About Shah Steel Yard - Steel Bars Supplier in India

India is the source country for Shah Steel Yard, which lists 15 active mild steel products in its catalogue. The catalogue covers a spectrum of steel forms including bars, sheets, plates, pipes, beams, channels, and various shaped sections such as angels and T‑bars. Each entry is identified by an HS code in the 7200 - 7300 range, for example mild steel G.C sheets (HS 7210.49) and mild steel round pipe (HS 7306.30). The material descriptions specify hot‑dip galvanized, cold‑rolled, and standard carbon‑steel grades with carbon content typically between 0.15 % and 0.30 %. The supplier’s top categories are recorded as Steel Bars, Steel Sheets, Steel Pipes, Steel, Steel Wires and Steel Plates.

The listed products use mild steel conforming to Indian Standard IS 2062 or equivalent specifications such as S275JR for beams. Coating types include hot‑dip galvanizing and colour coating, while form types range from flat sheets to structural sections like channels (HS 7216.32) and T‑bars (HS 7214.20). Chemical composition limits are noted for carbon (0.15‑0.30 %) and manganese (0.60‑1.65 %) in several items. The HS codes differentiate between cold‑rolled coil (7209.18), hot‑dip galvanized wire (7217.20) and structural profiles, providing a clear classification for customs and trade documentation.

Product Range and Specialties of Shah Steel Yard

Shah Steel Yard’s catalogue contains mild steel products such as G.C. sheets (HS 7210.49), G.I. wires (HS 7217.20), round pipes (HS 7306.30), plates (HS 7208.51), cold‑rolled coil (HS 7209.18), round and square bars (HS 7214.99), beams (HS 7216.31), flats (HS 7208.37), angels (HS 7216.21), T‑bars (HS 7214.20), colour‑coated sheets (HS 7210.70), square pipes (HS 7306.61), Z‑angels (HS 7216.50), and channels (HS 7216.32). All items are described as mild or low‑carbon steel with carbon percentages between 0.15 % and 0.30 % and are either hot‑dip galvanized, cold‑rolled, or colour‑coated.

In the global steel market, mild steel of this carbon range is commonly supplied to construction, infrastructure and fabrication sectors. Typical grades include IS 2062 Grade A/B, ASTM A36, and EN 10025 S275, with mechanical properties such as tensile strength 400‑460 MPa and yield strength 250‑355 MPa. Cold‑rolled coils are usually offered in thicknesses from 0.2 mm to 3 mm and widths up to 1 250 mm, while hot‑dip galvanized wires are supplied in diameters from 2 mm to 20 mm with coating thickness around 40‑80 µm. Structural sections such as beams, channels and angels follow standard dimensions defined by IS 2062 and are shipped in bundles or on pallets suitable for 20‑ft and 40‑ft containers.

Trade and Export Information - Shah Steel Yard

India ranks among the top exporters of mild steel, with most shipments destined for the Middle East, Africa, Southeast Asia and Europe. HS chapters 72 and 73 are routinely inspected under customs regimes that require a commercial invoice, packing list and a mill test certificate. Buyers typically request compliance with ISO 9001 quality management, BIS certification for Indian steel, and where applicable CE marking for European markets. Standard export logistics involve loading coils or bundled sections onto 20‑ft or 40‑ft containers, often under FOB or CIF terms, with protective wrapping to prevent corrosion.

The product families listed by Shah Steel Yard fall under the same regulatory framework. For galvanized items (HS 7210.49, 7217.20) buyers often verify zinc coating weight and corrosion resistance according to ASTM A123. Cold‑rolled coil (HS 7209.18) is inspected for surface quality, flatness and thickness tolerance per ASTM A568. Colour‑coated sheets (HS 7210.70) may require additional fire‑retardant certifications for certain regions. Indian exporters generally adhere to the Export Inspection Council (EIC) guidelines, providing a Pre‑Shipment Inspection (PSI) report when requested.

Sourcing from Shah Steel Yard - Buyer Guidance

When sourcing from Shah Steel Yard, buyers should request the mill test certificate (MTC) that lists chemical composition, tensile strength, yield strength and elongation for each steel grade. For galvanized products, a coating weight report and zinc corrosion test results help confirm compliance with ASTM A123 or ISO 1461. Samples of coil, pipe or bar should be examined for dimensional tolerance, surface finish and flatness before confirming large orders.

It is advisable to verify that the HS code on the commercial invoice matches the product description, and to ask for any applicable BIS or ISO certificates that the supplier can provide. Typical packaging includes steel pallets, shrink‑wrapped bundles or coil drums, and buyers should confirm container loading plans to avoid damage during sea freight. Minimum order quantities in the Indian market often start at 5 metric tons per product, with lead times ranging from 15 to 30 days depending on the item and finishing requirements.

What mild steel product categories does Shah Steel Yard list?

The catalogue includes G.C. sheets, G.I. wires, round pipes, plates, cold‑rolled coil, round and square bars, beams, flats, angels, T‑bars, colour‑coated sheets, square pipes, Z‑angels and channels, each identified by a specific HS code.

Which HS codes correspond to the galvanized steel items?

Hot‑dip galvanized G.C. sheets use HS 7210.49, G.I. wires use HS 7217.20, and colour‑coated steel (often with a protective zinc primer) is listed under HS 7210.70.

What material standards are typical for the mild steel listed by this supplier?

The products are described as mild or low‑carbon steel, comparable to Indian Standard IS 2062 (Grade A/B), ASTM A36 and EN 10025 S275, with carbon content between 0.15 % and 0.30 %.

What documentation should a buyer request before placing an order?

Buyers should ask for a mill test certificate, coating weight report for galvanized items, any BIS or ISO quality certificates, and a packing list that matches the HS code of the product.

What are common packaging methods for these steel products?

Sheets and coils are typically shrink‑wrapped on pallets or loaded in steel drums, while bars, pipes and structural sections are bundled with steel straps and placed on wooden pallets for 20‑ft or 40‑ft container loading.

Which regions most often import mild steel from India?

Major import destinations include the United Arab Emirates, Saudi Arabia, Kenya, South Africa, Vietnam and several EU countries such as Germany and Italy.

What are typical lead times and minimum order quantities for these products?

Lead times generally range from 15 to 30 days after order confirmation, and minimum order quantities are commonly set at 5 metric tons per product, though larger structural sections may require higher volumes.