About Worldwide Electric Stock Co., Ltd. - Electric Starters Supplier in China

Worldwide Electric Stock Co., Ltd. is based in China and currently lists eight distinct products. The catalogue focuses on high‑voltage and low‑voltage electrical control equipment, covering soft starters, switchgear cabinets, reactive power compensation units and power‑factor correction devices. Products such as the Wgqh series high‑voltage solid soft starter and the efficient high‑voltage motor soft starter belong to the electric starter segment, while items labelled 3 kV to 12 kV switchgear cabinet and electrical distribution panel board fall under high‑voltage switchgear and distribution hardware. All items are classified under the supplier’s top categories: Electric Starters, Agriculture, and Electric Circuit Components & Accessories.

The listed items reference voltage ranges from 3 kV up to 12 kV for switchgear and from low‑voltage levels for power‑factor correction devices. No HS codes are supplied in the catalogue, but the product descriptions align with HS chapter 85 groups for electrical apparatus for switching, control and protection. The supplier’s catalogue does not specify quantities, but each product is presented as a separate SKU within the eight‑item count.

Product Range and Specialties of Worldwide Electric Stock Co., Ltd.

The eight catalogue entries include a Wgqh series high‑voltage solid soft starter, a high‑voltage motor soft starter, high‑voltage switchgear cabinets and cubicle cabinets rated 3 kV‑12 kV, a reactive‑power compensation unit, a low‑voltage power‑factor correction device, and associated distribution panel boards. These items fall under the IEC 60947 family for low‑voltage switchgear and the IEC 61800 series for soft starters, with typical ratings such as 3 kV‑12 kV voltage, short‑circuit withstand currents of 10 - 30 kA, and thermal class F insulation.

In the broader industry, high‑voltage soft starters are commonly offered with adjustable ramp‑up times, harmonic‑filtering capabilities meeting IEC 61000‑4‑30, and efficiency levels above 95 %. Switchgear cabinets are usually tested to IEC 62271‑100 for high‑voltage switchgear, with standards for dielectric strength, mechanical endurance and fire resistance. Power‑factor correction devices typically target a correction range of 0.8‑0.95 lagging, with total harmonic distortion (THD) below 5 % as per IEC 61000‑3‑2.

Trade and Export Information - Worldwide Electric Stock Co., Ltd.

China is a major exporter of high‑voltage electrical equipment, and buyers in the Middle East, Africa, Southeast Asia and European renewable‑energy projects regularly import such switchgear and soft‑starter solutions. Products in this segment are classified under HS chapter 85, most often under heading 8537 for electrical apparatus for switching, control, protection or measuring, and heading 8504 for electrical transformers and converters. Importers typically request IEC conformity certificates, CE Declaration of Conformity, and where applicable UL or CSA approvals, especially for projects in Europe or North America.

Standard export logistics involve loading crated units on wooden pallets into 20‑ft or 40‑ft containers, using FOB Shanghai or CIF destination ports. Packaging must meet IEC 62040 requirements for electromagnetic compatibility during transport, and moisture‑resistant liners are common to protect against humidity. China’s export controls for high‑voltage equipment require end‑user declarations for certain voltage classes, which buyers should verify in the commercial invoice.

Sourcing from Worldwide Electric Stock Co., Ltd. - Buyer Guidance

When sourcing from Worldwide Electric Stock Co., Ltd., buyers should request IEC test reports for each device, a CE Declaration of Conformity and any applicable UL or CSA certificates. Technical datasheets should detail rated voltage, current, short‑circuit rating, efficiency, harmonic distortion and protection class. Verifying the supplier’s ISO 9001 audit report can further confirm quality‑management compliance before placing an order.

Buyers are advised to obtain a single‑unit sample for performance testing, especially for soft starters where load‑ramp characteristics are critical. Minimum order quantities are often one fully assembled cabinet, with lead times of four to eight weeks depending on configuration and final testing. Confirm packaging details - crating, palletisation and container size - to ensure safe delivery and compliance with Incoterms such as FOB Shanghai or CIF.

What types of high‑voltage equipment does Worldwide Electric Stock Co., Ltd. offer?

The supplier lists eight items, including a high‑voltage solid soft starter (Wgqh series), an efficient high‑voltage motor soft starter, 3 kV‑12 kV switchgear cabinets and cubicle cabinets, a reactive‑power compensation unit, a low‑voltage power‑factor correction device and related distribution panel boards.

Which standards should a buyer verify for the soft starters?

Buyers should request IEC 61800‑3 compliance for soft starters, along with IEC 60947‑4‑1 for the associated switching equipment. Harmonic‑distortion test reports meeting IEC 61000‑4‑30 are also commonly required.

What documentation is typically required before placing an order?

Standard documentation includes an IEC test report, a CE Declaration of Conformity, an ISO 9001 audit report, and a product data sheet showing rated voltage, current, efficiency and protection class.

What are common minimum order quantities and lead times for these items?

Suppliers of high‑voltage switchgear often set a minimum order of one fully assembled cabinet. Lead times usually range from four to eight weeks, depending on the specific configuration and testing schedule.

How are the products usually packaged for international shipment?

Items are typically crated, placed on wooden pallets and loaded into 20‑ft or 40‑ft containers with moisture‑resistant liners. Packaging complies with IEC 62040 requirements for electromagnetic compatibility during transport.

Which markets import Chinese high‑voltage switchgear most frequently?

The Middle East, Africa and Southeast Asian power utilities are the largest importers, followed by European renewable‑energy projects that require robust soft‑starter and switchgear solutions.

Can a buyer request a functional sample before a full order?

Yes, most manufacturers will provide a single‑unit sample for performance testing, provided the buyer supplies a testing plan and covers the shipping costs.

What Incoterms are commonly used for these products from China?

FOB Shanghai and CIF destination ports are the most frequently applied Incoterms for high‑voltage electrical equipment exported from China.