About Tailong Technology Co Ltd - Computer Cables Supplier in China

Tailong Technology Co Ltd is based in China and currently lists six distinct cable products in its catalogue. The active product count of six includes a USB card reader, IDE cable, USB hub, printer cable, data cable, and a USB 2.0 to IDE conversion cable. All items fall under the broader computer cables category, which is classified within electrical equipment and accessories for data transmission. The supplier’s catalogue does not provide HS‑code details, so the products are generally covered by the HS chapter for electrical machinery and equipment. The list reflects a focus on connectivity solutions for desktop and peripheral devices, covering both legacy interfaces such as IDE and newer USB standards.

The product set comprises both passive cables and an active hub, indicating capability to supply both point‑to‑point and multi‑port connections. USB‑related items are listed without specifying version beyond the USB 2.0 reference, while the IDE cable and its conversion variant target 40‑pin parallel ATA interfaces. The inclusion of a printer cable suggests compatibility with standard parallel or USB printer ports. Each entry is presented as a separate SKU, allowing buyers to select individual items rather than a bundled assortment. The catalogue’s limited size points to a niche offering rather than a full‑scale cable manufacturing line.

Product Range and Specialties of Tailong Technology Co Ltd

The six listed items cover common connection standards used in personal computers and peripheral equipment. USB products such as the card reader, hub, and USB 2.0‑to‑IDE cable typically conform to the USB 2.0 specification, supporting a maximum data rate of 480 Mbps and a standard connector pinout. IDE cables usually consist of 40‑pin flat ribbon or round‑wire types with lengths ranging from 18 cm to 1 m, designed for parallel ATA hard‑drive and optical‑drive connections. Printer cables often employ a DB‑25 or USB interface, with shielding to reduce electromagnetic interference. In the broader market, computer cables are graded by compliance with standards such as USB‑IF certification, IEC 61000 electromagnetic compatibility, and RoHS restriction of hazardous substances.

Buyers of computer cables normally verify parameters including conductor gauge (typically 28‑AWG for USB), insulation material (PVC or LSZH), shielding effectiveness, and connector durability measured by insertion/extraction cycles. For legacy IDE cables, key specifications include pin alignment tolerance and cable length accuracy, while USB hubs are evaluated for power distribution capability (e.g., 500 mA per downstream port). These technical criteria help ensure interoperability across a broad selection of hardware.

Trade and Export Information - Tailong Technology Co Ltd

China is a major exporter of computer cables, supplying North America, Europe, and Southeast Asia through sea freight and air cargo. Standard export packaging includes cardboard boxes with poly‑bag liners, often sized for 20‑ft or 40‑ft containers depending on volume. Buyers typically request compliance documents such as a test report for USB compliance (e.g., USB‑IF), RoHS declaration, and an IEC 60950‑1 safety certification for electronic accessories. Freight terms frequently use FOB Shanghai or Ningbo, with buyers arranging onward transport under CIF or DAP incoterms. Export controls in China require a customs declaration under HS Chapter 85, and shipments may be subject to inspection for electromagnetic compatibility.

Typical importers are system integrators, OEMs of desktop PCs, and distributors of office equipment. These markets prioritize consistent product dimensions, reliable connector mating, and documented test results to satisfy downstream quality audits. Seasonal demand peaks align with new hardware launch cycles in Q1 and Q3, influencing container loading schedules.

Sourcing from Tailong Technology Co Ltd - Buyer Guidance

When sourcing from Tailong Technology Co Ltd, buyers should request a detailed product specification sheet that lists USB version, cable length, conductor gauge, and shielding type for each item. Sample units are advisable to verify connector fit and signal integrity, especially for the USB‑to‑IDE conversion cable where pin alignment is critical. Request test reports confirming USB 2.0 compliance, RoHS conformity, and any applicable IEC safety assessments before placing larger orders. Verify the supplier’s packaging dimensions and weight per carton to calculate freight costs accurately, and confirm the preferred incoterm (e.g., FOB Shanghai).

Before finalizing a purchase, confirm the supplier’s lead time for each cable type; typical lead times for standard USB accessories range from 10 to 15 working days, while custom‑length IDE cables may require 20 days. Ensure that the supplier can provide CE marking documentation if the goods are intended for the EU market, and ask for a copy of the factory inspection report if required by your quality system. Assess the supplier’s ability to meet minimum order quantities, which for small‑batch electronic accessories often start at 500 units per SKU.

What types of computer cables does Tailong Technology Co Ltd list in its catalogue?

The catalogue includes a USB card reader, an IDE cable, a USB hub, a printer cable, a data cable, and a USB 2.0 to IDE conversion cable, all classified under computer connectivity products.

Are the USB products compliant with any international standards?

The USB items are described as USB 2.0, which aligns with the USB‑IF specification for 480 Mbps data rate. Buyers should request the supplier’s USB compliance test report to confirm certification.

What specifications should a buyer check for the IDE cable?

Key specifications include 40‑pin connector configuration, typical conductor gauge of 28‑AWG, cable length (commonly 18 cm to 1 m), and shielding material. Compatibility with parallel ATA devices should be verified.

Which certifications are commonly required for computer cables imported into the EU?

Importers usually request CE marking, RoHS declaration, and IEC safety test reports (e.g., IEC 60950‑1). These documents confirm compliance with EU directives.

What packaging formats are typical for these cable products?

Standard practice is to pack cables in poly‑bagged units placed inside cardboard boxes, with carton dimensions designed for stacking in 20‑ft or 40‑ft containers.

How can a buyer verify product quality before a large order?

Requesting a functional sample, reviewing the supplier’s test reports for USB compliance and RoHS, and checking connector durability specifications (e.g., insertion cycles) are common verification steps.