pallets, and may require a material test certificate confirming zinc coating thickness. Exporters from China often work with freight forwarders to arrange FOB or CIF terms, and buyers should anticipate customs clearance procedures that check for proper HS code declaration and any required health‑device certifications.

Sourcing from Shenzhen Keborui Eletronics Co., Ltd - Buyer Guidance

When sourcing cable assemblies from this supplier, request a detailed datasheet that lists conductor gauge, insulation material, connector type, voltage rating and compliance certificates such as RoHS and IEC 60227 test reports. For the disposable SpO2 sensor, ask for a CE Declaration of Conformity and, if the end market is the United States, an FDA 510(k) clearance summary or equivalent. The galvanized steel plates should be accompanied by a mill test report (MTR) showing zinc coating weight and compliance with ASTM A123. Verify the HS code used for each item before finalising the purchase order to avoid tariff misclassification. Confirm minimum order quantities, lead times for tooling or custom lengths, and packaging details such as whether cables are coiled in anti‑static bags and plates are wrapped in moisture‑proof film.

What types of cable assemblies does Shenzhen Keborui Eletronics offer?

The supplier lists three medical‑grade IBP cable assemblies: a Mindray double‑channel cable, a Mindray‑to‑Braun adapter, and a BD‑to‑B.Braun IBP adapter. Each is intended for connecting invasive blood pressure transducers to patient monitors.

Are the cable products compliant with international standards?

The catalogue does not specify certifications, so buyers should request IEC 60227 compliance documentation and RoHS test reports to confirm that the cables meet standard electrical and environmental requirements.

What specifications are typical for the Nellcor Oximax DB9 disposable SpO2 sensor?

Disposable SpO2 sensors usually operate at dual wavelengths of 660 nm and 940 nm, have a measurement accuracy of ±2 % and are produced under ISO 13485 quality management. Buyers should ask for a CE declaration or FDA clearance, depending on the target market.

What material is used for the universal fixed plate and what documentation is needed?

The plate is made of galvanized steel (zinc‑coated) and is classified under HS code 7210.49. A mill test report confirming zinc coating thickness and compliance with ASTM A123 should be obtained before purchase.

Which regions typically import the supplier’s products?

Chinese exporters of medical cables and steel plates commonly ship to Europe, North America and Southeast Asian countries, where hospitals, medical device manufacturers and industrial equipment assemblers are the main buyers.

What packaging and shipping formats are standard for these items?

Cables are usually packed in anti‑static poly‑bags or cardboard boxes, while steel plates are wrapped in moisture‑proof film and stacked on pallets. Both product types can be loaded into 20‑ft or 40‑ft containers under FOB or CIF Incoterms.

What minimum order quantities and lead times should I expect?

The supplier’s catalogue does not list MOQ or lead times; buyers need to request this information directly, specifying whether custom lengths or specific connector configurations are required.

How can I verify the authenticity of the product certifications?

Ask the supplier to provide original certificates of conformity, test reports and, where applicable, third‑party inspection reports. Cross‑checking certificate numbers with issuing bodies (e.g., CE Notified Body, FDA) helps confirm authenticity before shipment.